Questions? Call us at (262) 218-2915

Sign Regulations in Port Richey, Florida

Port Richey, Florida has specific sign regulations covering 9 sign types across 3 zoning districts. Regulated sign types include Subdivision Sign, Identification Sign, Directional Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: March 17, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Port Richey, Florida

Sample Sign Requirements in Port Richey

Sign TypeMax HeightMax AreaSetback
Subdivision Sign10 feet40 square feet5 feet from the right-of-way line
Identification Sign10 feet32 square feet5 feet from the right-of-way line
Directional Sign5 feet32 square feetNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Port RicheyPartial Coverage

Sign Types Covered

9

  • Subdivision Sign
  • Identification Sign
  • Directional Sign
  • Ground Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions
  • Illumination rules

Official Resources for Port Richey

City WebsiteMunicipal Code4 permit application links available

Port Richey, Florida Sign Rules at a Glance

Port Richey, Florida regulates 9 sign types across 3 zoning districts. Ground Signs in the Nonresidential District are capped at 11 feet tall and 210 square feet, set back 5 feet from the right-of-way line (Sec. 121-9(c)(1)).

Detailed Sign Ordinance Requirements for Port Richey, Florida

Sign Rules by Zoning District in Port Richey (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
Residential District310 feet40 square feet
Nonresidential District418 feet above grade210 square feet
General Regulations For All Zones26 feet (Residential) / 10 feet (Nonresidential)8 square feet (Residential) / 32 square feet (Nonresidential)

Zone-by-Zone Sign Requirements in Port Richey

Residential District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Subdivision Sign10 feet40 square feet5 feet from the right-of-way lineOne double-faced or two single-faced signs per entranceAt each entrance to a platted subdivisionUnlockSec. 121-9(b)(1)
Identification Sign10 feet32 square feet5 feet from the right-of-way lineOne wall sign or one double-faced or two single-faced ground signs per entranceAt each entrance to a multiple-family residential development or mobile home parkUnlockSec. 121-9(b)(2)
Directional Sign5 feet32 square feetNot listedOne per subdivision entrancePer subdivision entranceUnlockSec. 121-9(b)(3)

Nonresidential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign11 feet210 square feetNot listed5 feet from the right-of-way lineOne per parcel with frontage on a public streetOn parcels with public street frontageUnlockSec. 121-9(c)(1)
Wall SignNot listed150 square feetNot listedNot listedOne per establishment in a multiple-occupancy parcelFacing a public streetUnlockSec. 121-9(c)(2)
Projecting Sign18 feet above gradeNot listedNot listed10 feet from an interior lot line or adjacent establishmentOne per establishmentAttached to building wallUnlockSec. 121-9(c)(3)
Sandwich Sign3½ feetNot listed2 feetNot listedOne per business establishmentSidewalk, no further than 5 feet from the main entranceUnlockSec. 121-4(17)

General Regulations For All Zones

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign6 feet (Residential) / 10 feet (Nonresidential)8 square feet (Residential) / 32 square feet (Nonresidential)Behind the right-of-way lineTwo per frontageBehind the right-of-way lineUnlockSec. 121-10(1)
Political Campaign SignNot listed8 square feetNot listedTwo per candidate or issueResidential or nonresidential parcelUnlockSec. 121-4(16)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Port Richey with a free PermitPal account.

Run a free code check

Prohibited Signs in Port Richey

  • Any sign not specifically permitted, exempted, or authorized by this chapter is prohibited.
  • Activated signs and devices.
  • Revolving signs.
  • Snipe signs.
  • Signs other than sandwich signs placed on the sidewalk or curb.
  • Swinging signs.
  • Vehicle signs.
  • Any sign which has unshielded, illuminated devices that produce glare or are a hazard or nuisance to motorists or occupants of adjacent properties.
  • Any sign which causes radio, television, or other communication interference.
  • Any sign which obstructs any firefighting equipment, window, door, or opening used as a means of ingress or egress for fire escape purposes.
  • Any sign which projects in excess of 18 inches over a dedicated public street, alley, sidewalk, or private or public roadway.
  • Any sign erected on public property or a public right-of-way, except government signs or other signs as expressly allowed.
  • Bench signs located on private property.
  • Abandoned signs.
  • Inflatable signs or devices.
  • Illegal signs.
  • Beacon lights.
  • Roof signs.
  • Back-to-back signs with faces at an angle that exceeds 45 degrees.
  • Window signs which, in aggregate, cover more than 25 percent of the total window surface.
  • Signs in or upon any river, bay, lake, or other body of water within the limits of the city.
  • Signs attached to or painted on piers or seawalls, other than official regulatory or warning signs.
  • Pole signs.
  • Multiprism signs.
  • Portable signs.
  • Pennants.
  • Festoons.
  • Banner signs and advertising balloons which do not comply with section 121-10(4).
  • Sandwich signs that do not meet the requirements of section 121-4(17).
  • Neither the city council nor any board may grant a variance allowing the erection of any of the prohibited signs expressly enumerated in this section.

Exempt Signs in Port Richey

  • The advertising copy, message, or sign face on changeable copy signs.
  • Government signs.
  • Flags, emblems, or insignia of any nation, state, or political subdivision, religious, charitable, political, social, or fraternal organization when displayed on a single pole or other supporting structure.
  • Holiday, seasonal, or commemorative decorations; provided that such signs are not displayed for a period of more than 60 days.
  • Memorial signs or tablets, names of buildings, and date of erection when cut into any masonry surface or when constructed of bronze or other noncombustible materials.
  • In nonresidential districts, two directional signs per driveway, provided such signs shall be located on and pertaining to that parcel of private property.
  • In residential districts, one nonilluminated identification sign used to identify the address and occupant of the residence, not to exceed two square feet in sign surface area.
  • One nonilluminated real estate sign may be displayed per street frontage.
  • Window signs which comprise, in aggregate, 25 percent of the total window area or less.
  • Signs incorporated on machinery or equipment at the manufacturer's or distributor's level which identify or advertise only the product or service dispensed by the machine or equipment.
  • Interior signs which are displayed on the inside of a building and not visible from a public place.
  • "No Trespassing" or "No Dumping" signs, not exceeding one sign every 500 feet along boundaries of and at each corner of the posted property.
  • Noncommercial, on-site signs not included in this section which are less than four square feet in sign surface area and 30 inches in height.
  • Directional signs related to construction located within the development where building or development permit approvals have been issued by the city.
  • One construction sign per street frontage.
  • Two nonilluminated political campaign signs per candidate or issue for each residential or nonresidential parcel.
  • In nonresidential zoning districts, one sandwich sign per business establishment having a certificate of occupancy placed on the sidewalk no further than five feet from the main entrance door of the structure of the establishment.

Sign Plan & Submission Notes for Port Richey

  • This chapter is intended to establish a coordinated graphic program that provides for occupant identification and directional communication, while allowing the creation of unique and informative signs.
  • Before any sign permit is issued, a written application, in the form provided by the building and zoning official or his designee shall be filed, together with such drawings and specifications as may be necessary to fully advise the building and zoning official of the location, construction, materials, manner of illuminating, method of securing or fastening, the number of signs applied for, the consent of the property owner, and the wording of the sign.

Source: municode municipal code

Frequently Asked Questions

In Port Richey, the height limit for Ground Sign in the Nonresidential District is 11 feet (Sec. 121-9(c)(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Port Richey's sign code covers 9 sign types, including Subdivision Sign, Identification Sign, Directional Sign, and Ground Sign. The ordinance lists 17 exemptions. One of them: Directional signs related to construction located within the development where building or development permit approvals have been issued by the city. The full list is on this page.

In Port Richey, Ground Sign in the Nonresidential District must be set back 5 feet from the right-of-way line (Sec. 121-9(c)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

AI-Powered Research

Ready to Research Port Richey Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Port Richey, Florida, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds