Questions? Call us at (262) 218-2915

Sign Regulations in Flora, Illinois

Flora, Illinois has specific sign regulations covering 21 sign types across 5 zoning districts. Regulated sign types include Temporary Construction Sign, Temporary Real Estate Sign, Window Promotional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Flora, Illinois

Sample Sign Requirements in Flora

Sign TypeMax HeightMax AreaSetback
Flag Sign30 feet for all districts (except US flag & Illinois State flag up to 50 feet)6 feet x 10 feet (60 sq ft) for official or organizational, 10 feet x 15 feet (150 sq ft) for US/Illinois State flagNot listed
Political SignNot listed32 sq ft per side, 2 sides permittedNot listed
Special Event/Temporary Sign6 feet if freestanding100 sq ft per side, 2 sides permitted20 ft from curb for freestanding unless special condition applies

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for FloraFull Coverage

Sign Types Covered

21

  • Temporary Construction Sign
  • Temporary Real Estate Sign
  • Window Promotional Sign
  • Architectural Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Flora, the height limit for Freestanding Sign in the Commercial District (C-1, C-2) is 32 feet (Sec. 10-4-10(A)). The height limit for Architectural (Wall/Canopy/Awning/Projecting) Sign in the Commercial District (C-1, C-2) is 32 ft or bldg façade, whichever is greater (Sec. 10-4-10(B)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Flora require a permit. From the submission notes on this page: If the application for a sign permit would be denied due to regulations, an applicant may petition the zoning board for a variance; petitions are then reviewed by the city council. Run a code check for an exact address to see the permit requirements for that zone.

Flora's sign code covers 21 sign types, including Temporary Construction Sign, Temporary Real Estate Sign, Window Promotional Sign, and Architectural Sign. Most commercial signs need a permit. The ordinance lists 19 exemptions. One of them: Traffic signs authorized by the city or applicable agencies. The full list is on this page.

In Flora, Freestanding Sign in the Commercial District (C-1, C-2) must be set back 20 ft from curb or min 8 ft ground clearance (Sec. 10-4-10(A)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Flora's sign ordinance that cover digital, changing, or flashing signs: Flashing signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Flora Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Flora, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Flora, Illinois Sign Rules at a Glance

Flora, Illinois regulates 21 sign types across 5 zoning districts. Freestanding Signs in the Commercial District (C-1, C-2) are capped at 32 feet tall, set back 20 ft from curb or min 8 ft ground clearance (Sec. 10-4-10(A)). Most commercial signs in Flora require a permit.

Detailed Sign Ordinance Requirements for Flora, Illinois

Sign Rules by Zoning District in Flora (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones730 feet for all districts (except US flag & Illinois State flag up to 50 feet)100 sq ft per side, 2 sides permittedNot listed
Residential District (R-1, R-2, R-3, R-4, MF-1, MH)1112 feet or max building façade height, whichever is less50 sq ftNot listed
Agricultural District (A-1, A-2)532 feetBasic: 150 sq ft per side (may increase up to 400 sq ft per side per setback formula in 10-4-10(A)(3a): 6 sq ft/side for each 10' sign is set back from nearest street centerline)Not listed
Commercial District (C-1, C-2)632 feetBasic: 150 sq ft/side; may increase up to 400 sq ft/side per formula (6 sq ft per 10' sign is set back from nearest street centerline)Not listed
Industrial District (I-1, I-2)632 feetBasic: 150 sq ft per side; may increase to 400 sq ft/side per formula (as C-1/C-2)Not listed

Zone-by-Zone Sign Requirements in Flora(sample of 3 of 5 zones)

Residential District (R-1, R-2, R-3, R-4, MF-1, MH)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Flush Wall Sign (Single-Unit Dwelling)Not listed1 sq ft per dwelling unitNot listedNot listedOne per dwellingOn private property; must be flush wallNot listedUnlock10-4-9(C)1, (D), 10-4-5(D)5
Flush Wall Sign (Home Occupation)Not listed2 sq ftNot listedNot listedOne per home occupationFlush wall on private propertyNot listedUnlock10-4-9(C)2, (D), 10-4-5(D)5
Flush Wall Sign (Bed and Breakfast/Inn)Not listed12 sq ftNot listedNot listedNot listedOn private propertyNot listedUnlock10-4-9(C)5, (D)
Flush Wall Sign (School/Govt/Church/Public Auditorium)Not listed50 sq ftNot listedNot listedNot listedOn private propertyNot listedUnlock10-4-9(C)3, (D)
Freestanding Sign (Other Uses)12 feet or max building façade height, whichever is lessSee use type (generally follows wall sign area rules as above)Not listed20 ft from curb, or at least 8 ft clearance from groundOne per street frontageMinimum 20 ft setback from street curb line or min 8 ft clearance to groundNot listedUnlock10-4-9(A)(2),(G), (B)(1)
Architectural Sign12 feet or max building façade height, whichever is greaterSee use type (generally follows wall sign area rules as above)Not listedNot listedNo limit (subject to sign area)Not listedNot listedUnlock10-4-9(B)(2), (F)(2)
Real Estate Sign (Residential Use)Not listed6 sq ft per side, 2 sides maxNot listedNot listedOne per lot frontageOne per lot frontageNot listedUnlock10-4-11(A)(3)
Temporary Construction SignNot listed6 sq ft per side, 2 sides maxNot listedNot listedOne per street frontageOne per street frontageNot listedUnlock10-4-11(B)(3)

Commercial District (C-1, C-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign32 feetBasic: 150 sq ft/side; may increase up to 400 sq ft/side per formula (6 sq ft per 10' sign is set back from nearest street centerline)Not listed20 ft from curb or min 8 ft ground clearanceOne per frontage; second permitted if over 300', must be 50' apartOn private property; minimum 20 ft setback from curb or 8 ft ground clearanceNot listedUnlock10-4-10(A)
Architectural (Wall/Canopy/Awning/Projecting) Sign32 ft or bldg façade, whichever is greaterVaries per formula/scheduleNot listedNo closer than 3 ft to street/alley curb line (vertical projection); max 6 ft projectionNo limit (within sign area)Any location on private property, not closer than 3 ft to street/alley curb line; projects max 6 ft from façade (parallel for certain awnings); 8 ft clearance over sidewalk/ROWNot listedUnlock10-4-10(B)
Window Promotional SignNot listedNot listedNot listedNot listedNot listedOn windowsNot listedUnlock10-4-11(L), 10-4-5(D)3
Temporary Real Estate SignNot listed32 sq ft per side, 2 sidesNot listed20 ft from curb/8 ft clearance to ground for freestandingOne per lot frontageOne per lot frontageNot listedUnlock10-4-11(A)(2)
Temporary Construction SignNot listed32 sq ft per side, 2 sidesNot listedNot listedOne per frontageOne per frontage unless >1 block projectNot listedUnlock10-4-11(B)(2)
Window Promotional SignNot listedNot listedNot listedNot listedNot listedOn windowsNot listedUnlock10-4-11(L), 10-4-5(D)3

Industrial District (I-1, I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign32 feetBasic: 150 sq ft per side; may increase to 400 sq ft/side per formula (as C-1/C-2)Not listed20 ft setback or 8 ft ground clearanceOne per frontage; second permitted if over 300', must be 50' apartOn private property, 20 ft setback or 8 ft ground clearanceNot listedUnlock10-4-10(A)
Architectural Sign32 ft or bldg façade height, whichever greaterSee formulaNot listed3 ft from curb line, 8 ft clearance for projecting signsNo limit by areaOn private property, not closer than 3 ft to curb line; max 6 ft projection; min 8 ft clearance for projecting/suspended signsNot listedUnlock10-4-10(B)
Industrial Park ID Sign25 feet125 sq ft per side, one per park entranceNot listedNot listedOne per park entranceAt industrial park entrance; must not impede driver vision; approval by officialNot listedUnlock10-4-11(I)
Temporary Real Estate SignNot listed100 sq ft per side, 2 sidesNot listed8 ft ground clearance or 20 ft setbackOne per 800' frontageOne per 800' frontageNot listedUnlock10-4-11(A)(1)
Temporary Construction SignNot listed32 sq ft per side, 2 sidesNot listedNot listedOne per frontageOne per frontage unless >1 block projectNot listedUnlock10-4-11(B)(2)
Window Promotional SignNot listedNot listedNot listedNot listedNot listedOn windowsNot listedUnlock10-4-11(L), 10-4-5(D)3

PermitPal covers all 5 zoning districts in Flora. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Flora

  • No sign shall be permitted in any zoning district except in accordance with the provisions of this chapter.
  • No sign may be erected on the roof of any structure or be erected on the building façade so that any portion of the sign exceeds the height of the façade.
  • No part of any freestanding or building sign may be erected so as to suspend over or otherwise encroach upon any public right of way (unless specific clearance requirements or permissions are met).
  • Off-premises signs are prohibited unless approved by the Zoning Board.
  • Pennants, propellers, paddle wheels, streamers, spinners, or other attraction devices designed to be set in motion by the wind are prohibited except as permitted in the Special Signs section.
  • Festoon lights are prohibited.
  • Moving signs are prohibited except as permitted in designated sections.
  • Flashing signs are prohibited.
  • Bare bulb illumination exceeding 25 watts per bulb is prohibited.
  • Portable signs are prohibited except as permitted in designated sections.
  • No sign shall be subject to any limitation based on the content of the message on such sign.
  • No sign or flagpole shall be erected or installed without first obtaining a permit (with limited exemptions).
  • No signs shall be placed on city owned or maintained real estate without the permission of the city council except traffic control or designation signs.
  • Illumination of signs shall not adversely affect neighboring premises, vehicular vision, or shine into residential structures.
  • Signs that are not securely affixed, not in good repair, are unclean, faded, related to a closed business/product, or create a hazardous condition may be ordered to be repaired or removed by the administrative official.
  • Any sign prohibited under this chapter, even if nonconforming, must be removed or brought into conformance within 30 days of notice (with right of appeal).
  • No political sign may be attached to utility poles, trees on public right of way, street light poles, street or traffic signs, or fire hydrants.

Exempt Signs in Flora

  • Flags of nations, organizations of nations, states, cities, fraternal, religious, and civic organizations.
  • Merchandise, pictures, models or products, or services incorporated in a window display.
  • Signs not exceeding one square foot in area bearing only property numbers, post office box numbers, names of occupants, or other identification of premises not having commercial connotations.
  • Legal notices, informational, or directional signs erected or required by governmental bodies.
  • National, state, religious, fraternal, professional, and civic symbols or crests.
  • Decorations clearly incidental and customarily and commonly associated with any national, local or religious holiday displayed for no more than sixty (60) consecutive days or sixty (60) days in any one year.
  • Signs painted on or magnetically affixed to vehicles that do not contain changeable letters or copy; and signs otherwise attached to vehicles that do not exceed five (5) square feet in area and do not contain changeable letters or copy.
  • Residential signs not exceeding one square foot in area customarily associated with residential use, not of commercial nature (except permitted home occupations).
  • Governmental signs directed or authorized by governmental bodies.
  • The United States flag, the Illinois state flag, and any local government flag (business or other flags are not exempt from sign area limits).
  • Holiday season decorations and signage; historic plaques, cornerstone and commemorative plaques; integral, decorative or architectural features of buildings or works of art without commercial messaging/moving parts.
  • Seasonal and festive pennants (limited to noncommercial content up to two sq ft or 10% of pennant).
  • On-premises directional signs that do not exceed six sq ft per space or three feet in height and do not interfere with visibility.
  • Signs painted or permanently attached to licensed and operative motor vehicles.
  • Noncommercial signs expressing constitutionally protected speech; church, school and college bulletin boards not exceeding 20 sq ft; periodic event and community carnival/event signs.
  • Traffic signs authorized by the city or applicable agencies.
  • Warning, no trespassing, no hunting, and other similar signs.
  • Community event signs (up to 30 days before, 7 days after the event, subject to certain restrictions).
  • Real estate signs (up to 9 sq ft in residential and 32 sq ft in commercial/industrial, placed on property for sale or lease, not in public right-of-way or boulevard).

Sign Plan & Submission Notes for Flora

  • All new signs, movement of existing signs, enlargement, replacement with new material, substantial repainting (50%+), business name/ownership changes, and temporary signs require a permit.
  • The business owner is responsible for securing the permit.
  • The permit must be displayed on the premises at the time of erection and for seven days after.
  • Maintenance of existing sign areas as defined (less than 50% of surface area and no substantial alterations) does not require a permit.
  • If the application for a sign permit would be denied due to regulations, an applicant may petition the zoning board for a variance; petitions are then reviewed by the city council.
  • Any individual desiring to place an off-premises sign must petition the zoning board for approval. The zoning board's decision is subject to city council approval.
  • In the event of a dispute or need for interpretation regarding sign regulations, an appeal may be made to the zoning board, with final approval/disapproval by the city council.
  • Nonconforming signs must be registered with the building official; significant alteration or repair may void nonconforming status.
  • All components of a sign must comply with the International Building Code as adopted by the city.
  • Some locations (e.g. subdivision entrance or identification signs, industrial park identification signs) require approval of the administrative official for sign placement.