Questions? Call us at (262) 218-2915

Sign Regulations in Rigby, Idaho

Rigby, Idaho has specific sign regulations covering 21 sign types across 4 zoning districts. Regulated sign types include Real Estate Sign, Temporary Sign, Illuminated Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rigby, Idaho

Sample Sign Requirements in Rigby

Sign TypeMax HeightMax AreaSetback
Window SignNot listedMax 20% of window surfaceNot listed
Real Estate SignNot listed6 sq. ft.Not less than 10' from right-of-way
Professional NameplateNot listed4 sq. ft.Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RigbyFull Coverage

Sign Types Covered

21

  • Real Estate Sign
  • Temporary Sign
  • Illuminated Sign
  • Projecting Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Rigby, the height limit for Freestanding On-Premises Sign in the Commercial District, Manufacturing District, Industrial District is 30 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rigby require a permit. From the submission notes on this page: There is no explicit mention of a 'master sign plan' or similar sign plan document requirement in the provided text; variances and administrative actions are the general method for approving exceptions. Run a code check for an exact address to see the permit requirements for that zone.

Rigby's sign code covers 21 sign types, including Real Estate Sign, Temporary Sign, Illuminated Sign, and Projecting Sign. Most commercial signs need a permit. The ordinance lists 3 exemptions. One of them: Publicly owned signs such as traffic-control signs and directional signs are permitted in public right of way. The full list is on this page.

In Rigby, Freestanding On-Premises Sign in the Commercial District, Manufacturing District, Industrial District must be set back 10 ft from right-of-way, 30 ft from adjoining lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Rigby's sign ordinance that cover digital, changing, or flashing signs: No illuminated sign or lighting device shall emit flashing, intermittent, rotating, or moving light or lights; illumination must be of constant intensity. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rigby Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rigby, Idaho, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Rigby, Idaho Sign Rules at a Glance

Rigby, Idaho regulates 21 sign types across 4 zoning districts. Freestanding On-Premises Signs in the Commercial District, Manufacturing District, Industrial District are capped at 30 ft tall and 100 sq ft per display area, set back 10 ft from right-of-way, 30 ft from adjoining lot line. Most commercial signs in Rigby require a permit.

Detailed Sign Ordinance Requirements for Rigby, Idaho

Sign Rules by Zoning District in Rigby (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones5Not listedMax 20% of window surfaceNot listed
Residential District10Not listed50 sq. ft.Not listed
Commercial District, Manufacturing District, Industrial District730 ftTotal for two signs: 600 sq ft. Max single sign: 1,200 sq ftNot listed
Downtown Business District1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Rigby(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Illuminated SignNot listedNot listedNot listedNot listedNot listedAll zones; not to cause glare/reflection on thoroughfares or adjacent premisesNot listedUnlock10-12-3 A, C
Projecting SignNot listedNot listedNot listedNot listedNot listedFrom face of building not more than 2', except Downtown Business District allows 4'Not listedUnlock10-12-3 D
Roof SignNot listedNot listedNot listedNot listedNot listedOn roof, only if sign structure is screened so sign appears to be a continuation of building faceNot listedUnlock10-12-3 E
Window SignNot listedMax 20% of window surfaceNot listedNot listedNot listedWindow, visible from public/private street or highwayNot listedUnlock10-12-3 H
General Sign Construction RequirementsNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock10-12-3 I, J, K

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate SignNot listed6 sq. ft.Not listedNot less than 10' from right-of-wayNot listedPremises for sale/leaseNot listedUnlock10-12-5 A
Professional NameplateNot listed4 sq. ft.Not listedNot listedNot listedOn premisesNot listedUnlock10-12-5 B
Occupant SignNot listed2 sq. ft.Not listedNot listedNot listedIdentifies occupantNot listedUnlock10-12-5 C
Temporary SignNot listed50 sq. ft.Not listedNot listedNot listedAnnouncing public or institutional event/erection/builders/etc.Not listedUnlock10-12-5 D
Wall Sign (Nonconforming Use)Not listed12 sq. ft.Not listedNot listedNot listedOn-premises of nonconforming useNot listedUnlock10-12-5 E
Institutional Bulletin BoardNot listed15 sq. ft.Not listedNot less than 10' from right-of-way; not within 10' of side/rear lot lineNot listedOn premises of places of worship, libraries, museums, social clubs, societiesNot listedUnlock10-12-6 A
Residential Identification SignNot listedUp to 8 sq ftNot listedNot listed1 per principal useIdentifies residential use of lot; on premisesNot listedUnlock10-12-9
Accessory Commercial Use SignNot listed12 sq ftNot listedNot listed1 per accessory useIdentifies accessory commercial use; on premisesNot listedUnlock10-12-9

Commercial District, Manufacturing District, Industrial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ftNot listedNot listed1 per businessOn-premises, single businessNot listedUnlock10-12-6 C
Off-Premises Sign (Group Location)20 ft above nearest roadway if meant for elevated highway viewTotal for two signs: 600 sq ft. Max single sign: 1,200 sq ftNot listedSame as district yard/height; special: may be up to 20 ft above roadway if near elevated highway; cannot be in front of setback line2 per group locationPermitted at a single location in the districtNot listedUnlock10-12-6 D
Off-Premises Wall SignNot listedNot listedNot listedNot listedNot listedOn wallNot listedUnlock10-12-6 D
Freestanding On-Premises Sign30 ft100 sq ft per display areaNot listed10 ft from ROW, 30 ft from adjoining lot line1 per buildingNo closer than 10' from any street right-of-way line and 30' from any adjoining lot lineNot listedUnlock10-12-6 E
Temporary SignNot listed50 sq. ft.Not listedNot listedNot listedAnnouncing public/institutional event/erection/builders/etc.Not listedUnlock10-12-5 D
Real Estate SignNot listed12 sq. ft.Not listedNot listedNot listedPremises for sale/leaseNot listedUnlock10-12-5 A, 10-12-9
Institutional Bulletin Board (Commercial/Manufacturing/Industrial)Not listed15 sq ftNot listedNot listedNot listedOn premises of qualifying institutionsNot listedUnlock10-12-6 A

PermitPal covers all 4 zoning districts in Rigby. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rigby

  • No illuminated sign or lighting device shall emit flashing, intermittent, rotating, or moving light or lights; illumination must be of constant intensity.
  • No illuminated sign or lighting device shall be placed or directed to permit glare or reflection that may constitute a traffic hazard or nuisance on a public thoroughfare, highway, sidewalk, or adjacent premises.
  • No sign shall employ any parts or elements that revolve, rotate, whirl, spin, or otherwise make use of motion to attract attention (with the exception of public service function signs indicating time, temperature, stock market quotations, or similar services).
  • All wiring, fittings, and materials used in operation of electrically illuminated signs must comply with the local electrical code.
  • No projecting sign shall be erected or maintained more than two feet from the face of a building (or four feet in the Downtown Business District).
  • Projecting signs are generally not encouraged except in the Downtown Business District.
  • No sign shall be placed on the roof of any building, except for signs with supporting structures screened as a continuation of the building's face.
  • No portable or temporary sign shall be placed on the front or face of a building or on any premises, except as provided in the ordinance.
  • No sign or part thereof shall contain or consist of banners, posters, pennants, ribbons, streamers, spinners, or other similar moving devices for advertising or attention-attracting purposes. Strings of lights are also prohibited when not part of a sign.
  • No window sign visible from any public or private street or highway shall occupy more than 20% of window surface.
  • No sign of any classification shall be installed, erected, or attached to a fire escape or any door or window giving access to a fire escape.
  • All signs must be plainly marked with the name of the person, firm, or corporation responsible for maintenance.
  • Unsafe or dangerously positioned signs must be repaired or removed by the owner or maintainer upon written notice from the Administrator.
  • No sign shall be placed in any public right of way except publicly owned signs (e.g., traffic-control and directional signs).
  • Signs along interstate and primary highways must conform to Idaho State Transportation Department regulations.

Exempt Signs in Rigby

  • Signs erected and maintained pursuant to and in discharge of any governmental function, or required by any law, ordinance, or governmental regulation, are excluded from the definition of 'sign' for this chapter.
  • Publicly owned signs such as traffic-control signs and directional signs are permitted in public right of way.
  • Signs directing and guiding traffic and parking on private property, provided they bear no advertising matter, are permitted.

Sign Plan & Submission Notes for Rigby

  • Signs exceeding specific requirements for special permitted signs (Section 10-12-6) require specific approval of the Planning Commission via variance or other administrative action.
  • There is no explicit mention of a 'master sign plan' or similar sign plan document requirement in the provided text; variances and administrative actions are the general method for approving exceptions.