Sign Regulations in Bessemer, Alabama

Bessemer, Alabama has specific sign regulations covering 28 sign types across 7 zoning districts. Regulated sign types include Attached Wall Sign (Single-Tenant), Detached Sign (Single-Tenant), Detached Business Center Sign (Multi-Tenant). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Sign Regulation Overview for Bessemer, Alabama

Sample Sign Requirements in Bessemer

Sign TypeMax HeightMax AreaSetback
Nameplate Sign2 sq ft20' from right-of-way if ground sign
Identification Sign (Multiple-Family/Group Dwellings)9 sq ft
Institutional Sign (Churches, Schools, Public Buildings)20 sq ftAt least 1/2 required setback

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BessemerFull Coverage

Sign Types Covered

28

  • Attached Wall Sign (Single-Tenant)
  • Detached Sign (Single-Tenant)
  • Detached Business Center Sign (Multi-Tenant)
  • Temporary Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bessemer

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Bessemer vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Bessemer, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Bessemer, regulated sign types include Attached Wall Sign (Single-Tenant), Detached Sign (Single-Tenant), Detached Business Center Sign (Multi-Tenant), Temporary Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Bessemer vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Bessemer are regulated with specific requirements for brightness, animation, and message duration. Bessemer has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Bessemer Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Bessemer, Alabama sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Bessemer, Alabama Sign Rules at a Glance

Bessemer, Alabama regulates 28 sign types across 7 zoning districts. Off-Premises Sign/Billboards in the General Regulations For All Zones zoning district are capped at 40 ft tall, 672 sq ft per face, 1 face per pole/structure, and 48 ft wide, with a No part within setback setback (Sec. Sec. 11.15, 11.16(1)). Most commercial signs in Bessemer require a permit.

Detailed Sign Ordinance Requirements for Bessemer, Alabama

Sign Rules by Zoning District in Bessemer (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District106 ft40 sq ft
Planned Residential District1
Central Business District6Per general sign regulations (usually 18')150 sq ft per wall face
Business District, Office District, Specialty District618 ft (exceptions: 24' for hotels/hospitals/planned developments w/planning approval)150 sq ft per side per 250' frontage
Business District-Industrial518 ft (exceptions: 24' for hotels/hospitals/planned developments w/planning approval)150 sq ft per side per 250' frontage
Institutional District, Specialty District418 ft (exceptions: 24' for hotels/hospitals/planned developments w/planning approval)200 sq ft
General Regulations For All Zones1040 ft672 sq ft per face, 1 face per pole/structure

Zone-by-Zone Sign Requirements in Bessemer(sample of 3 of 7 zones)

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate Sign2 sq ft20' from right-of-way if ground sign1 per street frontageFlush to principal building or as ground sign not closer than 20' to right-of-wayUnlockSec. 11.10(1), 11.8(27)
Identification Sign (Multiple-Family/Group Dwellings)9 sq ft1 per street frontageFlush to principal buildingUnlockSec. 11.10(2)
Institutional Sign (Churches, Schools, Public Buildings)20 sq ftAt least 1/2 required setback1 per street frontageNot closer than 1/2 required setbackUnlockSec. 11.10(3)
Temporary Sign (Real Estate)6 ft6 sq ft1 per street frontageIn front, rear, or side yard up to the right-of-wayUnlockSec. 11.6(a), 11.16(3)
Temporary Sign (Election/Political)6 ft6 sq ft1 per street frontageIn front, rear, or side yard up to the right-of-wayUnlockSec. 11.6(d), 11.16(3)
Temporary Sign (Special Event)6 ft6 sq ft1 per street frontageIn front, rear, or side yard up to the right-of-wayUnlockSec. 11.6(e), 11.16(3)
Home Occupation Sign2 sq ft20' from right-of-way (if ground sign)1 per street frontageWall or ground, not closer than 20' to right-of-wayUnlockSec. 11.8(27)
Subdivision/Apartment Identification Sign (Detached)6 ft40 sq ft10' from right-of-way1 per street frontage10'+ from public right-of-way per frontageUnlockSec. 11.8(14)

Business District, Office District, Specialty District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Attached Wall Sign (Single-Tenant)Not above roof/building line100 sq ft (200 sq ft if frontage >100')Not to extend >14" over any setback (Sec. 11.16(5))Any number (subject to area cap)On wall of occupant/tenantUnlockSec. 11.12(1), 11.8(29)
Attached Wall Sign (Multi-Tenant)Not above building100 sq ft per tenant (200 sq ft if frontage >100')Not to extend >14" over setbackAny number per tenant (subject to area cap)On wall of occupant/tenantUnlockSec. 11.12(2)
Detached Sign (Single-Tenant)18 ft (exceptions: 24' for hotels/hospitals/planned developments w/planning approval)100 sq ft per side per 250' frontageAt least 10' from right-of-way; 5' from all side/rear property lines1 per 250' frontage (additional per qualifying street)Per street frontageUnlockSec. 11.12(3), 11.8(1), 11.8(29), 11.8(24)
Detached Business Center Sign (Multi-Tenant)18 ft (exceptions: 24' for hotels/hospitals/planned developments w/planning approval)150 sq ft per side per 250' frontageAt least 10' from right-of-way; 5' from side/rear property lines1 per 250' frontage (additional per qualifying street)Per street frontageUnlockSec. 11.12(4), 11.8(1), 11.8(29)
Subdivision/Apartment/Condominium Identification SignsWall: N/A; Detached: 6 ftSee general sign regulations (Sec. 11.8(13)-(14)): Wall: 36 sq ft total/development; Detached: 40 sq ft, 6 ft high, per frontageSee general sign regsPer general sign regulationsUnlockSec. 11.12(5), 11.8(13)-(14)
Temporary Sign6 ft32 sq ftSee above1 per event type per frontageNot within 10' of right-of-wayUnlockSec. 11.12(7), 11.6, 11.16(2)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Directional Sign (Permanent)30 inches (within 10' of ROW); 3.5 ft (>10' from ROW/in setback); 6 ft (not in setback)4 sq ftSee aboveOn-premises; see location & heightUnlockSec. 11.5(b), 11.8(2)
Directional Sign (Temporary Parking Area Exit/Entrance)4 sq ft (entrance/exit); 12 sq ft (conditions)1 per entrance/exitAt parking areas >4 carsUnlockSec. 11.9(1)
For Sale/For Rent (General, not temp)Up to 200 sq ft max20' from street lineGround or wall, not closer than 20' to street lineUnlockSec. 11.9(2)
Subdivision Sale Sign100 sq ftNot in required yard1On portion of subdivision for saleUnlockSec. 11.9(3)
Construction/Development Sign12 sq ft per contractor or 100 sq ft all names1 per contractor or 1 aggregateOn property under constructionUnlockSec. 11.9(4)
Agricultural Sale Sign9 sq ft1On premisesUnlockSec. 11.9(5)
Special Event Sign (Temporary)6 ft typical6 sq ft (residential); 32 sq ft (other districts)1 per street frontageOn premises, removed within time limitsUnlockSec. 11.9(7), 11.6(e)
Off-Premises Sign/Billboard40 ft672 sq ft per face, 1 face per pole/structure48 ftNo part within setback1 per pole/supportBusiness districts where permitted use only; must not be on parcel with other commercial useUnlockSec. 11.15, 11.16(1)

PermitPal covers all 7 zoning districts in Bessemer — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 7 zones for Bessemer — start free

Prohibited Signs in Bessemer

  • It is unlawful to erect, construct, enlarge, move, alter or convert any sign in the city without first obtaining a building permit for each sign, unless otherwise provided in the ordinance.
  • No detached sign exceeding permitted height limits shall be located, erected, or maintained in any district.
  • Roof-mounted signs are not permitted unless reviewed and approved by the zoning board of adjustments.
  • Attached signs shall not extend above the height of the building to which they are attached.
  • All signs, components, and supporting structures must be maintained in good repair and present a clean and finished appearance.
  • No sign, nor any part thereof, shall be erected or located in or project over any public right-of-way, except as otherwise provided by this article.
  • No sign shall display flashing, intermittent, rotating, or moving lights, or lights of changing degrees of intensity, visible from any public right-of-way, unless approved as an exception.
  • No sign shall revolve, be animated, or utilize movement or apparent movement in order to attract attention from the right-of-way.
  • Signs that copy, imitate, or approximate official traffic signs/devices with the intent to draw attention to a business/service/product are prohibited.
  • Signs that interfere with the view of street traffic or with official traffic signage are prohibited.
  • Signs which permit focused light onto a public street, highway, or another property in a manner that causes glare, impairment of vision, or constitutes a hazard are prohibited.
  • Signs on public property that are attached to or maintained upon trees, or painted/drawn upon rocks or other natural features are prohibited.
  • Signs incorporating noisy mechanical devices which emit sound audible over normal road noise to motorists are prohibited.
  • Signs failing to meet the standards of applicable building, electrical, wind load, or other relevant safety codes are prohibited.
  • Signs or supporting structures that obstruct or interfere with any door, escape, ventilation opening, or ingress/egress are prohibited.
  • Signs interfering with the necessary view for vehicular or pedestrian safety (e.g., blocking sight triangles) are prohibited.
  • No sign shall be erected or maintained in a location where, by reason of its position, wording, illumination, size, shape, or color, it may be confused with or obscure an authorized traffic control device.
  • No sign shall use any light, word, phrase, symbol, or design that would mislead or confuse traffic.
  • No sign with flashing, intermittent, or animated illumination is permitted within 300 feet of residential property unless not visible from such property.
  • No illuminated sign is permitted within 50 feet of residential property unless designed so that illumination does not shine or reflect on such property.
  • No business or advertising ground sign shall exceed 50 feet in length.
  • All outdoor advertising structures, including billboards, must conform to district side/rear yard requirements and be set back at least 100 feet from residential districts.
  • No sign shall be placed in a public right-of-way, except publicly owned signs.
  • Trailer (portable) signs may not be installed on premises, except by board of zoning adjustments approval for temporary purposes and limited duration.
  • No sign shall be erected/maintained if it fails to meet the Standard Building Code, National Electrical Code, or other codes enforced by the city.
  • No person shall place or erect a temporary sign within a street right-of-way, or attach it to any utility pole, nor place or erect any sign upon another's property without consent.
  • No person may enlarge or alter a conforming sign to cause a nonconforming condition, nor add illumination to a conforming sign.
  • Nonconforming signs may not be increased in nonconformity, structurally altered to prolong life, moved, replaced, re-established after abandonment/destruction beyond set thresholds, or have message altered unless permitted.
  • No new detached sign may be erected where an existing nonconforming detached sign remains, unless the latter is removed or brought into conformance except for certain off-premise signs.
  • No sign permit shall be issued for any premises where an unsafe or obsolete sign exists until such sign is removed or brought into compliance.

Exempt Signs in Bessemer

  • Signs not exceeding two (2) square feet in area denoting name, address, or business hours of occupant.
  • On-premises directional signs not exceeding four (4) square feet and meeting specified height/setback conditions.
  • Signs fully located within the interior of any building or stadium or within an enclosed lobby/court.
  • Publicly owned memorial tablets or signs.
  • Signs painted on or attached to currently licensed motor vehicles, provided the primary function of the vehicle is transport and not advertising.
  • Signs proclaiming religious, political, or other non-commercial messages (other than those regulated by section 11.6), not exceeding one per abutting street, not exceeding sixteen (16) square feet, and not internally illuminated.
  • Integral decorative or architectural features of buildings or works of art, provided they do not contain moving/flashing parts or lights.
  • Small changeable signs over gasoline pump islands illustrating current gasoline pricing.

Sign Plan & Submission Notes for Bessemer

  • Roof-mounted signs require review and approval by the zoning board of adjustments.
  • Electronic message signs (flashing/intermittent illumination) may be allowed in non-residential districts upon approval by the zoning board of adjustments.
  • Changeable message signs (manual or electronic) may be permitted in non-residential districts as a special exception.
  • Trailer (portable) signs may only be installed for temporary purposes (up to 90 days, with possible 60 day extension) upon review and approval by the board of zoning adjustments, with additional restrictions.
  • Externally illuminated signs may be allowed in a residential district as an exception by the zoning board of adjustment.
  • Additional sign area for hotels, hospitals, and planned developments may be allowed in accordance with a development plan approved by the planning and zoning commission.
  • Signs permitted in planned residential districts will be determined as part of the development plan review process.
  • Appeals of permit denial may be taken to the board of adjustment.
  • No specific master sign plan or comprehensive sign plan is explicitly referenced, but various exceptions, variances, and additional sign area allowances are tied to review/approval by zoning board of adjustment or planning and zoning commission.

Source: municode municipal code