Sign Regulations in Manhattan, Illinois

Manhattan, Illinois has specific sign regulations covering 35 sign types across 4 zoning districts. Regulated sign types include All signs permitted in Residential Districts, Agricultural Districts, Changeable Copy Sign (Electronic), Changeable Copy Sign (Manual/Mechanical). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Sign Regulation Overview for Manhattan, Illinois

Sample Sign Requirements in Manhattan

Sign TypeMax HeightMax AreaSetback
Name and Address Plate1 sq ft (single family); 3 sq ft (buildings >2 units)
Memorial Sign or Tablet5 sq ft
No Trespassing or Regulatory Sign2 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for ManhattanFull Coverage

Sign Types Covered

35

  • All signs permitted in Residential Districts, Agricultural Districts
  • Changeable Copy Sign (Electronic)
  • Changeable Copy Sign (Manual/Mechanical)
  • Name and Address Plate
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

Sign height limits in Manhattan vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Manhattan, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Manhattan, regulated sign types include All signs permitted in Residential Districts, Agricultural Districts, Changeable Copy Sign (Electronic), Changeable Copy Sign (Manual/Mechanical), Name and Address Plate, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Manhattan vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Manhattan are regulated with specific requirements for brightness, animation, and message duration. Manhattan has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Manhattan Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Manhattan, Illinois sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Manhattan, Illinois Sign Rules at a Glance

Manhattan, Illinois regulates 35 sign types across 4 zoning districts. Identification Sign for Nonresidential Use (church, cemetery, golf, recreation)s in the Residential Districts, Agricultural Districts zoning district are capped at 8 ft (if freestanding sign) tall and 32 sq ft (Sec. 4-11-15C). Most commercial signs in Manhattan require a permit.

Detailed Sign Ordinance Requirements for Manhattan, Illinois

Sign Rules by Zoning District in Manhattan (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts, Agricultural Districts1415 ft100 sq ft
Commercial Zoning Districts1415 ft180 sq ft (main); 100 sq ft (additional)
Industrial Zoning Districts715 ft200 sq ft
General Regulations For All Zones35 ft10 sq ft per panel

Zone-by-Zone Sign Requirements in Manhattan(sample of 3 of 4 zones)

Residential Districts, Agricultural Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Name and Address Plate1 sq ft (single family); 3 sq ft (buildings >2 units)Unlock4-11-14A, 4-11-15B
Memorial Sign or Tablet5 sq ftUnlock4-11-14B
No Trespassing or Regulatory Sign2 sq ftUnlock4-11-14C
Garage Sale Sign6 sq ftAt curb in residential areasUnlock4-11-14I
Temporary Sign (Farm, Auction, Political, Charitable Event)32 sq ftOn private propertyUnlock4-11-14J
Identification Sign for Nonresidential Use (church, cemetery, golf, recreation)8 ft (if freestanding sign)32 sq ftOne per building entranceAt building entranceUnlock4-11-15C
Temporary Residential Marketing Sign (on site)15 ft100 sq ftAt major entrances to planned unit developments or residential subdivisionsUnlock4-11-15E
Temporary Residential Marketing Sign (off site)10 ft32 sq ftNo more than 4 per developmentOff-site direction to development, on private propertyUnlock4-11-15F

Commercial Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Single/Combined Use)10 ft100 sq ftOne per street frontagePer street frontageUnlock4-11-16B1
Freestanding Sign (Shopping Plaza)15 ft150 sq ftOne per street frontagePer street frontageUnlock4-11-16B2
Freestanding Sign (Shopping Center Main)15 ft180 sq ft (main); 100 sq ft (additional)Two per street frontage (1 main, 1 per tenant)Per street frontageUnlock4-11-16B3
Real Estate Sign (Commercial)10 ftUp to 100 sq ft per faceOne per street frontagePer street frontageUnlock4-11-16B4
Gasoline Price Sign15 sq ft (if attached to poles, not included in total signage), above 15 sq ft included in computationOne per street frontagePermanently mounted on a poleUnlock4-11-16B5
Pole Mounted Banner (Shopping Plaza/Center)Lower edge at least 9 ft above ground10 sq ftOn light pole in retail areaUnlock4-11-16B6
Wall Sign (Single Use Building)2 sq ft per linear foot of facadeMax 4On building wall, not projecting more than 12 inches; not above rooflineUnlock4-11-16C1, C5, defs
Wall Sign (Combined Use Building)2 sq ft per linear foot of facadeMax 6On building wall, not projecting more than 12 inches; not above rooflineUnlock4-11-16C2, C5, defs

Industrial Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
All signs permitted in Residential Districts, Agricultural DistrictsUnlock4-11-17A
Wall Sign2 sq ft per linear foot of tenant building frontageOn building wall, not projecting more than 12 inches; not above rooflineUnlock4-11-17B, defs
Freestanding Sign200 sq ftOne per street frontageOn private property per street frontageUnlock4-11-17C
Real Estate Sign (Industrial)15 ftUp to 200 sq ft/faceOne per street frontagePer street frontageUnlock4-11-17D
Development Sign (Industrial Park Entrance)200 sq ftAt entrance, on private propertyUnlock4-11-17F
Changeable Copy Sign (Electronic)Unlock4-11-17G
Changeable Copy Sign (Manual/Mechanical)Unlock4-11-17H

PermitPal covers all 4 zoning districts in Manhattan — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Manhattan — start free

Prohibited Signs in Manhattan

  • Moving, rotating or animated signs, except traditional barber poles, not exceeding two feet in height and projecting not more than twelve inches from the building, utilized only to identify a haircutting establishment.
  • Searchlights other than for grand openings.
  • Sign illumination that is not steady and constant.
  • Signs that emit noise, an odor or other visible matter.
  • Signs attached to trees, standpipes, or fire escapes.
  • Signs attached to fences, public utility poles or stanchions located in the right of way other than signs or banners of a community oriented nature issued by or approved by government officials or public utilities.
  • Windows painted or posted in excess of an amount that would restrict reasonable view of the interior or exterior.
  • Human signs.
  • Video display signs.
  • Multivision signs.
  • Signs not listed in sections 4-11-14, 4-11-15, 4-11-16, 4-11-17, 4-11-18 and 4-11-19 of this chapter shall be deemed to be prohibited, even though such signs are not specifically listed in this section.
  • Electronic graphic display signs.
  • Signs with exposed light bulbs, flashing, blinking, traveling or similar illumination.
  • Signs constructed or placed so that direct rays reflect into a public way or any lot on the perimeter of the premises.
  • Signs placed over any public way that are less than eight feet above the sidewalk or less than fifteen feet above areas used by vehicles.
  • Signs extending over any street, alley, sidewalk or other public place without a permit.
  • Signs attached to wireless service facility towers except those for warnings or equipment information.

Exempt Signs in Manhattan

  • Name and address plates which give only the name and address of the resident of the building, and which are not more than one square foot in sign area.
  • Memorial signs or tablets and signs denoting the date of erection of buildings, no larger than five square feet.
  • No trespassing signs or other such signs regulating the use of a property, not more than two square feet in sign area in residential districts and six square feet in all commercial and industrial districts.
  • Real estate signs, not exceeding six square feet per side in all districts. Such real estate signs shall be removed within fifteen days after the premises so advertised has been sold or leased.
  • Signs regulating on premises traffic and parking, and signs denoting building facilities such as lavatories and public telephone areas, when less than six square feet in area and bearing no commercial advertising.
  • Signs erected by a governmental body, or under the direction of such a body, and bearing no commercial advertising, such as traffic signs, railroad crossing signs, safety signs, and signs identifying public schools and playgrounds.
  • The flag, pennant, or insignia of any government, or of any religious, charitable, or fraternal organization.
  • One logo flag of a company shall be allowed provided it is flown with and is not larger than the American flag.
  • Garage sale signs, not exceeding six square feet in area, may be placed at the curb in residential areas for not to exceed ten days.
  • Temporary signs no larger than thirty two square feet in area advertising the sale of edible farm products on the premises, advertising auctions, political candidates, or special events of charitable, governmental or public service groups. Such signs must be located entirely on privately owned property and must be removed upon close of the event.
  • Temporary window signs of paper or similar material shall be allowed in commercial districts, provided such signs are to be used to notify the public of special sales or current prices, and further provided such signs do not restrict the reasonable viewing of the interior or exterior.
  • Signs included in an approved comprehensive sign plan which meet exemption criteria as outlined in Section 4-11-18(D), such as parking lot identification signs, shopping center map signs, and certain wayfinding signs.
  • Temporary signs (per Section 4-11-8) do not require a permit (general exemption from permitting, but must meet other requirements).
  • Certain signs under Section 4-11-14 are not counted toward total sign number or area and do not require a permit but must meet general regulations (height, setback, etc.).

Sign Plan & Submission Notes for Manhattan

  • A comprehensive sign plan is required where an applicant/developer seeks to vary from the standard sign ordinance provisions in order to establish signage criteria tailored to a specific development, building, multi-building development site, or multi-tenant building.
  • A comprehensive sign plan must be approved as a special use via recommendation from the planning and zoning commission and approval by the village board.
  • The comprehensive sign plan application must contain detailed plans for all proposed signs (location, size, materials, color, illumination, etc.), as well as the required computations.
  • Major changes to an approved comprehensive sign plan require approval by the village board after recommendation from the planning and zoning commission; minor changes may be approved administratively.
  • Construction and placement of individual signs under an approved comprehensive sign plan are still subject to sign permits.
  • A sign plan ('sign map') is required for street sign installations in new developments, to be approved by the village board and police department before signs are installed.