Sign Regulations in Heber Springs, Arkansas

Heber Springs, Arkansas has specific sign regulations covering 23 sign types across 6 zoning districts. Regulated sign types include Wall Sign, Subdivision Identification Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 6, 2025

Sign Regulation Overview for Heber Springs, Arkansas

Sample Sign Requirements in Heber Springs

Sign TypeMax HeightMax AreaSetback
Freestanding Sign30 feetSet back at least 1/4 the required building setback or as specified, minimum 5 feet from any easement.
Ground Sign4 feet standard, 10 feet if integrated into architectural feature80 sq ft (if integrated into permanent, landscaped architectural feature), else per zone
Construction Sign32 sq ftSetback at least 15 ft from property/right-of-way line.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Heber SpringsFull Coverage

Sign Types Covered

23

  • Wall Sign
  • Subdivision Identification Sign
  • Projecting Sign
  • Freestanding Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Heber Springs

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Heber Springs, monument signs are limited to 30 feet. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Heber Springs, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Heber Springs, regulated sign types include Wall Sign, Subdivision Identification Sign, Projecting Sign, Freestanding Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

In Heber Springs, monument signs typically require a Set back at least 1/4 the required building setback or as specified, minimum 5 feet from any easement. setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.

Digital and LED signs in Heber Springs are regulated with specific requirements for brightness, animation, and message duration. Heber Springs has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Heber Springs Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Heber Springs, Arkansas sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Heber Springs, Arkansas Sign Rules at a Glance

Heber Springs, Arkansas regulates 23 sign types across 6 zoning districts. Political Sign (Residential Zone)s in the General Regulations For All Zones zoning district are capped at 4 ft (signs above this must be set back 10 ft from property/right-of-way) tall and 9 sq ft, with a Signs over 4 ft in height/set back at least 10 ft from property line/right-of-way setback (Sec. 11.52.05(J), 11.52.11(E), 11.52.07(G)). Most commercial signs in Heber Springs require a permit.

Detailed Sign Ordinance Requirements for Heber Springs, Arkansas

Sign Rules by Zoning District in Heber Springs (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1435 feet or such that it does not extend beyond property line/into public sidewalk during winds80 sq ft (if integrated into permanent, landscaped architectural feature), else per zone
Residential Zones332 sq ft
Commercial C-1 Zone480 sq ft
Commercial C-2 Zone330 feet150 sq ft
Industrial I-I Zone2200 sq ft
Planned Unit Development (PUD) Zone1

Zone-by-Zone Sign Requirements in Heber Springs(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign30 feetSet back at least 1/4 the required building setback or as specified, minimum 5 feet from any easement.1 per street frontage.On premise, within property lines; not in street right-of-way.Unlock11.52.02(G); 11.52.05(B)
Ground Sign4 feet standard, 10 feet if integrated into architectural feature80 sq ft (if integrated into permanent, landscaped architectural feature), else per zoneOn premise; must not obstruct traffic view.Unlock11.52.05(C)
Construction Sign32 sq ftSetback at least 15 ft from property/right-of-way line.1 per street frontageOn premises of work under constructionUnlock11.52.05(D); 11.52.11(B)
Subdivision Identification Sign32 sq ftSetback at least 15 ft from property/right-of-way line.1 per neighborhood/subdivision/developmentOn premises of subdivisionUnlock11.52.05(E); 11.52.12(C)
Directional Sign6 sq ftNo more than 2Within 0.5 mile of property; not more than 2 allowed.Unlock11.52.05(F)
Political Sign (Residential Zone)4 ft (signs above this must be set back 10 ft from property/right-of-way)9 sq ftSigns over 4 ft in height/set back at least 10 ft from property line/right-of-wayOn private propertyUnlock11.52.05(J), 11.52.11(E), 11.52.07(G)
Political Sign (Commercial Zone)4 ft (signs above this must be set back 10 ft)32 sq ftSigns over 4 ft in height/set back at least 10 ft from property line/right-of-wayOn private propertyUnlock11.52.05(J)
Real Estate Sign (Residential Zone)9 sq ftIf freestanding, at least 15 ft from right-of-way unless attached to building.1 per street frontagePer street frontage (each side of structure facing public street); On premise onlyUnlock11.52.05(K); 11.52.07(D); 11.52.11(C)

Residential Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign (Home Occupation)4 sq ft1 per home occupationPhysically attached to residence structureUnlock11.52.12(E); 11.52.07(E)
Special Use Identification Sign (apartments, schools, churches, etc.)32 sq ftOn premise of special use (e.g. apartment, school, church, hospital, park, farm, etc.)Unlock11.52.12(B)
Subdivision Identification Sign32 sq ft1 per neighborhood/subdivision/developmentPer subdivision/neighborhood/developmentUnlock11.52.12(C)

Commercial C-1 Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign80 sq ftFront wall of building; see General Regulations for details.Unlock11.52.13(A)(2); 11.52.05(A)
Projecting Sign8 sq ftAttached to wall; over sidewalkUnlock11.52.13(A)(3)
Freestanding Sign (Single Tenant)80 sq ft (up to 120 sq ft w/ sufficient frontage)At least 10 ft from adjoining property lines and front property or ROW line.1 per lot or per commercial street frontage; 2 for corner lotsPer lot or per commercial street frontage. Corner lots: one additional sign on second frontage.Unlock11.52.13(A)(4)
Freestanding Directory Sign (Multi-Tenant/Joint)80 to 200 sq ft (see formula)At least 10 ft from property or ROW line.1 per street frontageOne per street frontage. Setback at least 10 ft from property/ROW. Used for directory/joint identification.Unlock11.52.13(A)(5)

PermitPal covers all 6 zoning districts in Heber Springs — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 6 zones for Heber Springs — start free

Prohibited Signs in Heber Springs

  • Signs must not become dilapidated and must be maintained in good condition.
  • Illumination devices must not cast rays directly into any residential zone, sleeping room, or into the eyes of a vehicular driver.
  • Only signs installed or authorized by the state, county, or city may be placed on public right-of-way.
  • No advertising sign shall be erected within fifty (50) feet of any adjoining residential zone boundary line if the sign faces perpendicular to the street.
  • No flashing sign of any type shall be erected within one hundred fifty (150) feet of an adjoining residential zone boundary line if the sign face is perpendicular to the street.
  • No sign may be painted, pasted, or similarly posted directly on the surface of any wall, or placed on any wall, fence, or standard facing the side of any adjoining lot in any residential zone.
  • All signs must be erected within the property lines of the premises on which they are located; no portion of a freestanding sign may extend or be placed in any street right-of-way.
  • Structural pylons and supports must be set back from the property line or right-of-way line at least one-fourth the required building setback or at least five (5) feet from any easement, whichever is greater.
  • Signs that may be in conflict with public traffic signals are not permitted.
  • No sign or device may imitate or resemble an official traffic control device, emergency light, or railroad sign, nor hinder the effectiveness of any traffic control device.
  • Signs and sign structures attached to the wall of any building shall not extend more than six (6) feet above the roofline.
  • No sign may be constructed in a way that interferes with or extends into contact with any overhead wires.
  • No truck, automobile, trailer or boat, modified to advertise a commercial business or product, may be parked on a public lot or right-of-way as permanent or semi-permanent advertisement.
  • All electric signs must be installed by a person with a state electric sign license.
  • No sign shall display intermittent lights resembling those customarily used in traffic/police/emergency signals, or use misleading words or symbols.
  • No sign, except official traffic/information signs, is permitted within any street or highway right-of-way.
  • No signs painted on/attached to trees, fence posts, telephone/utility poles, rocks, or other natural features, or painted on roofs of buildings.
  • No fluttering ribbons, banners, or similar devices within the front yard setback, except government flags.
  • Billboards are not permitted within the city limits.
  • Hand-tacked signs are prohibited.
  • Temporary signs, except as allowed under specific provisions, are prohibited.
  • Off-premises signs are prohibited except as permitted elsewhere in the ordinance.
  • Portable signs are prohibited except as allowed under specific provisions of the ordinance.

Exempt Signs in Heber Springs

  • Official traffic or governmental signs.
  • The copy and message of signs.
  • Window displays.
  • Product dispensers.
  • Scoreboards on athletic fields.
  • Advertising at public athletic fields.
  • Flags of any nation, government, or non-commercial organization.
  • Gravestones.
  • Barber poles.
  • Religious symbols.
  • Commemorative signs, tablets, or plaques approved by the City Council.
  • Signs required to be maintained by law or government order, rules or regulation.
  • The display of street numbers.
  • Any display or construction not defined as a sign.
  • Off-premise open-house signs for the day on which the open-house is conducted.

Sign Plan & Submission Notes for Heber Springs

  • A permit is required for the erection, alteration, or reconstruction of any sign unless otherwise noted, and must be approved by the Planning and Zoning Commission or duly appointed.
  • All permit applications must include information such as height, face detail, structure/support, location, and property details; Planning and Zoning Commission approval is required.
  • All requests for sign permits must be approved by the Planning and Zoning Commission or duly appointed.
  • Any appeals, deviations, or variances from the literal requirements must be heard and decided by the Planning and Zoning Commission, which may impose reasonable conditions.
  • Signs in the PUD (Planned Unit Development) zone shall be approved as part of the approval process for the development.

Source: municode municipal code