Sign Regulations in Cascade, Idaho
Cascade, Idaho has specific sign regulations covering 12 sign types across 3 zoning districts. Regulated sign types include Ground-Mounted Sign, Portable Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Cascade, Idaho
Sample Sign Requirements in Cascade
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground-Mounted Sign | 20 ft | 90 sq. ft. (may be doubled for multi-face signs) | Must not project beyond a legal setback; not within 10 ft of other signs in right of way. |
| Wall Sign | Not listed | Max total for all wall signs: 200 sq. ft. (no one sign over 90 sq. ft.) | No projection over public property or beyond legal setback greater than allowed in Uniform Sign Code. |
| Roof Sign | Max 5 ft above the ridge line or parapet | 50 sq. ft. (may be doubled for multi-face signs) | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
12
- Ground-Mounted Sign
- Portable Sign
- Wall Sign
- Roof Sign
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
Other Cities in Idaho
Frequently Asked Questions
In Cascade, the height limit for Ground-Mounted Sign in the R-II Zone, R-III Zone, RC Zone, A Zone is 4 ft (Sec. 2-2-10(H)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Cascade require a permit. From the submission notes on this page: The Building Official may require the filing of plans or other pertinent information with a sign permit application where such information is necessary to ensure compliance with the ordinance. Run a code check for an exact address to see the permit requirements for that zone.
Cascade's sign code covers 12 sign types, including Ground-Mounted Sign, Portable Sign, Wall Sign, and Roof Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Painting, repainting, or cleaning of an advertising structure, or the changing of the advertising copy or message thereon, does not require a permit unless a structural change is made. The full list is on this page.
This page doesn't list a single setback distance for signs in Cascade. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Cascade's sign ordinance that cover digital, changing, or flashing signs: A conditional use permit (public hearing required) is required for animated signs or other uses otherwise prohibited by the ordinance but permitted with conditions. Run a code check for an exact address to see the rules for that zone.
Ready to Research Cascade Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Cascade, Idaho, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Cascade, Idaho Sign Rules at a Glance
Cascade, Idaho regulates 12 sign types across 3 zoning districts. Resident Nameplate Signs are capped at 3 sq ft (Sec. 2-2-2(G)). Most commercial signs in Cascade require a permit.
Detailed Sign Ordinance Requirements for Cascade, Idaho
Sign Rules by Zoning District in Cascade (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Commercial Zone (C), Industrial Zone (I) | 8 | 20 ft | Max total for all wall signs: 200 sq. ft. (no one sign over 90 sq. ft.) | Not listed |
| R-II Zone, R-III Zone, RC Zone, A Zone | 1 | 4 ft | 16 sq. ft. (may be doubled for multi-face signs) | Not listed |
| General Regulations For All Zones | 5 | 6 ft for rigid material signs | 100 sq. ft. (general max). Rigid material: 16 sq. ft. and 6 ft height max, not fastened to ground. Wheeled (rigid) signs: 32 sq. ft. (may be doubled for multi-face signs) | Not listed |
Zone-by-Zone Sign Requirements in Cascade
Commercial Zone (C), Industrial Zone (I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground-Mounted Sign | 20 ft | 90 sq. ft. (may be doubled for multi-face signs) | Not listed | Must not project beyond a legal setback; not within 10 ft of other signs in right of way. | 2 per street frontage | On private property, not within 10 ft of another sign within any street right of way; must maintain clear vision area for traffic/pedestrian safety; must not project beyond a legal setback | Not listed | Unlock | 2-2-10 (A)-(G) |
| Wall Sign | Not listed | Max total for all wall signs: 200 sq. ft. (no one sign over 90 sq. ft.) | Not listed | No projection over public property or beyond legal setback greater than allowed in Uniform Sign Code. | Not listed | Attached to or erected against the wall of a building or structure, face parallel to wall, max 6 in from wall | Not listed | Unlock | 2-2-16 (A)-(E) |
| Roof Sign | Max 5 ft above the ridge line or parapet | 50 sq. ft. (may be doubled for multi-face signs) | Not listed | Not listed | Not listed | On or above the roof or parapet, not to exceed 5 ft above. | Not listed | Unlock | 2-2-14 (A)-(D) |
| Marquee Sign | Not listed | 200 sq. ft. without conditional use permit | Not listed | Not listed | Not listed | On, attached to, or constructed in a marquee | Not listed | Unlock | 2-2-11 (A)-(B) |
| Projecting Sign | Not listed | 16 sq. ft. per face | Not listed | Projection up to 3 ft or 1/3 sidewalk width | Not listed | Fastened at one end to edge of a wall; may project up to 3 ft or 1/3 the width of the sidewalk, whichever is less | Not listed | Unlock | 2-2-13 (A) |
| Hanging Sign | Not listed | 16 sq. ft. per face | Not listed | Not listed | Not listed | Both outer edges attached to supporting structure above; must clear sidewalks by at least 7 ft | Not listed | Unlock | 2-2-13 (A) |
| Portable Sign | Not listed | Sandwich board: 16 sq. ft. per face | Not listed | Not listed | 2 per lot frontage | On private property, where does not interfere with traffic visibility | Not listed | Unlock | 2-2-12, 2-2-4(C) |
| Canopy Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Part of an awning/canopy over a door, window, entrance, or outdoor service area | Not listed | Unlock | 2-2-9 |
R-II Zone, R-III Zone, RC Zone, A Zone
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground-Mounted Sign | 4 ft | 16 sq. ft. (may be doubled for multi-face signs) | Not listed | Must not project beyond a legal setback; not within 10 ft of other signs in right of way. | 2 per street frontage | On private property, not within 10 ft of another sign within any street right of way; must maintain clear vision area for traffic/pedestrian safety; must not project beyond a legal setback | Not listed | Unlock | 2-2-10(H) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Temporary Sign | 6 ft for rigid material signs | 100 sq. ft. (general max). Rigid material: 16 sq. ft. and 6 ft height max, not fastened to ground. Wheeled (rigid) signs: 32 sq. ft. (may be doubled for multi-face signs) | Not listed | Not listed | Not listed | On private property; cloth signs may project over public property/streets with permission and 20 ft min clearance; other temporary signs (not cloth) when 8 ft or more above ground may project max 6 in over public property. | Not listed | Unlock | 2-2-15 (A)-(E) |
| Portable Sign | Not listed | Sandwich board: 16 sq. ft. per face (Section 2-2-12) | Not listed | Not listed | 2 per lot frontage | On private property, where not interfering with traffic visibility | Not listed | Unlock | 2-2-12, 2-2-4(C) |
| Animated Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 2-2-6, 2-2-2-1 |
| Beacons | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 2-2-8 |
| Resident Nameplate Sign | Not listed | 3 sq. ft. | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 2-2-2(G) |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Cascade with a free PermitPal account.
Run a free code checkProhibited Signs in Cascade
- A sign may be erected, placed, established, painted, created, or maintained in the City only in conformance with the standards, procedures, exemptions, and other requirements of this Chapter.
- All signs not expressly permitted by this Chapter are prohibited.
- It is unlawful for any person to erect, construct, enlarge, alter, repair, remove, convert or demolish, equip, use or maintain any sign or sign structure in this jurisdiction contrary to or in violation of any of the provisions of this Chapter.
- No sign or sign structure shall be erected, constructed, altered, or maintained without a permit when one is required.
- Beacons are not permitted.
- Any nonconforming sign destroyed by fire, calamity, or general dilapidation to an extent of sixty percent (60%) may not be restored unless restored as a conforming sign.
- A nonconforming sign abandoned or discontinued for six (6) months or more cannot be reestablished and must comply with the current ordinance.
- Signs must not project over public property or beyond a legal setback except as permitted.
- No combustible materials other than approved plastics shall be used in the construction of electric signs.
Exempt Signs in Cascade
- The changing of the advertising copy or message on a painted or printed sign only; this does not apply to theater marquees, replaceable copy signs, or electric signs.
- Painting, repainting, or cleaning of an advertising structure, or the changing of the advertising copy or message thereon, does not require a permit unless a structural change is made.
- Temporary and portable signs do not require a sign permit.
- Canopy signs do not require a sign permit.
- Temporary signs such as banners, pennants, flags, or similar do not require sign permits.
Sign Plan & Submission Notes for Cascade
- The Building Official may require the filing of plans or other pertinent information with a sign permit application where such information is necessary to ensure compliance with the ordinance.
- A sign permit fee and a plan-checking fee shall be paid in accordance with the schedule established by the Council.
- Application for a sign permit must be made in writing on forms furnished by the City Clerk and may require filing of plans or information as requested by the Building Official.
- A conditional use permit (public hearing required) is required for animated signs or other uses otherwise prohibited by the ordinance but permitted with conditions.