Sign Regulations in Gooding, Idaho

Gooding, Idaho has specific sign regulations covering 15 sign types across 3 zoning districts. Regulated sign types include Window Sign, Temporary Sign, Political Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Sign Regulation Overview for Gooding, Idaho

Sample Sign Requirements in Gooding

Sign TypeMax HeightMax AreaSetback
Window Sign20% of window surface
Temporary Sign50 sq ft
Real Estate Sign6 sq ftAt least 10 feet from right-of-way

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for GoodingFull Coverage

Sign Types Covered

15

  • Window Sign
  • Temporary Sign
  • Political Sign
  • Illuminated Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

Sign height limits in Gooding vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Gooding, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Gooding, regulated sign types include Window Sign, Temporary Sign, Political Sign, Illuminated Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Gooding vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Gooding are regulated with specific requirements for brightness, animation, and message duration. Gooding has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Gooding Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Gooding, Idaho sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Gooding, Idaho Sign Rules at a Glance

Gooding, Idaho regulates 15 sign types across 3 zoning districts. Freestanding Sign (On-premises)s in the Commercial District, Manufacturing District zoning district are capped at 30 ft tall and 100 sq ft per display area, with a At least 10 ft from street right-of-way, at least 30 ft from any adjoining lot line setback (Sec. 11-13-6:E). Most commercial signs in Gooding require a permit.

Detailed Sign Ordinance Requirements for Gooding, Idaho

Sign Rules by Zoning District in Gooding (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones650 sq ft
Residential District750 sq ft
Commercial District, Manufacturing District530 ft600 sq ft (total); max 1200 sq ft per single off-premise sign

Zone-by-Zone Sign Requirements in Gooding

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Illuminated SignUnlock11-13-3:A, C
Projecting SignMay not project more than two feet (2') from face of building.Unlock11-13-3:D
Roof SignPermitted only if supporting structure is screened so the sign appears to be a continuation of the face of the building.Unlock11-13-3:E
Window Sign20% of window surfaceIn window of building, visible from public or private street or highway.Unlock11-13-3:H
Temporary Sign50 sq ftUnlock11-13-5:D
Political SignUnlock11-13-5:F

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Real Estate Sign6 sq ftAt least 10 feet from right-of-wayOn premises offered for sale/lease/rentUnlock11-13-5:A, 11-13-7:B
Unattached Nameplate4 sq ftUnlock11-13-5:B
Occupant Name/Address Sign2 sq ftUnlock11-13-5:C
Temporary Sign50 sq ftUnlock11-13-5:D
Political SignUnlock11-13-5:F
Bulletin Board (Institutions)15 sq ftAt least 10 ft from right-of-wayOn premises of institution (place of worship, library, museum, social club, society)Unlock11-13-6:A
Commercial Enterprise Sign12 sq ftOn premises; in district zoned residentialUnlock11-13-6:B

Commercial District, Manufacturing District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign (On-premises)100 sq ft1 per businessOn premises of businessUnlock11-13-6:C
Freestanding Sign (On-premises)30 ft100 sq ft per display areaAt least 10 ft from street right-of-way, at least 30 ft from any adjoining lot line1 per buildingOn premises, at least 10 ft from street right-of-way, at least 30 ft from any adjoining lot lineUnlock11-13-6:E
Off-premises Sign (Total for Location)20 ft above nearest elevated highway if intended to be seen from highway600 sq ft (total); max 1200 sq ft per single off-premise signNot in front of required setback; must conform to zone yard/height requirements; up to 20 ft above elevated highway if viewed from highway.2 per locationPermitted at a single location. Must conform to yard and height regulations except for viewing from elevated highway.Unlock11-13-6:D
On-premises Sign (General)Increase setback by 0.5 ft for every sq ft exceeding 50 sq ft, up to 100 ft setback.For every sq ft over 50 sq ft in sign area, increase setback by 0.5 ft, not exceeding 100 ft total setback.Unlock11-13-7:A
Window Sign20% of window surfaceUnlock11-13-3:H

Illumination rules, size formulas, and permit requirements for every sign type in Gooding are available with a free PermitPal account.

Start free

Prohibited Signs in Gooding

  • No illuminated sign or lighting device shall be directed or beamed upon a public thoroughfare, highway, sidewalk, or adjacent premises to cause glare or reflection that may constitute a traffic hazard or nuisance.
  • No sign shall employ any parts or elements which revolve, rotate, whirl, spin or otherwise make use of motion to attract attention.
  • All fittings and materials in electrically illuminated signs must comply with the local electric code.
  • No projecting sign shall project more than two feet from the front or face of a building.
  • No sign shall be placed on the roof of any building except where the supporting structure is screened so the sign appears to be a continuation of the face of the building.
  • No portable or temporary sign shall be placed on the front of a building or on any premises except as provided in the ordinance.
  • No sign or part thereof shall contain or consist of banners, posters, pennants, ribbons, streamers, spinners, or other similar moving devices. Such devices, as well as strings of lights, shall not be used for advertising or attracting attention unless part of a sign with a special permit.
  • No sign in the window of a building, visible from any public or private street or highway, shall occupy more than twenty percent of the window surface.
  • No sign of any classification shall be installed, erected, or attached in any way to a fire escape or any door or window giving access to any fire escape.
  • Any sign that is unsafe, in danger of falling, tattered, torn or in disrepair must be repaired or removed upon written notice from the Mayor or Chief of Police.
  • No sign shall be placed in any public right of way except publicly owned signs. Official signs guiding traffic and parking on private property without advertising matter are allowed.
  • Signs along interstate and primary highways must conform to Idaho State Transportation Department regulations.
  • No unauthorized sign, signal, marking or device that resembles or imitates a traffic control device, attempts to direct traffic, or hides/interferes with effectiveness of traffic control devices may be placed or maintained upon or in view of any highway.
  • No traffic sign or signal on any highway may bear commercial advertising.
  • No part of any sign may be installed, erected, or maintained in violation of this chapter.

Exempt Signs in Gooding

  • Signs erected and maintained pursuant to any governmental function or required by law, ordinance, or governmental regulation are not considered 'signs' under this chapter.
  • Official signs directing and guiding traffic and parking on private property that have no advertising matter are permitted on any property.
  • The posting of regular notices by public officers is exempt.
  • The distribution of newspapers by regular issue is exempt.
  • Merchants advertising their own business by the distribution of circulars is exempt.
  • The placement, as required by law, of wood, lettered, painted, metal or electric signs over, upon or in front of business buildings, offices, houses, etc., for advertising the name or business of any person occupying same, or the goods sold therein, or the signs of real estate firms advertising the property on which said signs are located for sale or rent, is exempt.

Sign Plan & Submission Notes for Gooding

  • Signs may require a building permit issued by the City Building Inspector after approval of the City Council or upon a recommendation for issuance of a building permit by the Mayor and City Council (see permitted signs section).
  • Special permitted signs may be allowed by special use permit issued by the Mayor and City Council.
  • Any other sign not specified may be permitted upon approval and issuance of a building permit by the Mayor and Council.
  • Variance or sign plan submission is not explicitly required in the ordinance text provided, but all signs must adhere to approval and permitting requirements as described.