Sign Regulations in Colquitt, Georgia
Colquitt, Georgia has specific sign regulations covering 12 sign types across 5 zoning districts. Regulated sign types include Identification Sign, Temporary Real Estate Sign, General Off-Premises Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Colquitt, Georgia
Sample Sign Requirements in Colquitt
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Identification Sign | 35 ft | 150 sq ft (general); 2 sq ft (CBD, see C-2 for full CBD rules) | Not listed |
| Real Estate Sign | Not listed | 10 sq ft (residential zones), 32 sq ft (all other zones) | Not listed |
| Construction Sign | Not listed | 50 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
12
- Identification Sign
- Temporary Real Estate Sign
- General Off-Premises Sign
- Real Estate Sign
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Colquitt
Other Cities in Georgia
Frequently Asked Questions
In Colquitt, the height limit for Ground Sign in the C-2 Central Business District (C-2) is 3 ft. The height limit for Wall Sign in the C-2 Central Business District (C-2) is 5 feet vertical dimension (wall/canopy signs, 1-2 story bldgs). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Colquitt require a permit. We haven't published Colquitt's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Colquitt's sign code covers 12 sign types, including Identification Sign, Temporary Real Estate Sign, General Off-Premises Sign, and Real Estate Sign. Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: Signs required by law. The full list is on this page.
In Colquitt, Wall Sign in the C-2 Central Business District (C-2) must be set back at least 24 inches from adjacent property lines. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Colquitt's sign ordinance that cover digital, changing, or flashing signs: No sign shall be erected or continued that would tend by its location, color or nature, to be confused with or obstruct the view of traffic signs or signals, or to be confused with a flashing light of an emergency vehicle. Flashing devices other than those that indicate customary public information (such as time, date, temperature) shall not be permitted upon a sign. No flashing billboard shall be permitted and all billboard lighting shall be indirect. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Colquitt Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Colquitt, Georgia, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Colquitt, Georgia Sign Rules at a Glance
Colquitt, Georgia regulates 12 sign types across 5 zoning districts. Off-Premises Billboards are capped at 40 ft tall and 400 sq ft per face. Most commercial signs in Colquitt require a permit.
Detailed Sign Ordinance Requirements for Colquitt, Georgia
Sign Rules by Zoning District in Colquitt (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 5 | 40 ft | 400 sq ft per face | Not listed |
| R-1 Single-Family Residential District (R-1), R-2 Single-Family, Two-Family and Multiple-Family Residential District (R-2), R-PUD Residential Planned Unit Development District (R-PUD), AG Agricultural District (AG) | 2 | Not listed | 10 sq ft | Not listed |
| R-OI Restricted Office-Institutional District (R-OI) | 2 | 35 ft | 150 sq ft | Not listed |
| C-1 Neighborhood Commercial District (C-1), C-3 Highway Commercial District (C-3), C-PUD Commercial Planned Unit Development District (C-PUD), I Industrial District (I) | 4 | 40 ft | 400 sq ft per face | Not listed |
| C-2 Central Business District (C-2) | 4 | 5 feet vertical dimension (wall/canopy signs, 1-2 story bldgs) | 150 sq ft or 10% of building facade area, whichever is less (single- or two-story buildings) | Not listed |
Zone-by-Zone Sign Requirements in Colquitt(sample of 3 of 5 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign | 35 ft | 150 sq ft (general); 2 sq ft (CBD, see C-2 for full CBD rules) | Not listed | Not listed | Not listed | On premises; CBD restrictions per C-2 | Not listed | Unlock | Art. XVIII, Sec. 18.01, 18.02, 18.03, 18.04, 18.05, 18.06, 18.08 |
| Real Estate Sign | Not listed | 10 sq ft (residential zones), 32 sq ft (all other zones) | Not listed | Not listed | Not listed | On property for sale or lease | Not listed | Unlock | Art. XVIII, Sec. 18.05(6) |
| Construction Sign | Not listed | 50 sq ft | Not listed | Not listed | Not listed | On construction site | Not listed | Unlock | Art. XVIII, Sec. 18.05(10) |
| Off-Premises Billboard | 40 ft | 400 sq ft per face | Not listed | Not listed | One per structure, one per direction | Only on designated federal and state highways, 2000 ft spacing between billboards (same side of road) | Not listed | Unlock | Art. XVIII, Sec. 18.07(1) |
| General Off-Premises Sign | Not listed | 40 sq ft | Not listed | Not listed | Not listed | On all city streets and state highways | Not listed | Unlock | Art. XVIII, Sec. 18.07(2) |
C-1 Neighborhood Commercial District (C-1), C-3 Highway Commercial District (C-3), C-PUD Commercial Planned Unit Development District (C-PUD), I Industrial District (I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign | 35 ft | 150 sq ft | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | Art. XVIII, Sec. 18.06, 18.08 |
| Temporary Real Estate Sign | Not listed | 32 sq ft | Not listed | Not listed | Not listed | On property for sale or lease | Not listed | Unlock | Art. XVIII, Sec. 18.05(6) |
| Billboard / Off-Premises Sign | 40 ft | 400 sq ft per face | Not listed | Not listed | 1 per structure per direction | Federal/state highways only (C-3, I) | Not listed | Unlock | Art. XVIII, Sec. 18.07(1) |
| General Off-Premises Sign | Not listed | 40 sq ft | Not listed | Not listed | Not listed | On city streets and state highways | Not listed | Unlock | Art. XVIII, Sec. 18.07(2) |
C-2 Central Business District (C-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | 5 feet vertical dimension (wall/canopy signs, 1-2 story bldgs) | 150 sq ft or 10% of building facade area, whichever is less (single- or two-story buildings) | Not listed | At least 24 inches from adjacent property lines | 2 per business (corner: +1 on side/rear per rules above) | On primary facade as per sign types (see Section 18.11) | Not listed | Unlock | Art. XVIII, Sec. 18.09, 18.10, 18.11 |
| Ground Sign | 3 ft | 12 sq ft (on one side only) | Not listed | Not listed | Not listed | On site of business | Not listed | Unlock | Art. XVIII, Sec. 18.11(4) |
| Window Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Inside or on window glazing facing street | Not listed | Unlock | Art. XVIII, Sec. 18.11(3) |
| Projecting Sign | Not listed | 25 sq ft | Not listed | Not listed | Not listed | Perpendicularly from building within allowed sign location zones | Not listed | Unlock | Art. XVIII, Sec. 18.09(4) |
PermitPal covers all 5 zoning districts in Colquitt. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Colquitt
- No sign shall be erected or continued that obstructs the sign distance along a public right-of-way.
- No sign shall be erected or continued that would tend by its location, color or nature, to be confused with or obstruct the view of traffic signs or signals, or to be confused with a flashing light of an emergency vehicle.
- No sign shall be erected or continued that would by its nature or moving parts tend to confuse motorists or create any potential hazard to motorists.
- No sign shall be erected or continued that uses admonitions such as 'stop', 'go', 'slow', 'danger', etc., which might be confused with traffic directional signals.
- No sign shall be attached to or painted on any utility pole or light pole, or any tree, rock or other natural object.
- No signs other than those erected by public governmental agencies or required by law shall be placed so as to overhang any portion of public right-of-ways or other public properties by more than six (6) inches.
- Illumination devices (such as flood or spot lights) for signs must be so placed and shielded as to prevent rays or beams of illumination from being cast into neighboring dwellings and/or approaching vehicles.
- Signs may not utilize the colors red, green, blue and yellow in any way which might be confused with traffic, safety, or emergency signals.
- No revolving or rotating beam or beacon of light that resembles or simulates any emergency device shall be permitted as part of any sign.
- Flashing devices other than those that indicate customary public information (such as time, date, temperature) shall not be permitted upon a sign.
- Signs shall have a maximum height of thirty five (35) feet.
- Non-conforming point of business signs, incidental use signs, and identification signs shall be removed or made to conform within one (1) year of effective date of this Ordinance.
- No flashing billboard shall be permitted and all billboard lighting shall be indirect.
- Within one hundred (100) feet of a residential zone lot line, sign illumination must be diffused or indirect to prevent direct rays of light from shining into those adjoining zones.
- So-called 'portable signs on wheels or designed for wheels and other apparatuses designed to allow for illumination and the changing of lettering' are not permitted.
- Off-premises advertisement signs (billboards) are not permitted in the CBD.
- No sign shall be erected or painted on the roof of any building.
- No changing signs (such as a time and temperature sign, rotating sentence, etc.) shall be permitted in the CBD.
- Signs that advertise an activity, business product or service no longer being conducted or available on the premises on which the sign is located must be removed upon the order of the City Clerk.
- Enclosed lamp plastic signs and backlit fluorescent signs are not allowed in the Central Business District.
- Plastic signs, neon or reflective or foam lettering, posters, and cardboard are not allowed as sign materials in the CBD.
- Historically inappropriate signs (e.g. 'Colonial Era' or 'Williamsburg' signage) are not allowed in the CBD.
- Sign materials in the CBD must be compatible with the period and style of the property building or site and certain materials (metal slats, rigid plastic, aluminum canopies, cedar or plastic shakes, glossy or leatherette finished vinyl) are not allowable for awnings in the CBD.
- No sign may be closer than twenty-four (24) inches to the adjacent property lines in the CBD to avoid sign messages from running together.
Exempt Signs in Colquitt
- Signs to regulate traffic.
- Signs required by law.
- Warning signs and no trespassing signs.
- Signs established by governmental agencies.
- Signs not exceeding ten (10) square feet giving information concerning the location of accessory off-street parking facilities or loading and unloading facilities.
- Temporary real estate signs on residentially zoned property limited to a maximum of ten (10) square feet and temporary real estate signs in any zones other than residential to a maximum of thirty two (32) square feet.
- Any sign not exceeding ten (10) square feet other than advertising, separate use, or signs requiring electrical wiring.
- Temporary signs on private land or for religious, charitable, civic, fraternal, political, or similar organizations.
- A temporary sign for a non-conforming business not exceeding a maximum of thirty two (32) square feet.
- Construction signs and temporary subdivision signs not exceeding a maximum of fifty (50) square feet.
Sign Plan & Submission Notes for Colquitt
- All signs within Colquitt must be erected, constructed, or maintained in accordance with applicable sections of the Colquitt Building Code and only those signs permitted by these regulations.
- Property owners within the Central Business District (CBD) must comply with the provisions of the City of Colquitt Historic Preservation Ordinance regarding signs.
- In the CBD, the City Clerk may consult with the Southwest Georgia Regional Development Center's Historic Preservation Planner when interpreting sign regulations.
- Sign installation in the CBD must not irreparably damage any cornice, ornament, or similar architectural detail and shall be the least damaging method feasible.
- Signs in the CBD must be compatible with the size, scale, and design of the property, building, or site upon which they are to be located.
- No billboard or off-site advertising sign may be installed without meeting strict state and federal guidelines in addition to these city requirements.
- Sign illumination within one hundred (100) feet of a residential zone lot line must be diffused or indirect; owners must comply within thirty (30) days from the effective date of this Ordinance.
- Owners of signs are responsible for meeting codes, such as the National Electrical Code, regarding placement and/or height when and where there is a conflict or potential conflict with City utilities.
- Permits are NOT required for exempted signs as listed in Section 18.05. All other signs require compliance with sign ordinance and City Building Code.
Source: municode municipal code