Questions? Call us at (262) 218-2915

Sign Regulations in Des Plaines, Illinois

Des Plaines, Illinois has specific sign regulations covering 24 sign types across 3 zoning districts. Regulated sign types include Exempt Signs, Construction Related and Available Space Signs (Residential), Seasonal Retail Sign, Temporary (Residential). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Des Plaines, Illinois

Sample Sign Requirements in Des Plaines

Sign TypeMax HeightMax AreaSetback
Exempt SignsSee 12-11-3G (varies by sign type)See 12-11-3G (varies by sign type)Not listed
Construction Related and Available Space Signs (Residential)6 ft64 sq ftNot listed
Seasonal Retail Sign, Temporary (Residential)6 ft64 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Des PlainesFull Coverage

Sign Types Covered

24

  • Exempt Signs
  • Construction Related and Available Space Signs (Residential)
  • Seasonal Retail Sign, Temporary (Residential)
  • Monument Sign - Entrance
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Des Plaines, the height limit for Monument Sign - Entrance in the Residential Districts and other zoning districts is 5 ft (Sec. 12-11-6A). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Des Plaines require a permit. From the submission notes on this page: Major changes to an existing localized alternative sign regulation plan (as defined) require submission, approval, and recordation of a new sign regulation plan. Run a code check for an exact address to see the permit requirements for that zone.

Des Plaines's sign code covers 24 sign types, including Exempt Signs, Construction Related and Available Space Signs (Residential), Seasonal Retail Sign, Temporary (Residential), and Monument Sign - Entrance. Most commercial signs need a permit. The ordinance lists 16 exemptions. One of them: Address signs with numbers not exceeding two (2) square feet in area. The full list is on this page.

In Des Plaines, Pole Sign (Lots >75', >120', >300' Street Frontage, etc.) in the Commercial Districts and other zoning districts must be set back 5' (Sec. 12-11-6B). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Des Plaines's sign ordinance that cover digital, changing, or flashing signs: Plans prepared by a licensed structural engineer must be submitted as part of the permit application for electronic message board billboards. Electronic message boards and billboards may require conditional use approval and submittal of specific plans depending on zoning and the nature of the sign. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Des Plaines Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Des Plaines, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Des Plaines, Illinois Sign Rules at a Glance

Des Plaines, Illinois regulates 24 sign types across 3 zoning districts. Monument Signs - Entrance in the Residential Districts and other zoning districts are capped at 5 ft tall and 65 sq ft (Sec. 12-11-6A). Most commercial signs in Des Plaines require a permit.

Detailed Sign Ordinance Requirements for Des Plaines, Illinois

Sign Rules by Zoning District in Des Plaines (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts, MH-1 Mobile Home Park District (MH-1), R-1 Residential (R-1), R-2 Residential (R-2), R-3 Residential (R-3)5See 12-11-3G (varies by sign type)65 sq ftNot listed
Commercial Districts, Manufacturing Districts, I-1 Institutional District (I-1), C-1 Neighborhood Shopping District (C-1), C-2 Limited Office Commercial District (C-2), C-3 General Commercial District (C-3), C-4 Regional Shopping District (C-4), C-5 Central Business District (C-5), C-6 Casino District (C-6), M-1 Limited Manufacturing (M-1), M-2 General Manufacturing (M-2), M-3 Special Manufacturing (M-3)1999 ft from base OR 65 ft from surface of nearest paved lane1200 sq ft per face, 2400 sq ft per double sided sign (C-1, C-2, C-3, C-6, M-1, M-2, I-1); In C-6: up to 3 faces: two at 1200 sq ft, one at 600 sq ft, not to exceed 3000 sq ft totalNot listed
General Regulations For All Zones1Varies by sign typeVaries by sign typeNot listed

Zone-by-Zone Sign Requirements in Des Plaines

Residential Districts, MH-1 Mobile Home Park District (MH-1), R-1 Residential (R-1), R-2 Residential (R-2), R-3 Residential (R-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Exempt SignsSee 12-11-3G (varies by sign type)See 12-11-3G (varies by sign type)Not listedNot listedNot listedNot listedNot listedUnlock12-11-3G
Construction Related and Available Space Signs (Residential)6 ft64 sq ftNot listedNot listed2 (if criteria met), else 1On property of new development/multiple unit property (>25 units)Not listedUnlock12-11-6A, 12-11-5F
Seasonal Retail Sign, Temporary (Residential)6 ft64 sq ftNot listedNot listed1Per approved seasonal retail sales licenseNot listedUnlock12-11-6A, 12-11-5F
Monument Sign - Entrance5 ft65 sq ftNot listedNot listed1Entrance to single-family residential developmentsNot listedUnlock12-11-6A
Monument Sign - Identification5 ft65 sq ftNot listedNot listed1On-site at places of worship, multi-family buildings/complexesNot listedUnlock12-11-6A

Commercial Districts, Manufacturing Districts, I-1 Institutional District (I-1), C-1 Neighborhood Shopping District (C-1), C-2 Limited Office Commercial District (C-2), C-3 General Commercial District (C-3), C-4 Regional Shopping District (C-4), C-5 Central Business District (C-5), C-6 Casino District (C-6), M-1 Limited Manufacturing (M-1), M-2 General Manufacturing (M-2), M-3 Special Manufacturing (M-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Billboard - General Regulations99 ft from base OR 65 ft from surface of nearest paved lane1200 sq ft per face, 2400 sq ft per double sided sign (C-1, C-2, C-3, C-6, M-1, M-2, I-1); In C-6: up to 3 faces: two at 1200 sq ft, one at 600 sq ft, not to exceed 3000 sq ft totalNot listedAs required by Illinois ActVaries: max 1 in C-6, max 13 citywide elsewhereWithin 660 feet of I-90/I-294 toll roadsNot listedUnlock12-11-6B
Drive-Through Menu Board Sign6 ft60 sq ft (combined, per ordering point)Not listedNot listed2 per ordering pointAdjacent or leading up to each ordering pointNot listedUnlock12-11-6B
Electronic Message Board BillboardAs underlying billboard regulationup to 1200 sq ft (per face)Not listedAs billboardSee billboard max.Faces I-90/I-294 only; screened from residential; minimum separations as for billboardsNot listedUnlock12-11-6B
Electronic Message Board (Non-billboard)Not listedUp to 50% of sign area (general); up to 100% of menu board; up to 6 sq ft for EV charging portNot listed250' from residential zones (except I-1)1 per lotMonument or pole sign, incorporated or embedded in EV port/menu boardNot listedUnlock12-11-6B
Marquee Sign30 ft; minimum ground clearance 8 ftFront face: 300 sq ft, Side face: 150 sq ftNot listedAt least 1' from curb if in ROW1 per theaterAbove main customer entrance of commercial theatre (C-3/C-5 only)Not listedUnlock12-11-6B
Monument Sign (Lots >75', >120', >300' Street Frontage, etc.)5 ft (up to 10 ft with additional setback, depending on frontage/lot size)See details (80 to 120 sq ft for single signs, up to 200 or 350 for multiple signs/large lots)Not listedSee bonus; otherwise, 5' minimum (per Section 12-11-5.B)1-3 (see criteria)Frontage along street/highway (certain lot sizes only)Not listedUnlock12-11-6B
Pole Sign (Lots >75', >120', >300' Street Frontage, etc.)20' base, 28' or 35' with setback bonus (1 ft added height per 3' extra setback, max 28'/35')75-110 sq ft (single), max 200 or 550 sq ft all signs large lotsNot listed5' (Section 12-11-5.A)1-3 depending on frontage/lot sizeFrontage along street/highway (certain lot sizes only)Not listedUnlock12-11-6B
Portable A-Frame Sign3 ft6 sq ft per face, 2 facesNot listed3' from curb if in ROW1 per business/tenantWithin 15' of main customer entrance, within business tenant frontage (C-3, C-4, C-5 only)Not listedUnlock12-11-6B, 12-11-5I

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Exempt SignsVaries by sign typeVaries by sign typeNot listedNot listedNot listedNot listedNot listedUnlock12-11-3G

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Des Plaines with a free PermitPal account.

Run a free code check

Prohibited Signs in Des Plaines

  • Signs which move or give the appearance of movement, including, but not limited to, signs which flutter, undulate, swing, rotate, oscillate or otherwise move by natural or artificial means (except for permitted temporary signs, time and temperature signs, and regulated electronic message boards).
  • Roof signs, except for signs painted on flat roofs of an owner-occupied building located in the M-2 General Manufacturing District.
  • Off premises signs, except as provided for in this chapter; noncommercial off premises signs are permitted subject to any applicable size, height or similar restrictions provided elsewhere.
  • Signs which imitate traffic signs, including, but not limited to, those incorporating the words 'Stop', 'Danger', 'Warning', 'Caution', or 'Go Slow', unless such language is part of a business name (accessory parking lot signs excluded).
  • Portable or wheeled signs, except for A-frame signs as otherwise permitted.
  • Signs placed on parked vehicles or trailers where the apparent purpose is to advertise a product or to direct the public to a business or activity located on or off the same premises.
  • Inflatable images such as balloons.
  • Marquees, except where specifically permitted.
  • No sign shall be erected or maintained at the intersection of any streets so as to obstruct the free and clear vision of a driver or pedestrian.
  • No sign shall be erected or maintained so as to prevent free ingress or egress from any door, window, or fire escape, or be attached to a standpipe or fire escape.
  • No person shall permit, maintain, or display any sign painted directly on an exterior wall, fascia or parapet of a building, fence, or chimney except for existing signs advertising businesses on the same premises, which must receive regular maintenance.
  • No sign shall violate the Illinois highway advertising control act of 1971, as amended; signs controlled by the act shall be in compliance therewith and not exceed thirty five feet (35') above ground level.
  • No person shall place, paste, print, or affix, in any manner, a handbill, sign, poster, advertisement or notice of any kind in any public right of way on any trees, light standards, telephone poles or other supporting structure.
  • Sign illumination shall not be so designed, located, shielded, or directed as to cast direct light upon adjacent property or streets.
  • Signs located on a lot abutting a residential district or within one hundred feet (100') of any residentially zoned area shall be designed, located, shielded, and directed to prevent casting of direct light upon adjacent properties or streets.
  • All signs must meet construction and design standards set forth in the city's building code.
  • All signs and premises shall be maintained in clean, sanitary, and inoffensive condition, and free of obnoxious substances, rubbish, and weeds.
  • Every sign must be maintained in good structural condition and painted at least every two years (unless galvanized or rust resistant).
  • Pole and monument signs must have landscaping (minimum three feet in width on each side) at base.
  • All signs and sign structures must be designed and constructed to withstand wind pressures and dead loads according to the city's building code.
  • Each sign erected or remodeled must bear a legible identification plate, stating the name of the person responsible for construction and erection. Electrical signs must be marked with input amperes at full load.

Exempt Signs in Des Plaines

  • Public service signs used for safety purposes relative to repair or maintenance of streets, sidewalks, or utilities in a public right of way not exceeding two (2) square feet in area.
  • Address signs with numbers not exceeding two (2) square feet in area.
  • Governmental signs and public notices erected or required by governmental bodies, or authorized for a public purpose by any law, statute, or ordinance, or to promote the public good. Must be on public property or private property with owner's consent.
  • Public information signs identifying telephone, restrooms, and similar facilities, provided no advertising matter accompanies the sign.
  • Flags are exempt; flagpoles limited to 20 feet in height in residential districts and 40 feet in nonresidential districts; flag size proportional to pole.
  • Memorial plaques and cornerstones not exceeding two (2) square feet when permanently affixed.
  • Notice and bulletin boards for public, charitable, religious, or similar institutions not exceeding sixteen (16) square feet and located on the same premises.
  • Time and temperature signs (computer-generated messages such as time, temperature, or date) not exceeding eighteen (18) square feet.
  • Historical identification signs for officially designated historical sites not exceeding twelve (12) square feet.
  • Real estate signs advertising sale, lease, or rent of property, subject to size, height, and placement limitations.
  • Real estate open house signs subject to number, size, timing, location, and identification requirements.
  • Miscellaneous informational matter on gasoline pumps, newspaper vending boxes, ATMs, vending machines, or on/adjacent to entry doors (e.g., 'Push', 'Pull', hours of operation, credit cards accepted, etc.).
  • Temporary window signs (except in residential districts, two per window, total area not to exceed 50% of window area).
  • Temporary personal message, celebration, special event, and garage sale signs on residential property, provided they meet size, number, illumination, height, and duration restrictions.
  • Directional signs (up to three on certain lots), subject to size, height, location, illumination, and landscaping standards.
  • Employment opportunity signs advertising available positions at a business, located on same zoning lot, limited to one per business, not exceeding four feet in height and sixteen square feet in area.

Sign Plan & Submission Notes for Des Plaines

  • A sign permit is required for all signs except those specifically exempt under subsection 12-11-3G; exempt signs must meet all other requirements of the chapter and any limitations set forth.
  • Localized alternative sign regulation plans may be established for commercial shopping centers and multi-building commercial or institutional developments, subject to review and approval by the Planning and Zoning Board under conditional use procedures (section 12-11-8). Approval of a localized alternative sign regulation plan requires a sign plan that becomes binding on all real property and premises in the plan area.
  • Major changes to an existing localized alternative sign regulation plan (as defined) require submission, approval, and recordation of a new sign regulation plan.
  • Plans prepared by a licensed structural engineer must be submitted as part of the permit application for electronic message board billboards.
  • Variation from the strict application of sign provisions may be sought via the procedures for variance (section 12-11-7), with review by the Planning and Zoning Board.
  • Electronic message boards and billboards may require conditional use approval and submittal of specific plans depending on zoning and the nature of the sign.