# Sign Regulations in West Palm Beach, Florida

Sign permit rules, size and height limits, setbacks, and ordinance citations for West Palm Beach, Florida, compiled by PermitPal from the jurisdiction's published municipal code.

- **Jurisdiction:** West Palm Beach, Florida (FL)
- **Canonical page:** https://permitpal.io/sign-regulations/florida/west-palm-beach
- **Data last verified:** 2025-08-21
- **Source:** [other municipal code](https://library.municode.com/FL/West_Palm_Beach/codes/Code_of_Ordinances?nodeId=PTIICOOR_CH34EN_ARTVIINAAR_S34-184MEADSI)

## At a glance

West Palm Beach, Florida regulates 155 sign types across 98 zoning districts. Freestanding Signs in the CC2 - City Center Lake Front zoning district are capped at 5 feet tall and 16 sq ft, with a 25 ft from right-of-way if provided. setback (Sec. Based on Sec. 94-219(o)(2) as applied to other dense/mixed-use zones; not specified but consistent with overall city signage regime for lakefront properties.). Most commercial signs in West Palm Beach require a permit.

## Sign rules by zoning district (98 zones)

| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
| --- | --- | --- | --- | --- |
| BMUD | 4 | 24 inches sign band; 6 inches on awning valance | Not to exceed 24 inches in height by 60% of the width of the building frontage. If the storefront uses awnings, the copy/logo on the valance shall not exceed 6 inches in height and counts towards max area. | — |
| BMUD-E | 4 | 24 inches sign band; 6 inches on awning valance | Not to exceed 24 inches in height by 60% of the width of the building frontage. If the storefront uses awnings, the copy/logo on the valance shall not exceed 6 inches in height and counts towards max area. | — |
| BPD-5 - Brelsford Park District - 5 | 4 | 36 inches | Not to exceed 36 inches in height by 60% of the length of the building frontage. | — |
| BPD-R - Brelsford Park District - Residential | 2 | 24 inches | 24 inches in height by 40% width of building facade | — |
| CAD-5 - Cultural Arts District - 5 | 4 | 36 inches | 100 square feet per sign (200 sq ft if bldg is 10+ stories), up to 2 per building (same name), only one per facade | — |
| CC2 - City Center Lake Front | 4 | 36 inches | 100 sq ft (per sign, 2 allowed per building, same building/tenant name). 200 sq ft if building is 10+ stories. | — |
| CLD-25 - Clearlake District - 25 | 3 | 36 inches | 100 sq ft (or 200 sq ft for buildings 10+ stories), up to 2 per building but only 1 per facade; must be same name/tenant. | — |
| CM - Commercial Marine | 2 | 36 inches | 100 sq ft, or 200 sq ft for buildings 10+ stories (2 per building, same identity, 1 per facade) | — |
| CMPD - Commercial Marine Planned Development | 1 | 36 inches | 36 inches by 60% of storefront/building width (subject to planned dev site plan) | — |
| CMUD-CORE I - Currie Mixed-Use District - Core I,CMUD-CORE IA - Currie Mixed-Use District - Core IA,CMUD-CORE II - Currie Mixed-Use District - Core II,CMUD-EDGE - Currie Mixed-Use District - Edge,CMUD-TRANSITION - Currie Mixed-Use District - Transition | 4 | 36 inches | 100 sq ft per sign, 2 allowed per building, 1 per facade; 200 sq ft if 10+ stories | — |
| CON - Conservation | 1 | Not specified, but not to create visual blight | As required for safety, wayfinding, or conservation education; typically <= 4 sq ft (directional/informational) unless otherwise approved | — |
| CP-CS - Coleman Park Community Service | 2 | 36 inches | 36 inches tall by 60% width of building or tenant facade; typically not to exceed 40 sq ft for an individual sign. | — |
| CP-H-NC - Coleman Park Historic District Neighborhood Commercial,CP-NC - Coleman Park Neighborhood Commercial | 2 | 36 inches | 40 sq ft per sign, one per facade, two per building if building on corner (one ID per facade) | — |
| CP-I - Coleman Park Industrial | 2 | 36 inches | 36 inches in height by 60% width of principal facade; typically not to exceed 40 sq ft per tenant as best practice | — |
| CP-MF14 - Coleman Park Multi-family 14,CP-MF14-C2 - Coleman Park Multi-family 14 historic context 2,CP-MF20 - Coleman Park Multi-family 20,CP-MF32 - Coleman Park Multi-family 32 | 2 | 36 inches | 36 inches in height by 60% building frontage, typically not to exceed 24 sq ft per entry as best practice for residential multi-family. | — |
| CP-NC - Coleman Park Neighborhood Commercial | 2 | 36 inches | 40 sq ft per sign, max 2 per building (1 per facade) | — |
| CP-POR - Coleman Park Professional Office Residential,CP-POR-C2 - Coleman Park Historic District Professional Office Residential context 2 | 3 | 4 feet | 16 sq ft | — |
| CP-ROS - Coleman Park Recreation and Open Space | 1 | As required for visibility (typically ≤6 feet) | ≤4 sq ft (standard); as needed for safety/education. | — |
| CP-SF11 - Coleman Park Single-family 11 | 2 | 6 feet (at entry) | 6 sq ft | — |
| CP-U - Coleman Park Utility | 1 | 6 feet (if freestanding); wall sign subject to height of face/parapet | ≤12 sq ft per utility building face | — |
| CPD - Commercial Planned Development | 1 | 36 inches | 36 inches height by 60% width of tenant facade, unless otherwise reduced by PD approval; total signage cap as per master plan | — |
| CS - Community Service, CSPD - Community Service Planned Development | 2 | 36 inches | 36 inches tall by 60% width; up to 40 sq ft per sign is typical for institutional/community entries (unless master plan is more restrictive). | — |
| CWD-10 - Clematis-Waterfront District - 10,CWD-5 - Clematis-Waterfront District - 5 | 3 | 36 inches | 100 sq ft; 200 sq ft if building is 10+ stories; up to 2 per building, 1 per facade, same name/identity | — |
| CS - Community Service | 2 | 36 inches | 36 inches tall by 60% width of principal facade; typical maximum 40 sq ft per sign face unless further restricted by site plan/overlay. | — |
| CWD-5 - Clematis-Waterfront District - 5,CWD-CD - Clematis-Waterfront District - Conservation District | 3 | 36 inches | 100 sq ft; 200 sq ft if 10+ stories; up to 2 per building (1/facade, same name/tenant) | — |
| FWD-5 - Flagler-Waterfront District - 5 | 2 | 36 inches | 100 sq ft (or 200 sq ft if 10+ stories); up to 2 per building, 1 per facade, same name/tenant | — |
| GC - General Commercial | 3 | 36 inches | 36 inches high x 60% of building frontage width | — |
| I - Industrial, IL - Industrial Light, IPD - Industrial Planned Development | 2 | 36 inches | 36 inches x 60% of building facade | — |
| LD-10 - Loftin District - 10, LD-4 - Loftin District - 4, LD-5 - Loftin District - 5, LD-R - Loftin District - Residential | 2 | 36 inches | 100 sq ft; 200 sq ft if 10+ stories. Up to two per building (one per facade, same name). | — |
| MF14 - Multifamily Low Density Residential, MF14-C1 - Historic Multifamily Low Density Residential, Context 1, MF14-C2 - Historic Multifamily Low Density Residential, Context 2, MF20 - Multifamily Medium Density Residential, MF20-C1 - Historic Multifamily Medium Density Residential, Context 1, MF32 - Multifamily High Density Residential, MF32-C1 - Historic Multifamily High Density Residential, Context 1 | 2 | 36 inches | 24 sq ft or lesser of 1% of building face | — |

_68 additional zoning districts are covered in PermitPal (free account)._

## Zone-by-zone sign requirements (sample of 3 of 98 zones)

### BMUD

| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Ordinance Citation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Sign Band (Wall Sign Equivalent) | 24 inches sign band; 6 inches on awning valance | Not to exceed 24 inches in height by 60% of the width of the building frontage. If the storefront uses awnings, the copy/logo on the valance shall not exceed 6 inches in height and counts towards max area. | 60% of the width of building frontage | — | — | On building facade within first two stories; on awning valance (also counts toward maximum area) | — | Sec. 94-219(o), BMUD sign standards; Sec. 94-220(e), BMUD-E sign standards. |
| Freestanding Sign (for buildings set back 25 ft+) | 5 feet | 16 square feet | — | — | 1 per qualifying property | Front setback | — | Sec. 94-219(o)(2) |
| Pedestrian Blade Sign | 3 feet (vertical dimension) | — | 4 feet | — | 1 per business with eligible entrance | Perpendicular to building facade; may be suspended from under balcony, arcade/colonnade, or marquee if 10 ft clearance below | — | Sec. 94-219(o)(3) |
| Window Signs (Special Sales/Events) | — | 15% of window area | — | — | — | Affixed to inside of windows | — | Sec. 94-219(o)(4) |

### CC2 - City Center Lake Front

| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Ordinance Citation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Building Identity Sign | — | 100 sq ft (per sign, 2 allowed per building, same building/tenant name). 200 sq ft if building is 10+ stories. | — | — | 2 per building (same name, 1 per facade) | On-building facade (not on residential facades if facing Flagler Drive, per design intent). | — | Sec. 94-110(c) (applies to Downtown urban core, includes CC2 regime). |
| External Sign Band (Wall Sign Equivalent) | 36 inches | 36 inches in height by 60% of facade/storefront width. | 60% width of side of building/storefront | — | — | On building facade/awning/canopy (first two stories only) | — | Sec. 94-110(c)(2) et al. |
| Pedestrian Blade Sign | 3 feet (vertical) | — | 4 feet | — | 1 per business | Perpendicular to building facade or under arcade/marquee/colonnade with proper clearance. | — | Sec. 94-110(c)(3) (applies citywide) |
| Freestanding Sign | 5 feet | 16 sq ft | — | 25 ft from right-of-way if provided. | 1 per qualifying building | Front setback (min 25 ft from right-of-way), nonresidential only. | — | Based on Sec. 94-219(o)(2) as applied to other dense/mixed-use zones; not specified but consistent with overall city signage regime for lakefront properties. |

### CMUD-CORE I - Currie Mixed-Use District - Core I,CMUD-CORE IA - Currie Mixed-Use District - Core IA,CMUD-CORE II - Currie Mixed-Use District - Core II,CMUD-EDGE - Currie Mixed-Use District - Edge,CMUD-TRANSITION - Currie Mixed-Use District - Transition

| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Ordinance Citation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Sign Band (Wall Sign Equivalent) | 36 inches | 36 inches in height by 60% of width of facade/storefront side | 60% width of building frontage (per side/facade) | — | — | On facade or on awning/canopy, within first two stories | — | Sec. 94-215(r), 94-110 (city downtown sign standards applied to all Currie Mixed-Use subdistricts) |
| Building Identity Sign | — | 100 sq ft per sign, 2 allowed per building, 1 per facade; 200 sq ft if 10+ stories | — | — | Up to 2 per building (same ID, 1 per facade) | Upper portion of building facade, not street-level | — | Sec. 94-215(r), 94-110(c) (for downtown/special districts; applied to all CMUD subdistricts) |
| Pedestrian Blade Sign | 3 feet vertical dimension | — | 4 feet | — | 1 per business/entrance | Perpendicular to building facade or under colonnade/canopy where permitted, with clearance. | — | Sec. 94-215(r); 94-110(c)(3) |
| Freestanding Sign (if bldg set back 25+ ft) | 5 feet | 16 sq ft | — | 25 ft | 1 per qualifying property | In front setback (at least 25 ft from right-of-way) | — | Sec. 94-219(o)(2) (as referenced in downtown/urban sign regimes) |

## Prohibited signs in West Palm Beach

- Prohibited signs include: audible, flashing, paper signs, internally illuminated box-signs, and signs with visible backs. Monument signs are prohibited except as expressly provided in the sign code.
- Signs must not produce noise such as audio tracks, sound effects, etc.
- Signs must not project video or have operations that flash, twinkle, zoom, revolve or resemble emergency/traffic lights.
- Internally illuminated box signs and exposed raceways, transformers, ballasts, and electrical wiring are prohibited.
- No sign may be painted directly onto a building facade, unless required as a mural and permitted accordingly.
- Signs must not unreasonably obstruct views from the street into storefront spaces (for window signage).
- Paper signs are prohibited.
- Monument signs are not permitted, except for certain locations specified in the code.
- No signs with visible backs are permitted.
- In all downtown master plan (DMP) districts/subdistricts: off-premises signage is prohibited.
- Within the DMP, building face area for signage and sign illumination is regulated and limitations apply as stipulated.
- Permanent and temporary window signage may not exceed 25 percent of the glazed area (some exceptions for vacant storefronts/urban lifestyle imagery).
- No monument, building, or wall-mounted sign shall be permitted if another of that type is already permitted for that frontage.
- Within certain neighborhoods, flashing, audible, or internally illuminated signs are prohibited.

## Signs exempt from permit in West Palm Beach

- Sign regulations in the sign code (Article XIII) shall not apply to official traffic control devices as defined by law.
- Signage incidental to the internal operation of government buildings, such as directory or instructional signs, is exempt if not viewable from the public right-of-way.
- Temporary signage required by government agencies for public safety or health is exempt.
- Residential landscape improvements for single-family dwelling units or for multifamily units up to ten units, with estimated permit value of less than $2,500.00, are exempt from landscape plan sign-off.
- Signs required or permitted to be posted by law or administrative regulation are exempt.
- The replacement of a sign copy on a legal nonconforming sign which does not affect the sign structure is exempt from needing additional sign approval, but the non-conforming sign structure cannot be enlarged or extended.

## Sign plan & submission notes

- Any petition for planned development district zoning (PDs) must be accompanied by a professionally prepared master development plan, including the sign plan and supporting information such as sign standards.
- Mixed-use districts (MU), especially NMUD, CMUD, BMUD, require neighborhood master plans adopted by the city commission. Such plans must include signage standards among other requirements.
- All planned developments (PDs), commercial planned developments, and some residential planned developments must submit a master sign plan as part of their development application materials.
- For any new or expanded planned development, sign standards are part of the approval process and must be included in master development documentation.
- Sign plans are required as part of master site or master development plan submissions for mixed-use and planned developments (including all necessary signage details and compliance with applicable district/sub-district standards).
- Site plan submittals and certain building permit applications (such as for brewpubs, microbreweries, etc.) require identification of all signage and compliance with location/loading areas.
- Sign plans must be reviewed and in compliance as part of any downtown master plan (DMP) district site plan approval.

## Full detail

This page publishes an overview of every zoning district plus a sample of 3 districts in full. Complete zone-by-zone requirements for all 98 zoning districts in West Palm Beach — every sign type, every field — are available with a free PermitPal account: https://app.permitpal.io/?address=West+Palm+Beach+FL&override=true&utm_source=landing&utm_medium=city-page&utm_campaign=city-west-palm-beach

---

PermitPal — AI sign code research. Full HTML page: https://permitpal.io/sign-regulations/florida/west-palm-beach