Sign Regulations in Flagler Beach, Florida
Flagler Beach, Florida has specific sign regulations covering 19 sign types across 5 zoning districts. Regulated sign types include Freestanding Sign, Wall Sign, Roof Sign (Recreation Zoning District east of SR A1A right-of-way). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: February 18, 2026
Sign Regulation Overview for Flagler Beach, Florida
Sample Sign Requirements in Flagler Beach
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | 6 ft | 32 sq ft for non-residential; 4 sq ft for single-family residential; 32 sq ft for multi-family residential; 64 sq ft at the entrance of a PUD/subdivision/mobile home park | Shall not be located within side or rear lot line required setback, and closer than 5 feet to street right-of-way, unless otherwise stated (see Sec. 7.06.04) |
| Wall Sign | 6 ft (if detached; wall sign cannot extend above wall) | 30 sq ft for multi-family residential and non-residential uses; 4 sq ft single-family residential | — |
| Roof Sign (Recreation Zoning District east of SR A1A right-of-way) | Shall not protrude above the top of the roof | 75% of roof area | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
19
- Freestanding Sign
- Wall Sign
- Roof Sign (Recreation Zoning District east of SR A1A right-of-way)
- Marquee Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Flagler Beach
Other Cities in Florida
Frequently Asked Questions
In Flagler Beach, wall signs can be up to 6 ft (if detached; wall sign cannot extend above wall) and monument signs are limited to 6 ft. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.
To get a sign permit in Flagler Beach, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Flagler Beach, regulated sign types include Freestanding Sign, Wall Sign, Roof Sign (Recreation Zoning District east of SR A1A right-of-way), Marquee Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
In Flagler Beach, monument signs typically require a Shall not be located within side or rear lot line required setback, and closer than 5 feet to street right-of-way, unless otherwise stated (see Sec. 7.06.04) setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.
Digital and LED signs in Flagler Beach are regulated with specific requirements for brightness, animation, and message duration. Flagler Beach has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Flagler Beach Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Flagler Beach, Florida sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds