Questions? Call us at (262) 218-2915

Sign Regulations in Dublin, Georgia

Dublin, Georgia has specific sign regulations covering 22 sign types across 4 zoning districts. Regulated sign types include Window Sign, Project Entrance Sign (State or Federal Highway), Project Entrance Sign (Other Roads). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Dublin, Georgia

Sample Sign Requirements in Dublin

Sign TypeMax HeightMax AreaSetback
Flag25 ft or the height of the primary structure, whichever is less for residential; 60 ft or the height of the primary structure, whichever is less for commercial or industrial150 sq ft (other than U.S. flag; federal law governs U.S. flag size)Not listed
Small Sign3 ft (if ground sign); n/a for wall/window< 1 sq ft (single sign) or < 3 ft height (ground sign)Not listed
Ground Sign6 ft6 sq ft per sign face10 ft from right-of-way, or base on district structure setbacks if less than 10 ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for DublinFull Coverage

Sign Types Covered

22

  • Window Sign
  • Project Entrance Sign (State or Federal Highway)
  • Project Entrance Sign (Other Roads)
  • Wall Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Dublin

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

In Dublin, the height limit for Ground Sign (Large P-1 Site) in the P, P-1, H-1 zoning districts is 25 ft (Sec. 3-37(c)(5)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Dublin require a permit. From the submission notes on this page: All signs require a sign permit from the building superintendant unless specifically exempted; applications must include a drawing of the proposed sign and construction specifications. Run a code check for an exact address to see the permit requirements for that zone.

Dublin's sign code covers 22 sign types, including Window Sign, Project Entrance Sign (State or Federal Highway), Project Entrance Sign (Other Roads), and Wall Sign. Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: Replacement of the sign copy, repainting, cleaning, or normal maintenance or repair of a sign or sign structure for which a permit has previously been issued, so long as the sign is not enlarged or otherwise modified. The full list is on this page.

This page doesn't list a single setback distance for signs in Dublin. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Dublin's sign ordinance that cover digital, changing, or flashing signs: Moving signs or signs with moving parts are prohibited, including but not limited to animated signs involving motion or sound, signs with moving words, and wind/motorized waving elements (excluding multiple-message signs as specifically defined). No flash/blinking illumination or any images/pictures changing more frequently than once per minute (unless otherwise expressly provided) is allowed on signs. Applications for multiple message signs using electronic lighting must include a copy of the sign manufacturer's specifications for luminosity. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Dublin Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Dublin, Georgia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Dublin, Georgia Sign Rules at a Glance

Dublin, Georgia regulates 22 sign types across 4 zoning districts. Ground Signs (Standard) in the P, P-1, H-1 zoning districts are capped at 5 ft tall and 35 sq ft per sign face (Sec. 3-37(c)(1)). Most commercial signs in Dublin require a permit.

Detailed Sign Ordinance Requirements for Dublin, Georgia

Sign Rules by Zoning District in Dublin (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones325 ft or the height of the primary structure, whichever is less for residential; 60 ft or the height of the primary structure, whichever is less for commercial or industrial150 sq ft (other than U.S. flag; federal law governs U.S. flag size)Not listed
A-1, R-1, R-2, R-3, R-4, R-556 ft32 sq ft per sign faceNot listed
P, P-1, H-1625 ft200 sq ft per faceNot listed
B-1, B-2, B-3, M-1, M-216100 ft382 sq ft (sign face), double-faced allowed; embellishments not exceeding 100 sq ft additionalNot listed

Zone-by-Zone Sign Requirements in Dublin(sample of 3 of 4 zones)

A-1, R-1, R-2, R-3, R-4, R-5

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign6 ft6 sq ft per sign faceNot listed10 ft from right-of-way, or base on district structure setbacks if less than 10 ft3 per lotPer lotNot listedUnlockSec. 3-37(b)(1)
Window SignNot listed10% of window area facing road frontageNot listedNot listedNot listedWindows facing road frontageNot listedUnlockSec. 3-37(b)(2)
Wall SignNot listedNot listedNot listedNot listed0Not listedNot listedUnlockSec. 3-37(b)(3)
Project Entrance Sign (State or Federal Highway)6 ft32 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on state or federal highwaysNot listedUnlockSec. 3-37(b)(4)a
Project Entrance Sign (Other Roads)4 ft16 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on roads other than state or federal highwaysNot listedUnlockSec. 3-37(b)(4)b

P, P-1, H-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign (Standard)5 ft35 sq ft per sign faceNot listed10 ft from right-of-way, or based on district structure setbacks if less than 10 ft1 per lot, plus additional as describedPer lotNot listedUnlockSec. 3-37(c)(1)
Ground Sign (Large P-1 Site)25 ft200 sq ft per faceNot listed10 ft from right-of-way, or based on district structure setbacks1 per lotP-1 district, site >30 acres AND ≥500 ft continuous road frontageNot listedUnlockSec. 3-37(c)(5)
Window SignNot listed10% of window area facing road frontageNot listedNot listedNot listedWindows facing road frontageNot listedUnlockSec. 3-37(c)(2)
Wall SignNot listed10 sq ftNot listedNot listed1 per street frontagePer street frontageNot listedUnlockSec. 3-37(c)(3)
Project Entrance Sign (State or Federal Highway)6 ft32 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on state or federal highwaysNot listedUnlockSec. 3-37(c)(4)a
Project Entrance Sign (Other Roads)4 ft16 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on roads other than state or federal highwaysNot listedUnlockSec. 3-37(c)(4)b

B-1, B-2, B-3, M-1, M-2

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign (Standard)25 ft100 sq ft per sign faceNot listed10 ft from right-of-way, or as per district structure setbacks1 per street frontage1 per street frontageNot listedUnlockSec. 3-37(d)(1)
Ground Sign (Multi-Tenant <25,000 GLA)15 ft32 sq ft per sign faceNot listed10 ft from right-of-way, or as per district structure setbacks1 additional (in addition to standard ground sign)Additional ground sign per lot with required frontageNot listedUnlockSec. 3-37(d)(4)a
Ground Sign (Multi-Tenant 25,000+ GLA)Not listed175 sq ft (25,000-100,000 GLA); 200 sq ft (100,000-300,000 GLA); 300 sq ft (>300,000 GLA)Not listed10 ft from right-of-way, or as per district structure setbacks1 per first 500 ft, plus 1 for each additional 500 ft1 per 500 linear feet of street frontage, must be ≥250 ft apartNot listedUnlockSec. 3-37(d)(4)b
Wall Sign (Up to 50 ft from ROW)Not listed100 sq ftNot listedNot listed1 per street frontagePer street frontage, building ≤ 50 ft from right-of-wayNot listedUnlockSec. 3-37(d)(3)a
Wall Sign (51-100 ft from ROW)Not listed150 sq ftNot listedNot listed1 per street frontagePer street frontage, wall sign >50 ft and ≤100 ft from ROWNot listedUnlockSec. 3-37(d)(3)b
Project Entrance Sign (State or Federal Highway)6 ft32 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on state or federal highwaysNot listedUnlockSec. 3-37(d)(5)a
Project Entrance Sign (Other Roads)4 ft16 sq ft per sign faceNot listedNot listed2 sign faces per entranceAt entrance on roads other than state or federal highwaysNot listedUnlockSec. 3-37(d)(5)b
Interstate Highway Sign100 ft200 sq ft per faceNot listedNot listed1 per parcel (in addition to any other permitted ground sign)Within 660 ft of I-16 right-of-way in B-2, M-1, M-2 zones only; visible from interstateNot listedUnlockSec. 3-37(f)

PermitPal covers all 4 zoning districts in Dublin. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Dublin

  • No sign structure shall be placed or maintained except in conformity with the article.
  • Violations shall be punished as a misdemeanor and the city reserves the right to take legal action to remove or enforce removal of signs erected in violation.
  • No sign may depict obscenity as defined by O.C.G.A. § 106-12-80.
  • No sign may depict sexual conduct or sexually explicit nudity as defined in O.C.G.A. § 36-60-3.
  • No sign may advertise any activity illegal under the laws of Georgia or the United States.
  • Roof signs (signs mounted above a roof, projecting above the roofline, or painted on the roof) are prohibited in every zoning district.
  • Rotating signs are prohibited, except for barber poles attached to barber shops.
  • Moving signs or signs with moving parts are prohibited, including but not limited to animated signs involving motion or sound, signs with moving words, and wind/motorized waving elements (excluding multiple-message signs as specifically defined).
  • Signs on public rights-of-way, other than publicly-owned or maintained signs, are prohibited.
  • Signs which contain words, pictures or statements that are obscene (O.C.G.A. § 16-12-80) are prohibited.
  • Signs which simulate official traffic control or warning signs or obscure any traffic or street sign, signal or public service sign are prohibited.
  • Signs which emit or utilize any sound detectable from a traveled road or highway are prohibited.
  • Signs which interfere with road or highway visibility or obstruct or otherwise interfere with the safe and orderly movement of traffic are prohibited.
  • Any sign that interferes with utilities, including water mains, hydrants, sewerage, gas, electricity, communications equipment or lines, or stormwater drainage facilities, is prohibited.
  • Portable signs, as defined, are prohibited in any zoning classification after January 1, 2015.
  • No sign or sign structure may be erected or maintained that obstructs any fire escape, ventilation, or door, nor attached to a fire escape.
  • No sign structure above a height of three (3) feet shall be maintained within twenty-five (25) feet of the intersection of right-of-way lines of two streets or a street and a railroad right-of-way.
  • No sign or sign structure shall obstruct the traffic sight line or view of vehicles entering the roadway; no sign shall be erected on any traffic island.
  • No flash/blinking illumination or any images/pictures changing more frequently than once per minute (unless otherwise expressly provided) is allowed on signs.
  • No external or internal illumination causing confusion with or distraction from a traffic signal or safety device is allowed.
  • No sign shall give off light which glares, blinds, or adversely affects traffic or adjacent properties.

Exempt Signs in Dublin

  • Signs erected by a public officer in the performance of official duties, including but not limited to public notices, safety signs, danger signs, traffic and street signs, memorial plaques, and historical markers.
  • Small signs (less than one square foot in area, either wall or window signs, or ground signs less than three feet in height), provided they are not located in the public right-of-way.
  • Street address identifiers and building identification numbers on multitenant buildings which are essential to locating such buildings.
  • Seasonal displays located outside the public right-of-way and erected for a maximum period of thirty days.
  • Signs located next to drive-through lanes, not exceeding six feet in height or thirty-six square feet in area.
  • Traffic safety and traffic directional signs (including direction of travel, speed limits, etc.) along private streets and driveways, and in off-street parking lots that are installed per the requirements of the City of Dublin and do not exceed four square feet each.
  • Signs erected more than two feet inside a building.
  • Building markers (any sign cut into a masonry surface or made of bronze or other permanent material) and integral decorative or architectural features.
  • Handicapped parking signs, when required per local, state, or federal law.
  • Replacement of the sign copy, repainting, cleaning, or normal maintenance or repair of a sign or sign structure for which a permit has previously been issued, so long as the sign is not enlarged or otherwise modified.

Sign Plan & Submission Notes for Dublin

  • All signs require a sign permit from the building superintendant unless specifically exempted; applications must include a drawing of the proposed sign and construction specifications.
  • Sign plans (drawings/specifications) prepared and signed by an architect or engineer licensed by the State of Georgia must be submitted with a sign permit application.
  • Applications for multiple message signs using electronic lighting must include a copy of the sign manufacturer's specifications for luminosity.
  • For fixed, nonchanging signs directing the public to emergency services in the P-1 district (public, >30 acres and 500 feet frontage), sign size, shape, and number may exceed standard limits, subject to presentation of a plan to and approval by the building superintendent.
  • Variance applications for sign regulations must be submitted to the building inspector and heard by the Board of Zoning Appeals at a public meeting.

Source: municode municipal code