Questions? Call us at (262) 218-2915

Sign Regulations in Hainesville, Illinois

Hainesville, Illinois has specific sign regulations covering 12 sign types across 3 zoning districts. Regulated sign types include Wall Sign, Single-Tenant Monument Sign, On-Site Traffic Directional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hainesville, Illinois

Sample Sign Requirements in Hainesville

Sign TypeMax HeightMax AreaSetback
Wall SignNot above highest roofline or top of parapet wall or mansard roof5% of wall face areaNot listed
Single-Tenant Monument Sign5 ft15 sq ftMin 5 ft from property lines, ROWs, easements; not in vision triangle
On-Site Traffic Directional Sign4 ft6 sq ftMin 5 ft from property lines, ROWs, easements; not in vision triangle

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HainesvilleFull Coverage

Sign Types Covered

12

  • Wall Sign
  • Single-Tenant Monument Sign
  • On-Site Traffic Directional Sign
  • Wall Mounted Banner Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hainesville

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Hainesville, the height limit for Multi-Tenant Monument Sign in the B-1, ORD zoning districts is 14 ft (Sec. 17.06.050.C). Maximum sign heights range from 5 ft to 14 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hainesville require a permit. From the submission notes on this page: Permitted sign types (those marked 'P' in Table 17.06.040) require the issuance of a sign permit as detailed in Section 17.08.020.D (not included in the provided text), which may constitute a sign plan or application. Run a code check for an exact address to see the permit requirements for that zone.

Hainesville's sign code covers 12 sign types, including Wall Sign, Single-Tenant Monument Sign, On-Site Traffic Directional Sign, and Wall Mounted Banner Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Window signs are allowed in all districts (marked 'A' in Table 17.06.040) and do not require a permit. The full list is on this page.

In Hainesville, Single-Tenant Monument Sign in the R-1, R-2, AG zoning districts must be set back at least 5 ft from property lines, ROWs, easements (Sec. 17.06.050.B). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Hainesville's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Hainesville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hainesville, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Hainesville, Illinois Sign Rules at a Glance

Hainesville, Illinois regulates 12 sign types across 3 zoning districts. Yard Signs in the R-1, R-2, AG zoning districts are capped at 3.5 ft tall and 4 sq ft (Sec. 17.06.060.D). Most commercial signs in Hainesville require a permit.

Detailed Sign Ordinance Requirements for Hainesville, Illinois

Sign Rules by Zoning District in Hainesville (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
R-1, R-2, AG65 ft25% of window areaNot listed
B-1, ORD914 ft60 sq ftNot listed
General Regulations For All Zones2Not listedSee formulaNot listed

Zone-by-Zone Sign Requirements in Hainesville

R-1, R-2, AG

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot above highest roofline or top of parapet wall or mansard roof5% of wall face areaNot listedNot listed1 per lot frontage; up to 3 secondary wall signs for frontage >75 ftAffixed to wall of principal structure; not to cover architectural featuresNot listedUnlock17.06.050.A
Single-Tenant Monument Sign5 ft15 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangle1 per lot frontageMinimum 5 ft from property lines, rights-of-way, and utility easements; not in vision triangle; not blocking ingress/egress or placed in sidewalk/walkwayNot listedUnlock17.06.050.B
On-Site Traffic Directional Sign4 ft6 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangleAs necessary per zoning administratorMin 5 ft from property lines, rights-of-way, and utility easements; not in vision triangle; not in sidewalk/walkway or blocking ingress/egressNot listedUnlock17.06.050.E
Wall Mounted Banner SignNot above roofline/parapet/mansard2.5% of wall face areaNot listedNot listed1 per lot frontageAffixed flat to a building wallNot listedUnlock17.06.060.A
Window SignNot listed25% of window areaNot listedNot listedNot listedIn window; applies to individual window unitNot listedUnlock17.06.060.C
Yard Sign3.5 ft4 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangleMax 2 (4 during election period)Min 5 ft from property lines, ROW and utility easements; not in sidewalk/walkway; not in vision triangleNot listedUnlock17.06.060.D

B-1, ORD

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot above highest roofline or top of parapet wall or mansard roof10% of wall face areaNot listedNot listed1 per lot frontage; up to 3 secondary wall signs for frontage >75 ftAffixed to wall of principal structure; not to cover architectural featuresNot listedUnlock17.06.050.A
Single-Tenant Monument Sign10 ft30 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangle1 per lot frontageMin 5 ft from property lines, rights-of-way, and utility easements; not in vision triangle; not blocking ingress/egress or placed in sidewalk/walkwayNot listedUnlock17.06.050.B
Multi-Tenant Monument Sign14 ft60 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangle1 per lot frontageMin 5 ft from property lines, rights-of-way, and utility easements; not in vision triangle; not blocking ingress/egress or placed in sidewalk/walkwayNot listedUnlock17.06.050.C
Awning or Canopy SignNot listed50% of awning/canopy faceNot listedNot listedNot listedOnly on awnings/canopies above ground floor entrances/windowsNot listedUnlock17.06.050.D
On-Site Traffic Directional Sign4 ft6 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangleAs necessary per zoning administratorMin 5 ft from property lines, rights-of-way, and utility easements; not in vision triangle; not blocking ingress/egress or placed in sidewalk/walkwayNot listedUnlock17.06.050.E
Wall Mounted Banner SignNot above roofline/parapet/mansard5% of wall face areaNot listedNot listed1 per lot frontageAffixed flat to a building wallNot listedUnlock17.06.060.A
Ground Mounted Banner Sign6 ft32 sq ftNot listedMin 5 ft from property lines, ROWs, easements; not in vision triangle1 per lot frontageMin 5 ft from property lines, ROWs, and utility easements; not in vision triangle; not blocking ingress/egress or in sidewalk/walkwayNot listedUnlock17.06.060.B
Window SignNot listed25% of window areaNot listedNot listedNot listedIn window; applies to individual window unitNot listedUnlock17.06.060.C

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Aggregate Permanent Sign AreaNot listedSee formulaNot listedNot listedNot listedNot listedNot listedUnlock17.06.020.A, C
Aggregate Temporary Sign AreaNot listedSee formulaNot listedNot listedNot listedNot listedNot listedUnlock17.06.020.B

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Hainesville with a free PermitPal account.

Run a free code check

Prohibited Signs in Hainesville

  • Feather signs are prohibited in all zoning districts.
  • Pylon/pole signs are prohibited in all zoning districts.
  • Roof signs are prohibited in all zoning districts.
  • Outline lighting is prohibited in all zoning districts.
  • Billboards are prohibited in all zoning districts.
  • Attention getting devices are prohibited in all zoning districts.
  • Painted wall signs are prohibited in all zoning districts.
  • Signs which encroach on the public right-of-way are prohibited in all zoning districts.
  • Text or graphics of an indecent or immoral nature and harmful to minors are prohibited on any sign.
  • Text or graphics that advertise unlawful activity are prohibited on any sign.
  • Text or graphics that are obscene, fighting words, defamation, incitement to imminent lawless action, or true threats are prohibited on any sign.
  • Text or graphics that present a clear and present danger due to their potential confusion with traffic control signs or signs that provide public safety information (e.g., use of words like 'Stop', 'Yield', 'Caution', or 'Danger') are prohibited.
  • No sign may be constructed, erected, or maintained in violation of the provisions of this title.
  • Signs must not create a hazard due to collapsing, catching fire, decaying, confusing or distracting motorists, or impair drivers' ability to see pedestrians, obstacles, other vehicles, or to read traffic signs.
  • Signs must not obstruct rights-of-way or create litter or obstructions in the village's rights-of-way.

Exempt Signs in Hainesville

  • Window signs are allowed in all districts (marked 'A' in Table 17.06.040) and do not require a permit.
  • Yard signs are allowed in R-1 and R-2 districts (marked 'A' in Table 17.06.040) and do not require a permit.
  • Sign area limits are aggregate allowances per lot frontage and apply regardless of sign message content.
  • Temporary signs of permitted area, number, and type as allowed by these regulations may be displayed without reference to content, including noncommercial messages.
  • Any illumination standards exempt signs that are not illuminated or where illumination does not produce glare or direct light upon adjacent property or streets.

Sign Plan & Submission Notes for Hainesville

  • Wall signs: A maximum of three secondary wall signs may be authorized for buildings with lineal frontage in excess of seventy-five (75) feet by the zoning administrator provided certain design standards are met (Section 17.06.050.A.4.a). This may involve a discretionary review.
  • The zoning administrator is authorized to determine the permitted number of on-site traffic directional signs as necessary to assist in safe traffic movement on a property (Section 17.06.050.E.3).
  • Each lot is subject to overall aggregate sign area limits based on frontage (Section 17.06.020), which must be coordinated as a de facto sign plan for the property.
  • No explicit mention is made within the provided text of a required 'Master sign plan', 'sign plan', or required variance meeting for signs; discretionary or administrative review (by zoning administrator) is referenced for some types and quantities of signage.
  • Permitted sign types (those marked 'P' in Table 17.06.040) require the issuance of a sign permit as detailed in Section 17.08.020.D (not included in the provided text), which may constitute a sign plan or application.

Source: municode municipal code