Sign Regulations in Sandersville, Georgia
Sandersville, Georgia has specific sign regulations covering 21 sign types across 5 zoning districts. Regulated sign types include Window Sign, Wall Sign (Planned Center), Ground Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Sandersville, Georgia
Sample Sign Requirements in Sandersville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground Sign | 5 ft | 16 sq ft per sign face; max total 32 sq ft | At least 10 ft from public right-of-way or curb; all setbacks of chapter apply. |
| Window Sign | Not listed | 8 sq ft (total, both signs) | Not listed |
| Entrance Sign (Subdivision/Development) | 6 ft | 32 sq ft per sign | Setback from right-of-way equal to sign height + 1 ft; cannot block traffic sight lines. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Window Sign
- Wall Sign (Planned Center)
- Ground Sign
- Entrance Sign (Subdivision/Development)
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Sandersville
Other Cities in Georgia
Frequently Asked Questions
In Sandersville, the height limit for Ground Sign (Planned Center) in the I-1 light industrial district (I-1), I-2 heavy industrial district (I-2) is 35 ft (Sec. 8-4-84(f)(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Sandersville require a permit. From the submission notes on this page: A permit application must include a site plan drawn to scale showing the location of the sign on the lot, including setbacks (Sec. 8-4-88(c)(1)d). Run a code check for an exact address to see the permit requirements for that zone.
Sandersville's sign code covers 21 sign types, including Window Sign, Wall Sign (Planned Center), Ground Sign, and Entrance Sign (Subdivision/Development). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Permit not required for signs 4 square feet or less unless otherwise specified (Sec. 8-4-88(a)). The full list is on this page.
In Sandersville, Ground Sign (Individual Use, >10,000 sq ft building) in the C-1 central business district (C-1) and other zoning districts must be set back at least 10 ft from right-of-way (Sec. 8-4-84(c)(1)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Sandersville's sign ordinance that cover digital, changing, or flashing signs: Except where expressly permitted, changing copy, moving signs, or signs with moving parts are prohibited (including animated signs, fluttering ribbons, trivision-type signs, or LED/EVMC signs with content that changes more than once daily, etc) (Sec. 8-4-87(4)). Flags (mounted to a pole from one side and not otherwise animated) are regulated as signs but not prohibited under animated/portable sign bans (Sec. 8-4-83(d), Sec. 8-4-87(4)). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Sandersville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Sandersville, Georgia, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Sandersville, Georgia Sign Rules at a Glance
Sandersville, Georgia regulates 21 sign types across 5 zoning districts. Ground Signs (Planned Center) in the I-1 light industrial district (I-1), I-2 heavy industrial district (I-2) are capped at 35 ft tall, set back at least 10 ft from right-of-way (Sec. 8-4-84(f)(1)). Most commercial signs in Sandersville require a permit.
Detailed Sign Ordinance Requirements for Sandersville, Georgia
Sign Rules by Zoning District in Sandersville (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| A-1 agricultural district (A-1), R-1 single-family residential district (R-1), R-2 single-family residential district (R-2), R-3 multi-family residential district (R-3), R-4 manufactured home community district (R-4) | 4 | 6 ft | 32 sq ft per sign | Not listed |
| C-1 central business district (C-1), C-2 general commercial district (C-2), I-O institutional/office district (I-O) | 10 | 25 ft (C-1, I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 300 sq ft per face; total max 600 sq ft | Not listed |
| I-1 light industrial district (I-1), I-2 heavy industrial district (I-2) | 6 | 35 ft | 300 sq ft per face; total 600 sq ft for both faces | Not listed |
| PUD zoning district (PUD) | 2 | 5 ft | 16 sq ft per face; total max 32 sq ft | Not listed |
| General Regulations For All Zones | 2 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Sandersville(sample of 3 of 5 zones)
A-1 agricultural district (A-1), R-1 single-family residential district (R-1), R-2 single-family residential district (R-2), R-3 multi-family residential district (R-3), R-4 manufactured home community district (R-4)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign | 5 ft | 16 sq ft per sign face; max total 32 sq ft | Not listed | At least 10 ft from public right-of-way or curb; all setbacks of chapter apply. | 2 double-faced signs per lot (total 4 faces if each sign is double-faced) | On lot. Must comply with setbacks and not overhang right-of-way. | Not listed | Unlock | Sec. 8-4-84(b)(1), 8-4-85(c), 8-4-88 |
| Window Sign | Not listed | 8 sq ft (total, both signs) | Not listed | Not listed | 2 per lot | Within windows facing exterior | Not listed | Unlock | Sec. 8-4-84(b)(2) |
| Entrance Sign (Subdivision/Development) | 6 ft | 32 sq ft per sign | Not listed | Setback from right-of-way equal to sign height + 1 ft; cannot block traffic sight lines. | 2 per subdivision development | At entrance to subdivision/development | Not listed | Unlock | Sec. 8-4-84(b)(4), 8-4-85(a)(3) |
| Home Occupation Sign | Not listed | 2 sq ft | Not listed | Not listed | 1 per home occupation | Attached to principal building | Not listed | Unlock | Sec. 8-4-51(3) |
C-1 central business district (C-1), C-2 general commercial district (C-2), I-O institutional/office district (I-O)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign (Individual Use, <10,000 sq ft building) | 25 ft (C-1, I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 100 sq ft per face; total 200 sq ft for all faces | Not listed | At least 10 ft from public right-of-way/curb; no encroachment; all setbacks apply. | 1 double-faced sign per lot | On lot, must comply with setback (see below) | Not listed | Unlock | Sec. 8-4-84(c)(1), 8-4-85(a), 8-4-86(a), 8-4-88 |
| Ground Sign (Individual Use, >10,000 sq ft building) | 25 ft (C-1, I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 200 sq ft per face; total max 400 sq ft for all faces | Not listed | 10 ft minimum from right-of-way | 1 double-faced sign per lot | On lot | Not listed | Unlock | Sec. 8-4-84(c)(1) |
| Ground Sign (Individual Use, >100,000 sq ft building) | 25 ft (C-1, I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 300 sq ft per face; total max 600 sq ft | Not listed | 10 ft minimum from right-of-way | 1 double-faced sign per lot | On lot | Not listed | Unlock | Sec. 8-4-84(c)(1) |
| Wall Sign (All Buildings) | Not listed | Up to 200 sq ft (total, all wall signs per lot, 4 signs max, each up to 50 sq ft) for bldg <10,000 sq ft; up to 250 sq ft (total wall, 4 signs max) for bldg >10,000 sq ft; up to 300 sq ft (total wall, 4 signs max, no single sign over 250 sq ft) for bldg >100,000 sq ft | Not listed | Not listed | 4 per lot | On walls of principal building | Not listed | Unlock | Sec. 8-4-84(c)(3) |
| Entrance Sign (Development) | 6 ft | 32 sq ft per sign | Not listed | Minimum: height of sign + 1 ft from right-of-way | 2 per development | At entrance to development | Not listed | Unlock | Sec. 8-4-84(c)(4), 8-4-85(a)(3) |
| Ground Sign (Planned Center <50,000 sq ft) | 25 ft (C-1/I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 200 sq ft per face; total 400 sq ft for both faces | Not listed | 10 ft minimum from right-of-way | 1 double-faced sign per planned center | At planned center, complies with setbacks | Not listed | Unlock | Sec. 8-4-84(d)(1) |
| Ground Sign (Planned Center >50,000 sq ft) | 25 ft (C-1/I-O), 35 ft (C-2, or 40 ft if US/state highway frontage) | 300 sq ft per face; total 600 sq ft for both faces | Not listed | 10 ft minimum from right-of-way | 1 double-faced sign per center | At planned center | Not listed | Unlock | Sec. 8-4-84(d)(1) |
| Entrance Sign (Planned Center) | 10 ft | 50 sq ft per sign | Not listed | Sign height + 1 ft from right-of-way | 2 per planned center | At entrance to planned center | Not listed | Unlock | Sec. 8-4-84(d)(4), 8-4-85(a)(3) |
I-1 light industrial district (I-1), I-2 heavy industrial district (I-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign (Individual Use, <50,000 sq ft building) | 35 ft | 300 sq ft per face; total 600 sq ft for both faces | Not listed | At least 10 ft from public right-of-way/curb; all setbacks of chapter apply. | 1 double-faced sign per lot | On lot, must comply with setbacks | Not listed | Unlock | Sec. 8-4-84(e)(1), 8-4-85(a) |
| Ground Sign (Planned Center) | 35 ft | 300 sq ft per face; total 600 sq ft for both faces | Not listed | 10 ft minimum from right-of-way | 1 double-faced sign per planned center | At planned center | Not listed | Unlock | Sec. 8-4-84(f)(1) |
| Wall Sign (Individual Use) | Not listed | Up to 200 sq ft (total on all walls) for buildings up to 50,000 sq ft; up to 300 sq ft total for buildings over 50,000 sq ft; no single sign over 200 sq ft | Not listed | Not listed | Not listed | On building walls | Not listed | Unlock | Sec. 8-4-84(e)(3) |
| Wall Sign (Planned Center) | Not listed | Not listed | Not listed | Not listed | 4 per business | On walls of each business in planned center | Not listed | Unlock | Sec. 8-4-84(f)(3) |
| Window Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Windows facing road frontage | Not listed | Unlock | Sec. 8-4-84(e)(2), (f)(2) |
| Entrance Sign (Individual Use or Planned Center) | 10 ft | 50 sq ft per sign | Not listed | At least sign height + 1 ft from right-of-way | 2 per lot or planned center | At entrance | Not listed | Unlock | Sec. 8-4-84(e)(4), (f)(4), 8-4-85(a)(3) |
PermitPal covers all 5 zoning districts in Sandersville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Sandersville
- No sign shall be placed or maintained within the City except in conformity with this article (Sec. 8-4-83(a)).
- No sign may contain messages that depict obscenity, sexual conduct, or sexually explicit nudity as defined by Georgia law (Sec. 8-4-83(b)).
- Signs in excess of 15 feet in height must be constructed according to plans approved by a state registered professional engineer (Sec. 8-4-86(a)).
- Signs which contain or imitate an official traffic sign or signal are prohibited (Sec. 8-4-86(b)).
- No sign or sign structure may obstruct fire escapes, ventilation, or doors, or be attached to a fire escape (Sec. 8-4-86(c)).
- No sign or sign structure above a height of three (3) feet shall be maintained within fifteen (15) feet of the intersection of the right-of-way lines of two (2) streets, or of a street intersection with a railroad right-of-way (Sec. 8-4-86(d)).
- No sign shall obstruct the view of vehicles entering a roadway (Sec. 8-4-86(e)).
- All signs and supports must be kept in good repair; unused sign structures must be removed within 10 days after written notification or 30 days after a sign is no longer used (Sec. 8-4-86(f)).
- The City may remove any sign in violation of the article or posing an immediate safety threat on public property without notice (Sec. 8-4-86(g)).
- Roof signs (signs mounted above or projecting above the roof-line) are prohibited (Sec. 8-4-87(1)).
- Rotating signs are prohibited (Sec. 8-4-87(2)).
- Signs with more than two sides are prohibited (Sec. 8-4-87(3)).
- Except where expressly permitted, changing copy, moving signs, or signs with moving parts are prohibited (including animated signs, fluttering ribbons, trivision-type signs, or LED/EVMC signs with content that changes more than once daily, etc) (Sec. 8-4-87(4)).
- A-frame, sandwich-type, sidewalk, or curb signs are prohibited except in DDA area (Sec. 8-4-87(5)).
- Swinging or projecting signs are prohibited except in DDA area (Sec. 8-4-87(6)).
- Portable signs (mobile, trailer) are prohibited (Sec. 8-4-87(7)).
- No sign or sign structure shall encroach on or overhang the public right-of-way or any other person's property (Sec. 8-4-85(a)(3)).
- No portion of a sign may be located closer than ten (10) feet from the back of the curb of a public roadway or edge of the pavement if no curb (Sec. 8-4-85(a)(3)).
- No sign may be illuminated in a way that glares, blinds, or adversely affects traffic or adjacent properties, or exceeds 0.5 footcandles at any residential property line or 2 footcandles at any public right-of-way (Sec. 8-4-85(c)(7)).
- Signs located in residential districts shall not be illuminated between 10:00 p.m. and 7:00 a.m. (Sec. 8-4-85(c)(1)).
- No external or internal illumination that causes confusion with, or distraction from, any traffic signal or safety device shall be permitted (Sec. 8-4-85(c)(2)).
Exempt Signs in Sandersville
- Any sign not visible from the public right-of-way is not restricted or regulated by this article ('internal signs') (Sec. 8-4-84(h)).
- Any sign located at an outdoor event facility, open to the general public (such as a ball field, racetrack, or amphitheater), and mounted on internal-facing walls of the facility, is exempt from maximum number and square footage restrictions (Sec. 8-4-84(i)).
- Permit not required for signs 4 square feet or less unless otherwise specified (Sec. 8-4-88(a)).
- Flags (mounted to a pole from one side and not otherwise animated) are regulated as signs but not prohibited under animated/portable sign bans (Sec. 8-4-83(d), Sec. 8-4-87(4)).
- Utility poles, lighting standards, traffic and street signs, and trees with branches trimmed to a certain height are exempt from intersection visibility restrictions (Sec. 8-4-23).
- Nonconforming signs that were legal at the time of ordinance adoption may remain, subject to restrictions/regulations in Sec. 8-4-89.
Sign Plan & Submission Notes for Sandersville
- A permit is required for any sign larger than four (4) square feet, except as specifically exempted (Sec. 8-4-88(a)).
- A permit application must include a site plan drawn to scale showing the location of the sign on the lot, including setbacks (Sec. 8-4-88(c)(1)d).
- All signs in excess of fifteen (15) feet in height must present engineered construction plans approved by a state-registered professional engineer (Sec. 8-4-88(c)(1)g; Sec. 8-4-86(a)).
- PUD (Planned Unit Development) districts: A 'sign plan' for any commercial portion of a PUD must be made part of the PUD application process and approved during the rezoning process (Sec. 8-4-84(g)).
- Parties are advised to consult with the zoning administrator to avoid erecting noncompliant signs (Sec. 8-4-88(b)).
- Permit applications for conforming signs require information about type, value, zoning designation, a scale site plan, area calculations, owner information and consent, and engineering plans if over 15 feet in height (Sec. 8-4-88(c)(1)).
- Issuance of a permit does not create a vested right if the sign is later determined not to comply (Sec. 8-4-88(b), (4)).
Source: municode municipal code