Questions? Call us at (262) 218-2915

Sign Regulations in Hawkinsville, Georgia

Hawkinsville, Georgia has specific sign regulations covering 14 sign types across 10 zoning districts. Regulated sign types include Freestanding Sign - Individual Use, Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc., Project Entrance Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hawkinsville, Georgia

Sample Sign Requirements in Hawkinsville

Sign TypeMax HeightMax AreaSetback
Freestanding Sign - Individual Use5 feet6 square feet (face area); 6 square feet (structure area)Not listed
Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc.Not listed1 square foot per wallNo part of a building sign may extend above the parapet, eave, ridge line or deck line.
Project Entrance Sign8 feet32 square feet (face area); 96 square feet (structure area)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HawkinsvilleFull Coverage

Sign Types Covered

14

  • Freestanding Sign - Individual Use
  • Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc.
  • Project Entrance Sign
  • Freestanding Sign - Multi-Tenant
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hawkinsville

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Hawkinsville, the height limit for Freestanding Sign - Multi-Tenant in the B-2 Business District (B-2) is 40 feet (Sec. 3.6.7(a)). Maximum sign heights range from 8 feet to 40 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hawkinsville require a permit. From the submission notes on this page: For relief from signage height, number, and copy area requirements in accordance with a coordinated signage plan, application for a special exception must be made to the Board of Commissioners. Run a code check for an exact address to see the permit requirements for that zone.

Hawkinsville's sign code covers 14 sign types, including Freestanding Sign - Individual Use, Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc., Project Entrance Sign, and Freestanding Sign - Multi-Tenant. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Window displays of goods available on a site are not considered to be signs and are exempt from the sign regulations. The full list is on this page.

This page doesn't list a single setback distance for signs in Hawkinsville. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Hawkinsville's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Hawkinsville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hawkinsville, Georgia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Hawkinsville, Georgia Sign Rules at a Glance

Hawkinsville, Georgia regulates 14 sign types across 10 zoning districts. Instructional Signs are capped at 4 feet tall and 12 square feet (Sec. 3.6.7(b)(3)). Most commercial signs in Hawkinsville require a permit.

Detailed Sign Ordinance Requirements for Hawkinsville, Georgia

Sign Rules by Zoning District in Hawkinsville (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
A-1 Agricultural District (A-1), R-1 Single-Family Residential District (R-1), R-2 Single-Family Residential District (R-2), R-3 Single and Two-Family Residential District (R-3)38 feet32 square feet (face area); 96 square feet (structure area)Not listed
R-4A Multiple Family Residential District (R-4A), R-4 Multiple Family Residential District (R-4)38 feet32 square feet (face area); 96 square feet (structure area)Not listed
P Professional District (P)530 feet80 square feet (face area); 120 square feet (structure area)Not listed
B-2 Business District (B-2)640 feet200 square feet (face area); 300 square feet (structure area)Not listed
B-1 Business District (B-1)640 feet300 square feet (face area); 400 square feet (structure area)Not listed
I Industrial District (I)530 feet160 square feet (face area); 240 square feet (structure area)Not listed
Historic District Overlay (HD)1Not listedNot listedNot listed
River Corridor Protection District1Not listedNot listedNot listed
Groundwater Recharge Area District1Not listedNot listedNot listed
General Regulations For All Zones712 feet64 square feetNot listed

Zone-by-Zone Sign Requirements in Hawkinsville(sample of 3 of 10 zones)

B-2 Business District (B-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign - Individual Use25 feet100 square feet (face area); 175 square feet (structure area)Not listedNot listed1 per street frontage1 per street frontageNot listedUnlockSec. 3.6.7(a)
Freestanding Sign - Multi-Tenant40 feet200 square feet (face area); 300 square feet (structure area)Not listedNot listed1 per street frontage1 per street frontage (per planned center)Not listedUnlockSec. 3.6.7(a)
Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc.Not listedNot listedNot listedNot listedNot listedPer building wall facing street; signage calculation is by building side and by tenant wall frontage if multiple tenants.Not listedUnlockSec. 3.6.7(a)
Occupant Directory5 feet12 square feet (face area); 16 square feet (structure area)Not listedNot listed1 per building1 per building (planned centers w/ 2+ principal buildings or buildings accessed via enclosed hallway/atrium). May be freestanding or wall.Not listedUnlockSec. 3.6.7(a)
Project Entrance Sign8 feet32 square feet (face area); 96 square feet (structure area)Not listedNot listed1 per entranceAt each entranceNot listedUnlockSec. 3.6.7(a)
Portable Reader Board SignNot listed32 square feetNot listedNot listed1 per businessOn-site, permanently installedNot listedUnlockSec. 3.6.7(b)(8)

B-1 Business District (B-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign - Individual Use40 feet250 square feet (face area); 300 square feet (structure area)Not listedNot listed1 per street frontage1 per street frontageNot listedUnlockSec. 3.6.7(a)
Freestanding Sign - Multi-Tenant40 feet300 square feet (face area); 400 square feet (structure area)Not listedNot listed1 per street frontage1 per street frontage (per planned center)Not listedUnlockSec. 3.6.7(a)
Building Sign - Awning, Canopy, Projecting Wall, Incidental, Roof & Window Signs, etc.Not listedNot listedNot listedNot listedNot listedPer building wall facing street; signage calculation is by building side and by tenant wall frontage if multiple tenants.Not listedUnlockSec. 3.6.7(a)
Occupant Directory5 feet12 square feet (face area); 16 square feet (structure area)Not listedNot listed1 per building1 per building (planned centers w/ 2+ principal buildings or buildings accessed via enclosed hallway/atrium). May be freestanding or wall.Not listedUnlockSec. 3.6.7(a)
Project Entrance Sign8 feet32 square feet (face area); 96 square feet (structure area)Not listedNot listed1 per entranceAt each entranceNot listedUnlockSec. 3.6.7(a)
Portable Reader Board SignNot listed32 square feetNot listedNot listed1 per businessOn-site, permanently installedNot listedUnlockSec. 3.6.7(b)(8)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Civic, Religious, and School Support SignNot listed32 square feetNot listedNot listedNot listedNot listedNot listedUnlockSec. 3.6.7(b)(1)
Construction SignNot listed16 sqft for single-family residence; 100 sqft for multi-family or nonresidential developmentNot listedNot listed1 per property typeNot listedNot listedUnlockSec. 3.6.7(b)(2)
Instructional Sign4 feet12 square feetNot listedNot listedNot listedNot listedNot listedUnlockSec. 3.6.7(b)(3)
Official or Personal Flagflagpole shall not exceed height limitation of zoning district32 square feetNot listedNot listedUp to 3 (1 US, 1 state/gov, 1 other)On flagpole or displayNot listedUnlockSec. 3.6.7(b)(4)
Real Estate Directional SignNot listed4 square feetNot listedNot listed2 per lot, 4 per developmentNot listedNot listedUnlockSec. 3.6.7(b)(5)
Recreational Support Sign12 feet64 square feetNot listedNot listedNot listedWalls, fences, dugouts, ticket booths at athletic/recreation facilityNot listedUnlockSec. 3.6.7(b)(6)
Worship Directional SignNot listed6 square feetNot listedNot listed4 per churchNot listedNot listedUnlockSec. 3.6.7(b)(7)

PermitPal covers all 10 zoning districts in Hawkinsville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Hawkinsville

  • No sign shall be erected or maintained where, by reason of its position, wording, illumination, size, shape or color, it may obstruct the view of oncoming vehicles or impair, obscure, interfere with the view of, or be confused with any authorized traffic control sign, signal, or device.
  • No sign shall contain or be an imitation of an official governmental traffic control sign, signal, or emergency vehicle device.
  • No part of any sign shall be located in, over, or project into a public right-of-way except for awning signs, canopy signs, or projecting signs in the B-2 zoning district. In the B-2 zoning district, awning, canopy, and projecting signs shall not extend into or over the roadway.
  • No sign shall be erected, located, or maintained in such a manner as to interfere with safe and free ingress and egress of any door, emergency exit, driveway, street, or roadway.
  • No lighted signs shall be constructed or maintained within one hundred (100) feet of any single-family dwelling.
  • No building sign shall extend above the top edge of the parapet or eave of a flat or shed roof; the ridge line of a gable, hip, or gambrel roof; or the deck line of a mansard roof.
  • Prohibited signs (may not be placed on or attached to any property, building, structure, or place): Animated signs (except certain rotating signs and specified electronic message boards), derelict signs, inflatable signs, pennants, portable signs, sound or smoke emitting signs, streamers.
  • All signs for which a building permit is required shall be constructed and maintained in conformance with Building Code and Electrical Code requirements.
  • All signs, together with their supports, braces, guys, and anchors, shall be kept in good repair and, unless constructed of plastic or galvanized or noncorroding metal, shall be given a protective coating as necessary to maintain a clean appearance and safe condition.
  • Awning and canopy signs must provide at least eight (8) feet clearance above ground when over pedestrian walkways, seventeen (17) feet clearance when over driveways or vehicle areas. Suspended canopy signs must be at least four (4) inches from the building face and at least eight (8) inches from the edge of the canopy.
  • Banners are allowed only as wall or window signage placed flush upon the wall or window. Banners shall not be hung as canopy signs, flown as flags, or used as any other form of sign.
  • Projecting signs are limited to one per tenant on a property; each tenant may have no more than one projecting sign or canopy sign.
  • Any sign within six hundred sixty (660) feet of a state or U.S. numbered highway that advertises or offers anything for sale or lease not located on the property where the sign is located must be zoned for commercial or industrial use.

Exempt Signs in Hawkinsville

  • Window displays of goods available on a site are not considered to be signs and are exempt from the sign regulations.
  • Official signs placed by governmental bodies, agencies, or public authorities, including, but not limited to, traffic signs, signals, or regulatory devices or warnings; official emblems, public notices, or official instruments; signs of historical interest, or other similar signs or devices authorized within all rights-of-way or other properties controlled by such governmental bodies, agencies, or authorities are exempt.
  • Property address signs limited in content to the street address number of the building or property to which it is affixed are exempt.
  • Exempt signs specified in Section 3.6.6, such as official and property address signs, may be erected in any zoning district.

Sign Plan & Submission Notes for Hawkinsville

  • A sign may be erected, placed, established, painted, created, or maintained only in conformance with the standards and other requirements or exemptions contained in these sign regulations, or as otherwise provided for nonconforming signs under article 1 of these Unified Land Development Regulations.
  • All signs for which a building permit is required must be constructed and maintained in conformance with Building Code and Electrical Code requirements, and plans for all freestanding signs must be certified for structural integrity.
  • For relief from signage height, number, and copy area requirements in accordance with a coordinated signage plan, application for a special exception must be made to the Board of Commissioners.
  • Variances and/or special exceptions regarding signage will require a Board of Commissioners meeting for review and approval, under the established appeals process (Article 6, Division 10).

Source: municode municipal code