Sign Regulations in Pico Rivera, California

Pico Rivera, California has specific sign regulations covering 17 sign types across 10 zoning districts. Regulated sign types include Nameplate, Real Estate Sign, Subdivision Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 10, 2025

Sign Regulation Overview for Pico Rivera, California

Sample Sign Requirements in Pico Rivera

Sign TypeMax HeightMax AreaSetback
Nameplate42 inches1 sq. ft.
Real Estate Sign6 feet9 sq. ft.
Subdivision Sign12 feet150 sq. ft.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Pico RiveraFull Coverage

Sign Types Covered

17

  • Nameplate
  • Real Estate Sign
  • Subdivision Sign
  • Construction Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Pico Rivera

Frequently Asked Questions

Sign height limits in Pico Rivera vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Pico Rivera, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Pico Rivera, regulated sign types include Nameplate, Real Estate Sign, Subdivision Sign, Construction Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Pico Rivera vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Pico Rivera are regulated with specific requirements for brightness, animation, and message duration. Pico Rivera has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Pico Rivera Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Pico Rivera, California sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Pico Rivera, California Sign Rules at a Glance

Pico Rivera, California regulates 17 sign types across 10 zoning districts. Digital Billboards in the I-L, I-G, and IPD Zones zoning district are capped at 75 feet tall and Maximum of 1,200 total sq. ft. per sign face, with a Minimum clearance of thirty feet between the lowest point of the sign and the finished driveway grade. setback (Sec. Table 18.46.050, Note 47). Most commercial signs in Pico Rivera require a permit.

Detailed Sign Ordinance Requirements for Pico Rivera, California

Sign Rules by Zoning District in Pico Rivera (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
O-S, Public Facilities and P Zones1
CPD Zone1
IPD Zone1
R-E, S-F, R-I, and PUD Zones642 inches150 sq. ft.
R-M Zone642 inches150 sq. ft.
P-A Zone942 inches150 sq. ft.
C-N Zone742 inches150 sq. ft.
C-C, C-G and C-M Zones1142 inches200 sq. ft.
I-L, I-G, and IPD Zones1175 feetMaximum of 1,200 total sq. ft. per sign face
General Regulations For All Zones1

Zone-by-Zone Sign Requirements in Pico Rivera(sample of 3 of 10 zones)

P-A Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate2 sq. ft.1 per businessAbove entrance doorwayUnlockTable 18.46.050
Real Estate Sign6 feet24 sq. ft.2 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Subdivision Sign12 feet150 sq. ft.2 per tractWithin the boundaries of the recorded tract mapUnlockTable 18.46.050, Note 17
Construction Sign6 feet30 sq. ft.1 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Directional Sign42 inches6 sq. ft.1Next to each driveway entrance or exit from off-street parking facilitiesUnlockTable 18.46.050
Building Identification Sign - Wall-Mounted75 sq. ft.1 per businessExterior building wall fronting a public streetUnlockTable 18.46.050, Note 15
Freestanding Identification Sign20 feet150 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 23
Freestanding Complex Sign20 feet150 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 25

C-C, C-G and C-M Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate10 sq. ft.1 per businessStore front window and front and/or rear doorsUnlockTable 18.46.050, Note 28
Real Estate Sign6 feet36 sq. ft.2 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Subdivision Sign12 feet150 sq. ft.2 per tractWithin the boundaries of the recorded tract mapUnlockTable 18.46.050, Note 17
Construction Sign6 feet49 sq. ft.1 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Directional Sign42 inches6 sq. ft.1Next to each driveway entrance or exit from off-street parking facilitiesUnlockTable 18.46.050
Pedestrian-Oriented Sign4 sq. ft. (sign copy area 3 sq. ft. maximum)1 per public entrance of businessWithin 5 feet horizontal of public entrance sign is intended to serveUnlockTable 18.46.050, Note 43
Freestanding Identification Sign25 feet175 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 23
Freestanding Complex Sign25 feet200 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 25

I-L, I-G, and IPD Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate2 sq. ft.1 per businessAbove entrance doorwayUnlockTable 18.46.050
Real Estate Sign6 feet54 sq. ft.2 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Subdivision Sign12 feet150 sq. ft.2 per tractWithin the boundaries of the recorded tract mapUnlockTable 18.46.050, Note 17
Construction Sign6 feet54 sq. ft.1 per lotOn the same lot with the building it servesUnlockTable 18.46.050
Directional Sign42 inches6 sq. ft.1Next to each driveway entrance or exit from off-street parking facilitiesUnlockTable 18.46.050
Freestanding Identification Sign25 feet250 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 23
Freestanding Complex Sign25 feet250 sq. ft.1 per lotOn same lot with business it is intended to serveUnlockTable 18.46.050, Note 25
Digital Billboard75 feetMaximum of 1,200 total sq. ft. per sign faceMinimum clearance of thirty feet between the lowest point of the sign and the finished driveway grade.1 digital billboard structure consisting of up to 2 facesIn any area within 60 feet of the 605 Freeway rights-of-way boundaryUnlockTable 18.46.050, Note 47

PermitPal covers all 10 zoning districts in Pico Rivera — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 10 zones for Pico Rivera — start free

Prohibited Signs in Pico Rivera

  • No signs and/or other advertising shall be designed to flash and/or blink on and off, or be designed to rotate or revolve in such a manner so as to create the illusion of flashing or blinking on and off.
  • Animated signs are prohibited.
  • No signs and/or other advertising shall be installed, placed, erected, constructed, painted, attached to or project above the roof of any building, or be located in any portion of the public rights-of-way.
  • Rotating or revolving signs, all roof-mounted signs, any type of balloon signs, air dancers, and any blow-up advertising are prohibited.
  • No person shall exhibit, post or display upon any sign or billboard any statement, words, picture, illustration or signs of any obscene, indecent or immoral nature.
  • No person shall erect, move, alter, change, repair, place, suspend, attach or maintain, or cause or permit to be erected, moved, altered, changed, repaired, placed, suspended, attached or maintained, any sign, street clock, street bulletin or street banner on, over or above any public street or sidewalk without first obtaining a permit from the director of public works to do so.
  • No person, except a public officer or employee in the performance of a public duty, or a private person in giving a legal notice, shall paste, post, paint, print, nail or tack, or otherwise fasten any card, banner, handbill, sign, poster, advertisement or notice of any kind upon any property without the consent of the owner, holder, lessee, agent or trustee thereof.

Exempt Signs in Pico Rivera

  • Nameplates permitted in the R-E, S-F, PUD and R-M zones, real estate signs, and construction signs are exempt from needing review, approval and/or conditional approval by the zoning administrator or other pertinent reviewing body.

Sign Plan & Submission Notes for Pico Rivera

  • New developments and existing developments conducting site renovations, with more than three nonresidential tenants require submittal of a master sign program establishing criteria of uniform letter style, color, dimensions, area and placement.
  • Centers with more than three nonresidential tenants must first obtain approval of a master sign program.
  • Stand-alone businesses or centers with two or more nonresidential tenants may install one parallel-projecting sign and one wall-mounted sign on the same building façade(s) only when such stipulations are included within the approval of a master sign program.

Source: municode municipal code