Sign Regulations in Fontana, California
Fontana, California has specific sign regulations covering 28 sign types across 6 zoning districts. Regulated sign types include Monument Sign, Driveway/on-site traffic directional sign, Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Fontana, California
Sample Sign Requirements in Fontana
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Monument Sign (Single-Family Residential Subdivision Development) | 5 ft (includes decorative base and cap) | 30 sf | Not listed |
| Monument Sign (Multiple-Family Uses) | 5 ft (includes decorative base and cap) | 24 sf | Not listed |
| Wall Sign (Multiple-Family Uses) | Shall not be displayed above second story and shall not extend above eave line | 16 sf | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
28
- Monument Sign
- Driveway/on-site traffic directional sign
- Awning Sign
- Canopy Sign
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Fontana
Other Cities in California
Frequently Asked Questions
In Fontana, the height limit for Pylon Sign in the Commercial Zoning Districts (C-1, C-2) and other zoning districts is 25 ft (includes decorative base and cap). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Fontana require a permit. From the submission notes on this page: Design review sign applications are required for specific sign types in compliance with Division 4. Run a code check for an exact address to see the permit requirements for that zone.
Fontana's sign code covers 28 sign types, including Monument Sign, Driveway/on-site traffic directional sign, Awning Sign, and Canopy Sign. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Traffic control and directional signs erected by government agencies, official notices required by law, signs placed by the City, and signs with an encroachment permit from the City of Fontana are exempt from the general ban on private party signs on public property. The full list is on this page.
In Fontana, Monument Sign in the Commercial Zoning Districts (C-1, C-2) and other zoning districts must be set back at least 5 ft from any property line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Fontana's sign ordinance that cover digital, changing, or flashing signs: Animated signs are prohibited. Signs containing lighting devices with intermittent, flashing, blinking, or varying intensity or light or color where the message is displayed for fewer than eight seconds before changing to another message are prohibited. A design review permanent sign approval is required to erect, move, alter, replace, suspend, display, or attach a permanent sign (general sign, freeway sign, and electronic message sign), unless exempted. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Fontana Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Fontana, California, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Fontana, California Sign Rules at a Glance
Fontana, California regulates 28 sign types across 6 zoning districts. Driveway/on-site traffic directional signs in the Residential Zoning Districts are capped at 4 ft tall and 8 sq ft. Most commercial signs in Fontana require a permit.
Detailed Sign Ordinance Requirements for Fontana, California
Sign Rules by Zoning District in Fontana (6 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential Zoning Districts | 6 | 5 ft (includes decorative base and cap) | 30 sf | Not listed |
| Commercial Zoning Districts (C-1, C-2), Mixed Use Zoning Districts (RMU), Form-Based Code Zoning Districts (FBC) | 10 | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 300 sf | Not listed |
| Industrial Zoning Districts (M-1, M-2) | 9 | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 300 sf | Not listed |
| Public and Quasi-Public Zoning Districts (P-PF, P-UC, OS-N, OS-R) | 2 | 5 ft (includes decorative base and cap) | 24 sf | Not listed |
| Downtown Boundary | 6 | Must be below eave line; clearance min 8 ft from grade | 25% of total first floor window glass area (including glass doors) | Not listed |
| General Regulations For All Zones | 3 | 10 ft | 30 sf or 10% of business frontage on which banner is placed, whichever is greater | Not listed |
Zone-by-Zone Sign Requirements in Fontana(sample of 3 of 6 zones)
Residential Zoning Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Monument Sign (Single-Family Residential Subdivision Development) | 5 ft (includes decorative base and cap) | 30 sf | Not listed | Not listed | 1 per major neighborhood entrance | Permitted only at major neighborhood entrances | Not listed | Unlock | Table 30-742.A; Sec. 30-742 |
| Monument Sign (Multiple-Family Uses) | 5 ft (includes decorative base and cap) | 24 sf | Not listed | Not listed | 1 per street frontage with entrance | Permitted only at major neighborhood entrances | Not listed | Unlock | Table 30-742.A; Sec. 30-742 |
| Wall Sign (Multiple-Family Uses) | Shall not be displayed above second story and shall not extend above eave line | 16 sf | Not listed | Not listed | 1 per street frontage | Shall not be displayed above second story and shall not extend above eave line | Not listed | Unlock | Table 30-742.A; Sec. 30-742 |
| Driveway/on-site traffic directional sign | 4 ft | 8 sf | Not listed | Not listed | 1 per driveway | Permitted only for developments with more than 12 dwelling units | Not listed | Unlock | Table 30-742.A; Sec. 30-742 |
| Yard Signs (on private property for temporary sale events) | 4 ft | 6 sf | Not listed | Not listed | 1 per street frontage of the property | On private property; 1 per street frontage | Not listed | Unlock | Table 30-721.A; Sec. 30-721(2)(a); Sec. 30-750 |
| Yard Signs (for sale/lease/rental) | 4 ft | 6 sf (on lots <2 acres); 24 sf (on lots >=2 acres) | Not listed | Not listed | 1 per street frontage | On residential property offered for sale/lease/rental | Not listed | Unlock | Table 30-721.A; Sec. 30-721(2)(b), Sec. 30-750 |
Commercial Zoning Districts (C-1, C-2), Mixed Use Zoning Districts (RMU), Form-Based Code Zoning Districts (FBC)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Awning Sign | Awning shall not extend above eave line | 25% of surface area of awning, including all valances | Not listed | Minimum 2 ft from edge of awning to curb | N/A | Limited to building frontages on ground floor | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(a) |
| Canopy Sign | 24 inches (from lowest point on sign) | 25% of surface area of canopy | Not listed | Minimum 2 ft from edge of canopy to curb | Single Tenant: 1 per building frontage; Multiple Tenant: 1 per tenant space | Limited to building frontages on ground floor | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(b) |
| Monument Sign | 6 ft (includes decorative base and cap) | 45 sf | Not listed | Minimum 5 ft from any property line; see above for other spacing | 1 for each 200 ft of street frontage | As near to middle of street frontage or at major driveway entrance | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(d) |
| Pylon Sign | 25 ft (includes decorative base and cap) | 100 sf | Not listed | Minimum 5 ft from any property line; see spacing above | Single Tenant: 1 per street frontage with min 165 ft street frontage; Multiple Tenant: 1 per street frontage. Street frontages of 300 ft or greater may have a second pylon sign. | As near to the middle of street frontage or major driveway entrance; see Additional Requirements | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(e) |
| Wall Sign (Business frontage < 100 ft) | Shall not extend above eave line | 1 sf per lineal foot (max 100 sf) | Not listed | Not listed | 1 primary wall sign per business frontage | Flat against the wall; cannot project more than 12 in. | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(f) |
| Wall Sign (Business frontage ≥ 100 ft) | Shall not extend above eave line | 1 sf per lineal foot (max 150 sf combined); secondary ≤40% of total | Not listed | Not listed | 1 primary wall sign + 2 secondary wall signs per business frontage | Flat against the wall; cannot project more than 12 in. | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(f) |
| Freeway Sign (Buildings < 250,000 sf) | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 150 sf | Not listed | Minimum 5 ft from any property line | 1 per parcel (min 800 ft freeway frontage) | For parcels with min 800 ft freeway frontage; within 400 ft of freeway right-of-way | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(c) |
| Freeway Sign (Buildings ≥ 250,000 sf) | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 300 sf | Not listed | Minimum 5 ft from any property line | 1 per parcel (min 800 ft freeway frontage) | For parcels with min 800 ft freeway frontage; within 400 ft of freeway right-of-way | Not listed | Unlock | Table 30-743.A; Sec. 30-743, 30-746(c) |
Industrial Zoning Districts (M-1, M-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Awning Sign | Awning shall not extend above eave line | 25% of surface area of the awning, including all valances | Not listed | Minimum 2 ft from edge of awning to curb | N/A | Limited to building frontages on ground floor | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(a) |
| Canopy Sign | 24 in. (from lowest point on sign) | 25% of surface area of canopy | Not listed | Minimum 2 ft from edge of canopy to curb | 1 per building frontage | Limited to building frontages on ground floor | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(b) |
| Monument Sign | 8 ft (includes decorative base and cap) | 1 sf per lineal foot (max 60 sf) | Not listed | Minimum 5 ft from any property line; see other spacing requirements above | 1 for each 200 ft of street frontage | As near to the middle of the street frontage or at major driveway entrance | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(d) |
| Pylon Sign | 25 ft (includes decorative base and cap) | 100 sf | Not listed | Minimum 5 ft from any property line; see other spacing requirements | Single Tenant: 1 per street frontage with min 165 ft street frontage; Multiple Tenant: 1 per street frontage; street frontages of 600 ft or greater may have a second pylon sign | As near to the middle of the street frontage or at major driveway entrance | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(e) |
| Wall Sign (Street Facing) | Shall not be displayed above second story and shall not extend above eave line | 2 sf per lineal foot (max 200 sf) | Not listed | Not listed | One per street frontage and/or at public entrance facing parking lot | Street facing; or at public entrance facing parking lot | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(f) |
| Wall Sign (Service and Delivery Entrances) | Shall not be displayed above second story and shall not extend above eave line | 10 sf | Not listed | Not listed | 1 per service or delivery entrance | Within 10 ft of delivery entrance | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(f) |
| Freeway Sign (Buildings < 250,000 sf) | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 150 sf | Not listed | Min 5 ft from property line | 1 per parcel (min 800 ft freeway frontage) | Min 800 ft freeway frontage; within 400 ft of freeway right-of-way | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(c) |
| Freeway Sign (Buildings ≥ 250,000 sf) | 50 ft (includes decorative base and cap; up to 75 ft w/ city flag test) | 300 sf | Not listed | Min 5 ft from property line | 1 per parcel (min 800 ft freeway frontage) | Min 800 ft freeway frontage; within 400 ft of freeway right-of-way | Not listed | Unlock | Table 30-744.A; Sec. 30-744, 30-746(c) |
PermitPal covers all 6 zoning districts in Fontana. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Fontana
- Sign types not expressly permitted are prohibited.
- Abandoned signs are prohibited.
- Animated signs are prohibited.
- Exposed raceways are prohibited.
- General advertising signs (billboards) are prohibited except as provided by Division 8.
- Illegal signs are prohibited.
- Pole signs are prohibited.
- Portable (A-frame) signs and projecting signs are prohibited except as permitted by Table No. 30-721.A within the downtown boundary.
- Roof signs are prohibited except as permitted for roof signs on mansard roofs where no other usable sign area is available.
- Vehicle signs are prohibited.
- Signs may not be placed on public property except as required or authorized by a governmental agency, and except as permitted by Division 8 and Division 9.
- Signs may not be attached to trees.
- Signs may not be placed on any private property without the permission of the property owner.
- Signs may not be located so as to interfere with building access, including ingress and egress or emergency exit routes, interfere with pedestrian movement within the public right-of-way, and/or block view of traffic control devices.
- Signs containing lighting devices with intermittent, flashing, blinking, or varying intensity or light or color where the message is displayed for fewer than eight seconds before changing to another message are prohibited.
- Signs that simulate in color or design a traffic sign or signal, or which make use of words, symbols, or characters to interfere with, mislead, or confuse pedestrian or vehicular traffic are prohibited.
- Signs which emit sound, odor, or smoke are prohibited.
- Temporary signs shall not be illuminated.
- Private parties may not display or post signs on public property or in the public right-of-way except as expressly allowed.
- Signs may not be placed in public right-of-way except as provided by Division 9.
- Any sign posted on public property or the public right-of-way in violation of the article is declared to be a trespass and a public nuisance, may be summarily removed, and responsible parties may be charged for removal costs.
- Reflective materials shall not be included on signs.
- All permanent signs must be firmly anchored and comply with all safety codes and requirements.
- Nonconforming signs shall not be changed to another nonconforming sign, altered unless to reduce/eliminate nonconformity, enlarged, or moved/replaced unless required by the City.
Exempt Signs in Fontana
- Commemorative signs installed by the City or recognized historical organizations not larger than six square feet, or signs authorized and installed by government agencies on public lands are exempt from design review sign requirements.
- Equipment signs incorporated into allowed displays, machinery, or equipment by a manufacturer, distributor, or vendor and identifying or advertising only the product or service dispensed by the machine or equipment are exempt from design review sign requirements.
- Interior graphics or signage within a structure not visible from any public right-of-way or publicly accessible area are exempt from design review sign requirements.
- Any permitted sign may substitute any commercial message or constitutionally protected noncommercial message without additional approval or permitting, as long as it complies with applicable requirements.
- Devices excluded from the definition of a 'sign' (see Section 30-783) are exempt.
- Official non-internally illuminated (unless required by law) notices, signs, or postings required or installed by government agencies for public health/safety, legal notices, traffic/parking signs, address numerals, and similar are exempt from design review sign requirements.
- Certain types of signs with limitations (see Table No. 30-721.A) are exempt from design review sign requirements if they meet specified size, height, duration, and other requirements; otherwise, design review is required.
- Traffic control and directional signs erected by government agencies, official notices required by law, signs placed by the City, and signs with an encroachment permit from the City of Fontana are exempt from the general ban on private party signs on public property.
Sign Plan & Submission Notes for Fontana
- Design review sign applications are required for specific sign types in compliance with Division 4.
- A design review permanent sign approval is required to erect, move, alter, replace, suspend, display, or attach a permanent sign (general sign, freeway sign, and electronic message sign), unless exempted.
- A design review temporary sign approval is required to erect, move, alter, replace, suspend, display, or attach a temporary sign, unless exempted.
- A design review creative sign (minor) application may be submitted for permanent signs exhibiting extraordinary aesthetic quality, creativity, or innovation in specified areas.
- A design review creative sign (PC) application may be requested for on-site permanent creative signs in specified areas and allows for greater deviation from standards when approved by the Planning Commission.
- Comprehensive sign program applications (design review sign programs) are allowed for new or existing shopping centers with a site area of six acres or more, mixed-use or commercially zoned properties, or properties with frontage on specified major streets.
- Sign programs require Planning Commission approval and must specify site plans, total sign area, individual sign areas, maximum number and height, lighting, construction materials, and sign dimensions.
- A sign variance application, including a public hearing by the Planning Commission, is required if a deviation from sign standards is requested due to unique hardship and must meet specified findings.
- A design review sign application is required subsequent to City Council approval of a general advertising sign (billboard) relocation agreement.
- Design review sign applications for signs on public property (e.g., bus shelters) must be approved before construction of general advertising signs on public property proceeds.
- An encroachment permit is required for any sign that proposes to project into the public right-of-way or onto public property.
Source: municode municipal code