Sign Regulations in Queen Creek, Arizona
Queen Creek, Arizona has specific sign regulations covering 23 sign types across 12 zoning districts. Regulated sign types include Wall Sign, Address Sign, On-Site Directional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: December 10, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Queen Creek, Arizona
Sample Sign Requirements in Queen Creek
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| On-Site Directional Sign | 4 feet (freestanding) | 3 square feet | Not listed |
| Menu Board | 6 feet (building-mounted); 8 feet (freestanding) | 24 square feet (standard); 12 square feet (preview) | Not listed |
| Window Sign | Not listed | 100% of aggregate window area | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
23
- Wall Sign
- Address Sign
- On-Site Directional Sign
- Menu Board
- +2 more types
Zoning Districts
12
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Queen Creek
Other Cities in Arizona
Frequently Asked Questions
In Queen Creek, the height limit for Freestanding Sign - Commercial Center in the Residential Commercial District (RC) and other zoning districts is 8 feet (Sec. 7.2.A.4.c.2). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Queen Creek require a permit. From the submission notes on this page: Amendments to an approved Comprehensive Sign Plan: Minor amendments (up to 10% change without increasing number of signs) may be approved administratively by the Planning Administrator; major amendments are processed like the initial submittal. Run a code check for an exact address to see the permit requirements for that zone.
Queen Creek's sign code covers 23 sign types, including Wall Sign, Address Sign, On-Site Directional Sign, and Menu Board. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Home occupation signs do not require a building permit. The full list is on this page.
This page doesn't list a single setback distance for signs in Queen Creek. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Queen Creek's sign ordinance that cover digital, changing, or flashing signs: Animated signs are not allowed, except for approved pennants, banners, flags, revolving barber poles, and clocks that alternately display time and temperature with a maximum face area not exceeding three square feet. Flashing signs other than those which alternately display time and temperature, and are a maximum of three square feet in area. Interior window signs (non-electronic or neon, maximum two square feet, not higher than six feet from finished grade) do not require a sign permit. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Queen Creek Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Queen Creek, Arizona, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Queen Creek, Arizona Sign Rules at a Glance
Queen Creek, Arizona regulates 23 sign types across 12 zoning districts. Interior Window Signs are capped at 6 feet from finished grade and 2 square feet (Sec. 7.2.A.10). Most commercial signs in Queen Creek require a permit.
Detailed Sign Ordinance Requirements for Queen Creek, Arizona
Sign Rules by Zoning District in Queen Creek (12 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 4 | 6 feet (building-mounted); 8 feet (freestanding) | 100% of aggregate window area | Not listed |
| Residential Zoning Districts (excluding MDR and HDR) | 4 | 20 feet | 32 square feet | Not listed |
| Medium Density Residential District (MDR), High Density Residential District (HDR) | 2 | 6 feet | 250 square feet (total) | Not listed |
| Residential Commercial District (RC), Downtown Core District (DC), Light Commercial District (C-1) | 6 | 8 feet | 150 square feet (total per business) | Not listed |
| Agritainment District (AT) | 3 | 8 feet | 150 square feet (total) | Not listed |
| General Commercial District (C-2) | 6 | 8 feet | 150 square feet | Not listed |
| Regional Commercial Center District (C-3) | 1 | Not listed | Not listed | Not listed |
| Office/Industrial Park (EMP-A), General Industrial District (EMP-B) | 3 | 8 feet | 150 square feet | Not listed |
| Planned Community District (PCD), Mixed Use District (MU) | 1 | Not listed | Not listed | Not listed |
| Public/Quasi Public District (P/QP) | 3 | 48 inches | 2 square feet | Not listed |
| R-3, R-4 | 2 | 6 feet | 250 square feet | Not listed |
| NC | 2 | 6 feet | 150 square feet | Not listed |
Zone-by-Zone Sign Requirements in Queen Creek(sample of 3 of 12 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| On-Site Directional Sign | 4 feet (freestanding) | 3 square feet | Not listed | Not listed | As needed | Internal to site | Not listed | Unlock | 7.2.H |
| Menu Board | 6 feet (building-mounted); 8 feet (freestanding) | 24 square feet (standard); 12 square feet (preview) | Not listed | Not listed | 2 per drive-thru lane | For drive-thru restaurants, not adjacent to public ROW | Not listed | Unlock | 7.2.I |
| Window Sign | Not listed | 100% of aggregate window area | Not listed | Not listed | N/A | Street level, first story | Not listed | Unlock | 7.2.G |
| Interior Window Sign | 6 feet from finished grade | 2 square feet | Not listed | Not listed | 1 per business | Interior of window in non-residential districts | Not listed | Unlock | 7.2.A.10 |
Residential Commercial District (RC), Downtown Core District (DC), Light Commercial District (C-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Address Sign | Not listed | Not listed | Not listed | Not listed | 1 per building | Readily visible from the street | Not listed | Unlock | 7.2.A.5.b |
| Freestanding Sign - Individual Building | 6 feet | 40 square feet | Not listed | Not listed | 1 per street frontage (2 if 600+ ft separated by 300 ft; +1 per additional 300 ft) | Per street frontage | Not listed | Unlock | 7.2.A.5.d |
| Wall Sign - Individual Building | Not listed | 150 square feet (total per business) | Not listed | Not listed | As per formula | Front, side, rear walls | Not listed | Unlock | 7.2.A.5.e-j,l |
| Freestanding Sign - Commercial Center | 8 feet | 48 square feet | Not listed | Not extend or project over street or alley line | 1 per street frontage (2 if 600+ ft separated by 300 ft; +1 per additional 300 ft) | Ground-mounted per street frontage | Not listed | Unlock | 7.2.A.4.c.2 |
| Wall Sign - Commercial Center | Not listed | 150 square feet (total per business) | Not listed | Not listed | 1 per use/building | Building mounted for each permitted use/principal building | Not listed | Unlock | 7.2.A.4.c.1; 7.2.A.4.b |
| Projecting Sign - DC Only | Not listed | 12 square feet | Not listed | No projection into public ROW except approved 12 inches | N/A | Attached to front face of building | Not listed | Unlock | 7.2.B.9 |
General Commercial District (C-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign - Individual or Center | 8 feet | 48 square feet | Not listed | Not listed | 1 per street frontage (2 if 600+ ft sep 300 ft; +1 per 300 ft) | Ground-mounted per street frontage | Not listed | Unlock | 7.2.A.6.b; 7.2.A.4.c.2 |
| Wall Sign - Individual or Center | Not listed | 150 square feet | Not listed | Not listed | As per formula | Walls | Not listed | Unlock | 7.2.A.6.e-j; 7.2.A.4 |
| On-Site Directional Sign | 4 feet (freestanding) | 3 square feet | Not listed | Not listed | As needed | Internal to site | Not listed | Unlock | 7.2.H |
| Menu Board | 6 feet (building-mounted); 8 feet (freestanding) | 24 square feet (standard); 12 square feet (preview) | Not listed | Not listed | 2 per drive-thru lane | For drive-thru restaurants, not adjacent to public ROW | Not listed | Unlock | 7.2.I |
| Window Sign | Not listed | 100% of aggregate window area | Not listed | Not listed | N/A | Street level, first story | Not listed | Unlock | 7.2.G |
| Interior Window Sign | 6 feet from finished grade | 2 square feet | Not listed | Not listed | 1 per business | Interior of window in non-residential districts | Not listed | Unlock | 7.2.A.10 |
PermitPal covers all 12 zoning districts in Queen Creek. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Queen Creek
- Animated signs are not allowed, except for approved pennants, banners, flags, revolving barber poles, and clocks that alternately display time and temperature with a maximum face area not exceeding three square feet.
- Flashing signs other than those which alternately display time and temperature, and are a maximum of three square feet in area.
- Signs emitting sound or any substance are not allowed.
- The tacking, painting, pasting or otherwise affixing of signs or posters visible from a public way to any trees, fences, utility poles or other structures, or upon vehicles where such vehicles are used primarily as support for such signs, is prohibited.
- Any form of remote signage, such as off-premises advertising signs or billboards, are prohibited.
- Signs with exposed raceways, except where determined by the Planning Administrator that it is not structurally feasible to install a sign without using an exposed raceway.
- Pole signs and/or roof signs except as specifically approved when it is determined that a ground or wall sign is not feasible due to site limitations and/or line of sight interruptions for vehicular traffic.
- Wall-mounted cabinet signs are prohibited, unless the sign utilizes a stylized cabinet shape or molded sign face with embossed copy or sign copy in relief.
- Signs identifying a business in a non-residential zoning district are not permitted on building facade adjacent to a shared zoning district boundary with a residential zoning district (not applicable when the zoning district boundary is a public right-of-way).
- Signs attached to a vehicle primarily for the purposes of advertising, with such vehicle placed adjacent to a roadway and not used for the typical conduct of the business so advertised.
- All forms of signage shall be prohibited from roadway medians including, but not limited to, bandit signs, political signs, and directional signs not related to Town traffic regulations or directions.
- No signs (temporary or permanent) shall be erected or maintained within the sight visibility triangle or at any location where, by reason of its position, shape, color or illumination, it may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device.
- No sign shall be erected or painted upon or attached to any tree, rock or other natural feature, or to any fence post, or utility pole or structure.
- Every illuminated sign shall be so placed as to prevent any light or reflection from being cast directly on any adjoining Residential district.
Exempt Signs in Queen Creek
- Home occupation signs do not require a building permit.
- Temporary signs do not require a building permit.
- Minor repair or repainting of any permitted sign does not require a building permit, unless otherwise provided.
- Political and campaign signs do not require a sign permit.
- Interior window signs (non-electronic or neon, maximum two square feet, not higher than six feet from finished grade) do not require a sign permit.
- Window signs up to 100% of aggregate window area (street level, first story only) do not require a sign permit.
- On-site directional signs do not count against the total allowed sign area for a given site, building or occupancy, unless indicated otherwise.
- Signs or notices required or posted by a government agency shall not be counted towards the number of signs permitted and do not require a building permit.
- Historic signs certified by the Town Council may be utilized in all zoning districts subject to restoration guidelines.
Sign Plan & Submission Notes for Queen Creek
- A Comprehensive Sign Plan is required prior to issuance of Sign Permits for any business or occupancy in a commercial center or complex (RC, AT, DC, C-1, C-2, C-3, EMP-A, EMP-B) with three or more stand-alone buildings, detailing size, type, location, and color of all signage.
- A Comprehensive Sign Plan that proposes a deviation from requirements must be reviewed and approved by the Planning and Zoning Commission.
- Sign standards for developments in PCD, MU, and C-3 districts shall be established as part of a Comprehensive Sign Plan.
- A Comprehensive Sign Plan is intended to provide flexibility for standards that may not meet specific requirements, promoting superior design while maintaining general conformance with zoning district requirements; deviations or electronic signage require Planning and Zoning Commission approval.
- Amendments to an approved Comprehensive Sign Plan: Minor amendments (up to 10% change without increasing number of signs) may be approved administratively by the Planning Administrator; major amendments are processed like the initial submittal.
- Sign standards in the Downtown Core (DC) district shall conform to DC Design Guidelines and Chapter 7 of the Design Standards; alternative standards meeting the intent may be considered by the Planning Administrator, who makes final determination in conflicts.
- Specialty signage (awning, canopy, neon, etc.) may be permitted subject to permit and design review as part of a Comprehensive Sign Plan.
- Projecting signs may be permitted in TC and AT districts or as part of an approved Comprehensive Sign Plan.
Source: other municipal code