Questions? Call us at (262) 218-2915

Sign Regulations in Brisbane, California

Brisbane, California has specific sign regulations covering 27 sign types across 6 zoning districts. Regulated sign types include Sale or Rental Sign, Off-Site Open House Sign, Identification Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Brisbane, California

Sample Sign Requirements in Brisbane

Sign TypeMax HeightMax AreaSetback
Sale or Rental SignNot listed6 sq. ft.Not listed
Off-Site Open House SignNot listed6 sq. ft.Not listed
Identification SignNot listed1 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BrisbaneFull Coverage

Sign Types Covered

27

  • Sale or Rental Sign
  • Off-Site Open House Sign
  • Identification Sign
  • Residential Home Occupation Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Brisbane

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Brisbane, the height limit for Freestanding Sign - Monument (6 ft. or more in height) in the Nonresidential Districts is 6 ft. or more. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Brisbane require a permit. From the submission notes on this page: A sign program is required for property subject to a specific plan adopted pursuant to Sections 65450-65457 of the Government Code. Run a code check for an exact address to see the permit requirements for that zone.

Brisbane's sign code covers 27 sign types, including Sale or Rental Sign, Off-Site Open House Sign, Identification Sign, and Residential Home Occupation Sign. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Identification signs may be installed without obtaining a sign permit if they fully comply with applicable requirements. The full list is on this page.

We haven't published Brisbane's sign setback rules on this page yet. Run a code check for an exact address to see them.

Brisbane's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Brisbane Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Brisbane, California, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Brisbane, California Sign Rules at a Glance

Brisbane, California regulates 27 sign types across 6 zoning districts. Construction Signs are capped at 100 sq ft. Most commercial signs in Brisbane require a permit.

Detailed Sign Ordinance Requirements for Brisbane, California

Sign Rules by Zoning District in Brisbane (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts4Not listed6 sq. ft.Not listed
Nonresidential Districts16<6 ft.Up to 100 sq. ft. (greater allowed by sign program only). See Figure 17.36.020A for smaller frontages.Not listed
Residential Districts (Multifamily Residential Uses)14 ft. max for freestanding signs10 sq. ft. (frontage <100 ft); 20 sq. ft. (frontage ≥100 ft); 8 sq. ft. for secondary frontageNot listed
Residential Districts (Nonresidential Uses in Residential Districts)1Not listed20 sq. ft.Not listed
General Regulations For All Zones4Not listedUp to 100 sq.ft.Not listed
General Plan Subareas (Southeast Bayshore), General Plan Subareas (Northeast Bayshore), General Plan Subareas (Northwest Bayshore north of Main Street), General Plan Subareas (Beatty), General Plan Subareas (Baylands), General Plan Subareas (Southwest Bayshore)2Not listedSee Figure 17.36.020A for size by frontageNot listed

Zone-by-Zone Sign Requirements in Brisbane(sample of 3 of 6 zones)

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Sale or Rental SignNot listed6 sq. ft.Not listedNot listed1 per unitOn site of the residential unitNot listedUnlockTable 17.36.020
Off-Site Open House SignNot listed6 sq. ft.Not listedNot listedNot listedOff-siteNot listedUnlockTable 17.36.020
Identification SignNot listed1 sq. ft.Not listedNot listed1 per unitOn unitNot listedUnlockTable 17.36.020
Residential Home Occupation SignNot listed3 sq. ft.Not listedNot listed1 per permitOn-site for home occupationNot listedUnlockTable 17.36.020

Nonresidential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Sale or Rental SignNot listed16 sq. ft.Not listedNot listed1 per unitOn site of nonresidential propertyNot listedUnlockTable 17.36.020
Wall SignNot listedUp to 100 sq. ft. (greater allowed by sign program only). See Figure 17.36.020A for smaller frontages.Not listedNot listedNot listedParallel and attached to wall of buildingNot listedUnlockTable 17.36.020, Figure 17.36.020A
Projecting SignNot listed15 sq. ft. (sign area measured for one side only)Not listedNot listed1 per siteProjected from wall; public right-of-wayNot listedUnlockTable 17.36.020
Awning SignNot listedSee Figure 17.36.020A (area measured for front and one side only)Not listedNot listedNot listedOn surface of awning coveringNot listedUnlockTable 17.36.020
Window Sign (Permanent - more than 1 sq. ft.)Not listedSee Figure 17.36.020ANot listedNot listedNot listedAffixed on or within windowNot listedUnlockTable 17.36.020
Window Sign (Permanent - 1 sq. ft. or less)Not listed1 sq. ft.Not listedNot listedNot listedOn or within windowNot listedUnlockTable 17.36.020
Freestanding Sign - Monument (less than 6 ft. in height)<6 ft.See Figure 17.36.020ANot listedNot listedNot listedFreestanding on propertyNot listedUnlockTable 17.36.020
Freestanding Sign - Monument (6 ft. or more in height)6 ft. or moreSee Figure 17.36.020ANot listedNot listedNot listedFreestanding on propertyNot listedUnlockTable 17.36.020

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Construction SignNot listedUp to 100 sq.ft.Not listedNot listed1 per siteOn site under constructionNot listedUnlockTable 17.36.020
Subdivision Sale SignNot listed40 sq.ft.Not listedNot listed1 per major entranceAt each major entrance to subdivisionNot listedUnlockTable 17.36.020
Sign ProgramsNot listedVariable (see program)Not listedNot listedNot listedNot listedNot listedUnlockTable 17.36.020, 17.36.050
Off-site Directional SignNot listedSee Figure 17.36.020A for size by frontageNot listedNot listedNot listedOff-site; to direct to local business onlyNot listedUnlockTable 17.36.020

PermitPal covers all 6 zoning districts in Brisbane. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Brisbane

  • No advertising sign shall be erected, installed, altered or maintained in any zoning district in the city except in conformity with the provisions of this chapter.
  • No person shall place, erect, install, alter or maintain any sign in the city without first obtaining a sign permit pursuant to this chapter unless specifically exempted.
  • All advertising signs shall be located on the same site as the use they identify or advertise, except for off-site directional signs and off-site open house signs.
  • Nonappurtenant advertising structures are prohibited in all districts.
  • All projecting signs must have a clearance of not less than eight feet or the distance required by the Uniform Sign Code, whichever is greater.
  • It is unlawful for any person who is not the owner or legal occupant of private property to place any sign on such property without authorization by the owner or legal occupant.
  • Nothing in this chapter authorizes or permits the placement of any sign on public property.
  • A nonconforming sign shall not be replaced, altered, redesigned, reconstructed or relocated unless or until the sign is made to conform with the provisions of this chapter.
  • Any sign erected, constructed, altered, enlarged or maintained in violation of this chapter is unlawful and a public nuisance.
  • No sign for which a sign permit has been issued shall be altered or changed without the prior approval of the permitting authority, except for face changes not altering the structure or characteristics.

Exempt Signs in Brisbane

  • The ordinance does not apply to any signs owned by the city, wherever located.
  • The ordinance does not apply to any signs placed on private property by the property owner or with such owner's consent, which have been expressly authorized to be located thereon by resolution of the city council.
  • Identification signs may be installed without obtaining a sign permit if they fully comply with applicable requirements.
  • Off-site open house signs may be installed without obtaining a sign permit if they fully comply with applicable requirements.
  • Residential home occupation signs may be installed without obtaining a sign permit if they fully comply with applicable requirements.
  • Sale and lease signs may be installed without obtaining a sign permit if they fully comply with applicable requirements.
  • Temporary window signs may be installed without obtaining a sign permit if they fully comply with applicable requirements.
  • Window signs less than one square foot in area may be installed without obtaining a sign permit if they fully comply with applicable requirements.

Sign Plan & Submission Notes for Brisbane

  • A sign program is required for lots with a primary frontage of more than 100 feet where signage in excess of 100 square feet is requested.
  • A sign program is required for lots with a combined primary and secondary frontage of more than 100 feet where excess secondary frontage signage is requested.
  • A sign program is required for lots with primary frontage less than 100 feet but having multiple tenants or occupants where excess signage is requested.
  • A sign program is required for lots with multiple nonresidential uses located in residential districts where signage in excess of 20 square feet is requested.
  • A sign program is required for property subject to a specific plan adopted pursuant to Sections 65450-65457 of the Government Code.
  • A sign program is required for property subject to a planned development permit issued pursuant to Chapter 17.28.
  • Sign programs are subject to review and approval by the planning commission, which may impose additional or modified requirements to achieve ordinance purposes.
  • The city may, on its own initiative by resolution of the planning commission and after a public hearing, adopt a sign program for any zoning district or geographic area to establish a consistent and uniform signage plan.

Source: municode municipal code