Sign Regulations in West Hollywood, California
West Hollywood, California has specific sign regulations covering 18 sign types across 5 zoning districts. Regulated sign types include Wall or Elevated Monument Sign, Wall and/or Window, Awning/Canopy Blade/Bracket, Free-standing Bracket or Monument, Wall and/or Window, Blade/Bracket, Free-standing Bracket or Monument. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 10, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for West Hollywood, California
Sample Sign Requirements in West Hollywood
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall or Monument Sign | Below edge of roof; 42 in. monument | 25 sq. ft. maximum per sign | Not listed |
| Wall or Elevated Monument Sign | Below edge of roof; 36 in. freestanding | 4 sq. ft. | Not listed |
| Wall or Elevated Monument Sign; Changeable Copy Sign | Below edge of roof; 36 in. freestanding | 4 sq. ft. maximum per sign | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Wall or Elevated Monument Sign
- Wall and/or Window, Awning/Canopy Blade/Bracket, Free-standing Bracket or Monument
- Wall and/or Window, Blade/Bracket, Free-standing Bracket or Monument
- Wall and/or Window, Awning/Canopy, Blade/Bracket
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for West Hollywood
Other Cities in California
Frequently Asked Questions
In West Hollywood, the height limit for Wall and/or Window, Blade/Bracket, Free-standing Bracket or Monument in the Residential Zoning Districts (R1, R2, R3, R4) is 10 feet above grade. 6 ft. for freestanding signs. The height limit for Wall and/or Window, Awning/Canopy, Blade/Bracket in the Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) is 8 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in West Hollywood require a permit. We haven't published West Hollywood's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
West Hollywood's sign code covers 18 sign types, including Wall or Elevated Monument Sign, Wall and/or Window, Awning/Canopy Blade/Bracket, Free-standing Bracket or Monument, Wall and/or Window, Blade/Bracket, Free-standing Bracket or Monument, and Wall and/or Window, Awning/Canopy, Blade/Bracket. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Any sign erected by the city. The full list is on this page.
We haven't published West Hollywood's sign setback rules on this page yet. Run a code check for an exact address to see them.
West Hollywood's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research West Hollywood Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in West Hollywood, California, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
West Hollywood, California Sign Rules at a Glance
West Hollywood, California regulates 18 sign types across 5 zoning districts. Walls in the Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) are capped at 6 ft tall and 8 sq ft. Most commercial signs in West Hollywood require a permit.
Detailed Sign Ordinance Requirements for West Hollywood, California
Sign Rules by Zoning District in West Hollywood (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential Zoning Districts (R1, R2, R3, R4) | 8 | Below edge of roof; 42 in. monument | 25 sq. ft. maximum per sign | Not listed |
| Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) | 12 | 48 in. | 50 sq. ft. total, but shall not exceed 25% of any window area if located in window. | Not listed |
| Sunset Specific Planning Zone | 1 | Not listed | Not listed | Not listed |
| CR zone | 1 | Not listed | No larger than 500 square feet in size | Not listed |
| General Regulations For All Zones | 2 | The lowest point of a blade or bracket signs shall be at least eight feet above finished grade. | Not listed | Not listed |
Zone-by-Zone Sign Requirements in West Hollywood(sample of 3 of 5 zones)
Residential Zoning Districts (R1, R2, R3, R4)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall or Monument Sign | Below edge of roof; 42 in. monument | 25 sq. ft. maximum per sign | Not listed | Not listed | 1 for each street frontage | Affixed to wall, or placed within a landscaped area near building entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall or Elevated Monument Sign | Below edge of roof; 36 in. freestanding | 4 sq. ft. | Not listed | Not listed | 1 for each street frontage | Affixed to wall, or placed within a landscaped area near building entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall or Elevated Monument Sign | Below edge of roof; 36 in. freestanding | 1 sq. ft. for each lineal ft. of building frontage; 25 sq. ft. maximum | Not listed | Not listed | 1 for each tenant space | Affixed to wall, or placed within a landscaped area near tenant entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall or Elevated Monument Sign | Below edge of roof; 36 in. freestanding | 1 sq. ft. | Not listed | Not listed | 1 for each tenant space | Affixed to wall, or placed within a landscaped area near building entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall or Elevated Monument Sign; Changeable Copy Sign | Below edge of roof; 36 in. freestanding | 4 sq. ft. maximum per sign | Not listed | Not listed | 1 for each street frontage | Affixed to wall, or placed within a landscaped area near building entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall or Free-standing Bracket Sign; Changeable Copy Sign | Below edge of roof; 36 in. freestanding | Identification sign: 0.5 sq. ft. for each linear ft. of primary building frontage, 25 sq. ft. maximum per sign. Changeable copy sign: 15 sq. ft. maximum. | Not listed | Not listed | 2 identification signs per use, 1 changeable copy sign per façade | Affixed to wall, or placed within a landscaped area near building entrance | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall and/or Window, Awning/Canopy Blade/Bracket, Free-standing Bracket or Monument | Below edge of roof; 36 in. freestanding | 1 sq. ft. for each lineal ft. of tenant frontage; 25 sq. ft. maximum | Not listed | Not listed | 2 for each tenant space | Affixed to wall, or placed within a landscaped area near tenant entrance. Allowed only on ground floor frontage. | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
| Wall and/or Window, Blade/Bracket, Free-standing Bracket or Monument | 10 feet above grade. 6 ft. for freestanding signs | 3 square feet | Not listed | Not listed | 1 per street frontage | Near vehicular and/or pedestrian access to the building | Not listed | Unlock | Table 3-11, Sign Standards for Residential Zoning Districts (R1, R2, R3, R4) |
Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall and/or Window, Awning/Canopy Blade/Bracket, Free-standing Bracket or Monument | Below edge of roof. 6 ft. for free-standing signs. | 1 sq. ft. for each linear ft. of primary business frontage. Corner parcels: 1 additional sq. ft. for each linear ft. of side street frontage, 25 sq. ft. maximum for signs on side elevation. | Not listed | Not listed | 3 per primary business frontage.1 per side street frontage | Near main entrance. Shall not cover doors, windows, or architectural details. | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall and/or Window, Awning/Canopy, Blade/Bracket | 8 ft. | 4 sq. ft. | Not listed | Not listed | 1 per secondary business frontage | Near secondary entrance | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall and/or Window, Awning/Canopy, Blade/Bracket | Below edge of roof. 6 ft. for freestanding signs. | 1 sq. ft. for each linear ft. of primary business frontage. | Not listed | Not listed | 1 per tenant space | Near main entrance | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall or Monument | Below edge of roof. 6 ft. for monument. | 1 sq. ft. for each linear ft. of building façade. 25 sq. ft. maximum per sign. | Not listed | Not listed | 1 sign for each street frontage | Near main entrance to building or project | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall | 6 ft. | 8 sq. ft. | Not listed | Not listed | 1 per building entrance | Near main entrances | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall or Canopy | Below edge of roof | 10 sq. ft. per sign | Not listed | Not listed | 1 per building frontage and 1 per canopy facing a street. 2 signs maximum per street frontage. | On building façade or canopy | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Monument | 48 in. | 30 sq. ft. per face. 2 faces maximum . | Not listed | Not listed | 1 per use | Shall not create hazard at driveways or corners. | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
| Wall | Below edge of roof unless on architectural element that extends above roof edge. See additional requirements. | 2 sq. ft. of sign area per linear ft. of building frontage. 200 sq. ft. maximum total sign area. | Not listed | Not listed | 1 per street frontage | None | Not listed | Unlock | Table 3-12, Sign Standards for Non-Residential Zoning Districts (CN1, CN2, CC1, CC2, CA, CR, SSP, PF) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Blade or Bracket Sign | The lowest point of a blade or bracket signs shall be at least eight feet above finished grade. | Not listed | Not listed | Not listed | Not listed | Placed only on a ground floor façade, near the main entrance of the business, except for businesses located above the ground level with direct exterior pedestrian access. | Not listed | Unlock | § 19.34.050(B), Blade/Bracket Signs |
| Wall Sign | Shall not project above the edge of the roof of a structure | Not listed | Not listed | Not listed | Not listed | Shall not be placed to obstruct any portion of a window, doorway, transom, or other architectural detail. | Not listed | Unlock | § 19.34.050(H), Wall Signs |
PermitPal covers all 5 zoning districts in West Hollywood. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in West Hollywood
- No sign shall encroach into a public right-of-way, except that a blade or bracket sign or awning attached to a building façade may project a maximum of three feet over a public sidewalk, if the lowest part of the sign is at least eight feet above the sidewalk surface, with the approval of the City Engineer.
- Signs shall not have blinking, flashing, or fluttering lights, or other illuminating devices that have a changing light intensity, brightness, or color, except for large screen video signs approved in compliance with Section 19.34.080(H), and creative signs approved in compliance with Section 19.34.060.
- Signs shall not use colored lights or other design elements that may be confused with or mistaken for traffic-control devices.
- Reflective type bulbs and incandescent lamps that exceed 15 watts shall not be used on the exterior surface of signs so that the face of the bulb or lamp is visible from a public right-of-way or adjacent property.
- Permanent signs that advertise continuous sales or special prices shall not be allowed.
- Signs erected in a manner that a portion of their surface or supports will interfere with the free use of a fire escape, exit or standpipe, or obstruct a required ventilator, door, stairway, or window above the first story, or create other hazards.
- Signs using words, colors, symbols, or characters in a manner that interferes with, misleads, or confuses pedestrian or vehicular traffic and safety.
- Vehicle signs attached to or painted on motor vehicles that are parked on or adjacent to property for more than 24 consecutive hours, the principal purpose of which is to attract attention to a product sold or business located on the property.
- Inflated signs, balloons, and figures.
- Mobile billboards.
Exempt Signs in West Hollywood
- On-site business identification signs and on-site business window signs or interior advertising displays on or inside any premises where tobacco products are legally sold.
- Signs or advertising displays on commercial vehicles used for transporting tobacco products.
- Signs or advertising displays on any public bus or taxicab.
- Signs or advertising displays which educate the public about tobacco products and do not propose a commercial transaction.
- Advertising display or promotion that is worn as clothing by an individual.
- Flags of the United States of America and other nations, states, counties, or municipalities, and flags of incorporated nonprofit organizations or service clubs.
- Official and legal notices required by a court or governmental agency.
- Any sign erected by the city.
- A sign erected by a federal or state agency to the extent that the city is precluded from regulation by the doctrine of preemption.
- A sign on a historic structure or the adjacent right-of-way in compliance with a city program.
- Off-site signs that are part of and accessory to bus shelters, transit shelters, pay phones, trash receptacles, and other similar street furniture located in the public right-of-way and installed by the city or in compliance with an agreement with the city.
Sign Plan & Submission Notes for West Hollywood
- A comprehensive sign program shall be required whenever two or more separate tenant spaces are to be created on the same parcel.
- A comprehensive sign program shall be required for a new project with five or more non-exempt signs.
- A comprehensive sign program shall be required when two or more new signs are proposed during any 12-month period at an existing business with five or more non-exempt signs.
- The Community Development Director may determine that a comprehensive sign program is needed because of special project characteristics.
Source: municode municipal code