Sign Regulations in Sebring, Florida
Sebring, Florida has specific sign regulations covering 18 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign (Ground/Monument/Wide-base), Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Sebring, Florida
Sample Sign Requirements in Sebring
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Temporary Sign | 6 feet in residential districts; 8 feet in nonresidential districts | 32 square feet aggregate per parcel; 64 sq ft aggregate for parcels > 1 acre/multiple tenants | Min 5 ft from property line; not in clear visibility triangle (except historic district) |
| Freestanding Sign (Ground/Monument/Wide-base) | 6 feet | 32 square feet for sign face; up to 50 sq ft including mounting/support structures | As general regulation (see Sec. 17-6.3) |
| Wall Sign | Not to exceed maximum district height; can increase to 96 sq ft if >50 units AND setback at least 200 ft | 32 square feet | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Wall Sign
- Freestanding Sign (Ground/Monument/Wide-base)
- Projecting Sign
- Bench Sign
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Sebring
Other Cities in Florida
Frequently Asked Questions
In Sebring, the height limit for Freestanding Sign (Ground/Monument/Wide-base) in the Residential zoned districts, Residential districts, RP zoning district is 6 feet (Sec. 17-10.1(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Sebring require a permit. From the submission notes on this page: A plan, sketch, blueprint, or similar presentation drawn to scale is required as part of the sign permit application, showing the sign, all structural details, location in relation to setbacks, streets, existing signs and buildings, wind pressure requirements, and materials. Run a code check for an exact address to see the permit requirements for that zone.
Sebring's sign code covers 18 sign types, including Wall Sign, Freestanding Sign (Ground/Monument/Wide-base), Projecting Sign, and Bench Sign. Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: Signs carried by a person. The full list is on this page.
In Sebring, Temporary Sign must be set back at least 5 ft from property line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Sebring's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Sebring Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Sebring, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Sebring, Florida Sign Rules at a Glance
Sebring, Florida regulates 18 sign types across 7 zoning districts. Projecting Signs in the Nonresidential zoned districts and other zoning districts are capped at 15 sq ft (Sec. 17-10.2(e)). Most commercial signs in Sebring require a permit.
Detailed Sign Ordinance Requirements for Sebring, Florida
Sign Rules by Zoning District in Sebring (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 1 | 6 feet in residential districts; 8 feet in nonresidential districts | 32 square feet aggregate per parcel; 64 sq ft aggregate for parcels > 1 acre/multiple tenants | Not listed |
| Residential zoned districts, Residential districts, RP zoning district | 2 | Not to exceed maximum district height; can increase to 96 sq ft if >50 units AND setback at least 200 ft | 32 square feet for sign face; up to 50 sq ft including mounting/support structures | Not listed |
| Nonresidential zoned districts, Nonresidential districts, Commercial zoning districts, Commercial and industrial zoning districts, Industrial zoned districts, Public zoning district | 8 | Not to project more than 25 ft above crown of road or ground, whichever higher | Max 300 sq ft per sign (public: max 32 sq ft per entrance when abutting commercial/public) | Not listed |
| Mixed-use developments | 2 | 6 feet | 32 sq ft for face, 50 sq ft including mounting/support | Not listed |
| CRA district (Community Redevelopment Agency District), Historic district, Locally designated historic properties | 9 | 48 inches | 300 sq ft | Not listed |
| Design review area | 1 | Not listed | Not listed | Not listed |
| R-3P zoning district | 2 | 6 feet | 32 sq ft for face, 50 sq ft including mounting/support | Not listed |
Zone-by-Zone Sign Requirements in Sebring(sample of 3 of 7 zones)
Residential zoned districts, Residential districts, RP zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (Ground/Monument/Wide-base) | 6 feet | 32 square feet for sign face; up to 50 sq ft including mounting/support structures | Not listed | As general regulation (see Sec. 17-6.3) | 1 per main entrance | One per main entrance on a public right-of-way | Not listed | Unlock | Sec. 17-10.1(1) |
| Wall Sign | Not to exceed maximum district height; can increase to 96 sq ft if >50 units AND setback at least 200 ft | 32 square feet | Not listed | Not listed | Not listed | On building wall | Not listed | Unlock | Sec. 17-10.1(2) |
Nonresidential zoned districts, Nonresidential districts, Commercial zoning districts, Commercial and industrial zoning districts, Industrial zoned districts, Public zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | Not to project more than 25 ft above crown of road or ground, whichever higher | Max 300 sq ft per sign (public: max 32 sq ft per entrance when abutting commercial/public) | Not listed | See Sec. 17-6.3; general: min 8 ft from powerline, outside clear visibility triangle | 1 per road frontage (or 2 at intersection, if each oriented to different street) | On-premises, per road frontage; public zone abutting commercial/public only | Not listed | Unlock | Sec. 17-10.2(a) |
| Wall/Fascia Sign (Single Use) | Not above roofline or exterior wall | 300 sq ft per business (total) | Not listed | Not listed | 1 per business per public street frontage | On wall/fascia; visible and readable from street | Not listed | Unlock | Sec. 17-10.2(b)(1) |
| Wall/Fascia Sign (Shopping Centers/Multi-Use >2 acres) | Not listed | Not listed | Not listed | Not listed | 1 per business | On wall/fascia facing street; each tenant | Not listed | Unlock | Sec. 17-10.2(b)(2) |
| Wall Sign (Rear Wall) | Not listed | 32 sq ft per rear wall | Not listed | Not listed | 1 per rear wall abutting street/alley | On rear wall abutting street/alley | Not listed | Unlock | Sec. 17-10.2(b)(3) |
| Under Canopy/Awning Sign | Minimum clearance 8 ft (7 ft if pliable material) | 6 sq ft | Not listed | Not listed | 1 per tenant | Under canopy/awning attached to building | Not listed | Unlock | Sec. 17-10.2(d) |
| Projecting Sign | Not above roof line; minimum 8 ft clearance from sidewalk | 15 sq ft | Project max 5 ft from building | Not listed | 1 per frontage for each business | 90-degree from building facade | Not listed | Unlock | Sec. 17-10.2(e) |
| Roof Sign | Not listed | Not listed | Not listed | Not listed | Not listed | On roof | Not listed | Unlock | Sec. 17-10.2(f) |
| Bench Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Commercial and industrial zones only; not on ROW or public property (except 17-8(b)(4)); see also CRA/Historic for exceptions | Not listed | Unlock | Sec. 17-11.2 |
CRA district (Community Redevelopment Agency District), Historic district, Locally designated historic properties
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 18 ft; min 8 ft clearance from ground to bottom of sign | 300 sq ft | Not listed | Not listed | Not listed | Preferably near entrances to parking or to identify a building | Not listed | Unlock | Sec. 17-14.2(a), 17-14.2(f) |
| Pole Sign | 18 ft; min 8 ft clearance from ground to bottom of sign | 300 sq ft | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Sec. 17-14.2(a), (f) |
| Wall Sign | No higher than facade; must be within architectural bands | No explicit area limit but vertical dimension no more than 2'6" | May extend full facade width | Not listed | Not listed | Parallel to building; affixed to building; not to obscure features | Not listed | Unlock | Sec. 17-14.2(c), (e), (f), 17-14.4(1)(a)-(e) |
| Projecting Sign | Mounted no lower than 8 ft above first floor elevation, no higher than second floor elevation | Not listed | Projects max 4 ft from building | Not listed | Not listed | Perpendicular to building, two faces; min 15 ft separation between projecting signs | Not listed | Unlock | Sec. 17-14.2(c)(5)-(7), 17-14.4(1)(f) |
| Window Sign | Not listed | 50% of any or all window surface area | Not listed | Not listed | Not listed | On or behind window | Not listed | Unlock | Sec. 17-14.2(d) |
| Under Canopy Sign | Not listed | 6 sq ft per store front | Not listed | Not listed | 1 per store front | Under canopy/marquee | Not listed | Unlock | Sec. 17-14.4(1)(g) |
| Sidewalk Sign | 48 inches | 36 inches wide by 48 inches high | 36 inches | Not listed | 1 per establishment per frontage | On sidewalk in front of business | Not listed | Unlock | Sec. 17-14.2(g), 17-7.2(2) |
| Display Board | Not listed | 4 sq ft per sign face | Not listed | Not listed | 1 per establishment | On exterior wall of building | Not listed | Unlock | Sec. 17-14.4(1)(h) |
PermitPal covers all 7 zoning districts in Sebring. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Sebring
- Any sign not specifically permitted by these sign regulations is prohibited.
- Any sign which constitutes a traffic hazard or a detriment to traffic safety as determined by the city administrator or chief of police due to size, location, movement, coloring, or intensity of illumination.
- Any sign which obstructs vision between pedestrians and vehicles using the public right-of-way, including, but not restricted to, those not meeting the city's clear visibility standard requirements.
- Snipe signs are prohibited.
- Vehicular signs are prohibited.
- No sign shall be placed on or over the public right-of-way or on any public property except that placed by, or approved by, the appropriate government entity.
- Signs that interfere with any fire escape, emergency exit, standpipe, or any window to the extent that light or ventilation is reduced below code requirements.
- Signs that emit audible sound, odor, or visible matter such as smoke or steam.
- Signs containing any statement, word, character or illustration of an obscene, indecent or immoral nature that are not protected by the First Amendment of the United States and the Florida Constitution.
- Signs that imitate or are made to resemble official traffic or government signs, symbols, and signals.
- Parasite signs are prohibited.
Exempt Signs in Sebring
- One tablet sign per building, not exceeding three square feet, when cut into masonry or constructed of bronze or other durable material and attached to the building, not mounted higher than six feet from the ground.
- Signs inside a building, which are not window signs.
- Window signs, except as provided for the CRA and Historic Districts.
- Regulatory signs and any notice or warning signs required by local, state, or federal government law, ordinance, regulation or resolution.
- Flags where the aggregate sign area of such flags does not count as chargeable square footage, provided that no more than four flags are displayed per parcel and each flag is flown from a flagpole.
- Permanent signs in nonresidential districts not exceeding four square feet in area and three feet in height (if freestanding), with no more than two signs per street frontage.
- Signs incorporated into machinery or equipment by a manufacturer or distributor.
- Signs carried by a person.
- Murals consisting of original, painted artwork on walls or similar building areas.
- Signs located on or within public or semi-public athletic fields affixed to scoreboards, buildings, or structures facing the field.
- Each residential property may display a permanent sign not to exceed two square feet in area visible from the public right-of-way.
- On-premises temporary signs up to 32 square feet.
- Signs that are not designed or located so as to be visible from any street or adjoining property.
Sign Plan & Submission Notes for Sebring
- A plan, sketch, blueprint, or similar presentation drawn to scale is required as part of the sign permit application, showing the sign, all structural details, location in relation to setbacks, streets, existing signs and buildings, wind pressure requirements, and materials.
- A sign application may include more than one sign, as applicable.
- In the case of temporary inflatable signs, the applicant must provide a scaled drawing of the sign, square footage calculation, and a scaled site plan showing the location and height of the inflatable display, buildings, structures, and required setbacks.
- Applications for signs within the Community Redevelopment Agency (CRA) district or Historic District may require review and approval by the CRA board and/or historic preservation commission before a sign permit is issued.
- Permanent signs within the historic district or on locally designated historic property require a certificate of appropriateness, which may be reviewed by staff or by the historic preservation commission.
- Variances from sign code provisions may require a hearing before the city planning and zoning board or the historic preservation commission depending on the property, with appeals possible to the city council.
Source: municode municipal code