Questions? Call us at (262) 218-2915

Sign Regulations in Maryville, Illinois

Maryville, Illinois has specific sign regulations covering 22 sign types across 10 zoning districts. Regulated sign types include Wall Sign, Projecting Sign, Freestanding Sign (Pole or Ground). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Maryville, Illinois

Sample Sign Requirements in Maryville

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed100 sq ft per signNot listed
Projecting SignNo more than 5 ft above highest roof point100 sq ft per signNot listed
Freestanding Sign (Pole or Ground)No free-standing sign shall exceed 35 ft in height100 sq ft per signSetback as required for principal building; see § 156.049(G)(3)

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for MaryvilleFull Coverage

Sign Types Covered

22

  • Wall Sign
  • Projecting Sign
  • Freestanding Sign (Pole or Ground)
  • Portable Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Maryville, the height limit for Projecting Sign in the B-1 Community Business District is 5 ft above highest roof point. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Maryville require a permit. From the submission notes on this page: An application for a sign permit must be accompanied by plans and specifications drawn to scale, which must include dimensions, material, details of construction, a colored rendering of the proposed sign, and a site plan indicating sign location. Run a code check for an exact address to see the permit requirements for that zone.

Maryville's sign code covers 22 sign types, including Wall Sign, Projecting Sign, Freestanding Sign (Pole or Ground), and Portable Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: No permit fees are required for the erection of the above-listed exempt signs. The full list is on this page.

This page doesn't list a single setback distance for signs in Maryville. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Maryville's sign ordinance that cover digital, changing, or flashing signs: Exterior use of advertising devices such as pennants affixed on poles, wires or ropes; streamers; wind operated devices; searchlights; flashing lights; fluttering devices (except as provided for special events). Signs containing flashers, animators, mechanical movement or contrivances of any kind (excepting permitted electronic message boards). No moving sign (a sign with moving parts) or signs with varying intermittent lighting intensity shall be permitted in any street (§ 156.049(B)). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Maryville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Maryville, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Maryville, Illinois Sign Rules at a Glance

Maryville, Illinois regulates 22 sign types across 10 zoning districts. Projecting Signs in the B-1 Community Business District are capped at 5 ft above highest roof point and 100 sq ft per sign. Most commercial signs in Maryville require a permit.

Detailed Sign Ordinance Requirements for Maryville, Illinois

Sign Rules by Zoning District in Maryville (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
B-1 Community Business District4No free-standing sign shall exceed 35 ft in height100 sq ft per signNot listed
B-2 General Business District4No free-standing sign over 35 ft high100 sq ft per sign; may be increased by 1 sq ft per each 2 linear ft of setback from required setback lineNot listed
Industrially Zoned Areas, Commercially Zoned Areas130 ft above preexisting grade1200 sq ft per faceNot listed
Residentially Zoned Properties45 ft8 sq ftNot listed
Residential Subdivision2Not listed25 sq ft (exclusive of supports)Not listed
Office Building110 ft above grade, but not above roof line100 sq ft (all signs on monument)Not listed
Community or Regional Shopping Center2100 ft125 sq ft per face (all signs on monument)Not listed
Neighborhood Shopping Center120 ft above grade100 sq ft per face (all signs on monument)Not listed
Gasoline Stations or Automotive Service Centers222 ft (28 ft if with reader board)36 sq ft per faceNot listed
General Regulations For All Zones5Not listed100 sq ftNot listed

Zone-by-Zone Sign Requirements in Maryville(sample of 3 of 10 zones)

B-1 Community Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ft per signNot listedNot listedMaximum two signs per building (one per type)Affixed to building facing streetNot listedUnlock§ 156.049(F); § 155.38; § 155.05
Projecting SignNo more than 5 ft above highest roof point100 sq ft per signMay project up to 4 ft from the principal buildingNot listedMaximum two signs per building (one per type)Attached to principal building frontNot listedUnlock§ 156.049(F); § 155.51
Freestanding Sign (Pole or Ground)No free-standing sign shall exceed 35 ft in height100 sq ft per signNot listedSetback as required for principal building; see § 156.049(G)(3)Maximum two signs per building (one per type)On business' lot, may project up to 6 ft into right-of-way above 10 ftNot listedUnlock§ 156.049(F)(3,6); § 155.40, § 155.41
Portable SignNot listed40 sq ftNot listedNot listed1On property of businessNot listedUnlock§ 156.049(J)

B-2 General Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNo point more than 5 ft above the highest point of the roof100 sq ft per sign; may be increased by 1 sq ft per each 2 linear ft of setback from required setback lineNot listedNot listedMax two types per business; one of eachBuilding frontNot listedUnlock§ 156.049(G)(1,2,6); § 155.38
Projecting SignNo more than 5 ft above the highest point of the roof100 sq ft (may be increased as above)May project up to 8 feet from building; signs may project up to 6 ft into right-of-way above 10 ft clearanceNot listedMax two types per business; one of eachBuilding frontNot listedUnlock§ 156.049(G)(1,4,6); § 155.51
Freestanding Sign (Pole or Ground)No free-standing sign over 35 ft high100 sq ft per sign; can be increased by additional setbackNot listedNo free-standing sign under 10 ft high or with supports obstructing vision shall be set nearer to lot line than the minimum setback for principal buildingMax two types per business; one of eachOn property of business; must meet setback for principal buildingNot listedUnlock§ 156.049(G)(1,3,5,6); § 155.40, § 155.41
Portable SignNot listed40 sq ftNot listedNot listed1On business propertyNot listedUnlock§ 156.049(J)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Ground Sign (Future Use/Development)Not listed100 sq ftNot listedNo part may project beyond 5 ft setback from street ROWNot listedOn property to be developedNot listedUnlock§ 155.37(A)
Temporary For Sale/Lease Sign (New Building)Not listed32 sq ftNot listedNot listedNot listedOn property being sold/leasedNot listedUnlock§ 155.37(B)
Temporary For Sale/Lease Sign (Existing Building)Not listed12 sq ftNot listedNot listedNot listedOn property being sold/leasedNot listedUnlock§ 155.37(C)
Directional SignNot listed4 sq ftNot listedNot listedNot listedEntrance/exit, subject to public purpose determinationNot listedUnlock§ 155.53
Under Canopy SignNot listed4 sq ftNot listedNot listedNot listedUnder canopy, attached to business's canopyNot listedUnlock§ 155.56

PermitPal covers all 10 zoning districts in Maryville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Maryville

  • Signs or devices that by color, location, or design resemble or conflict with traffic-control signs or devices.
  • Exterior use of advertising devices such as pennants affixed on poles, wires or ropes; streamers; wind operated devices; searchlights; flashing lights; fluttering devices (except as provided for special events).
  • Letters or pictures in the form of advertising printed or applied directly on the wall of a building.
  • Signs containing flashers, animators, mechanical movement or contrivances of any kind (excepting permitted electronic message boards).
  • Paper posters and painted signs applied directly to a wall, pole, or other support.
  • Signs painted on the inside or outside of windows.
  • Signs advertising an article or product not manufactured, assembled, processed, repaired, or sold upon the premises unless otherwise permitted by ordinance.
  • Portable signs (with very limited exceptions, e.g., vehicles used in the normal operation of a business).
  • Signs advertising a service not rendered on the premises unless otherwise permitted by ordinance.
  • Revolving signs.
  • Signs in residential districts for home occupations.
  • Signs on parking lot light standards.
  • Signs with more than two faces.
  • Roof signs.
  • Banners, pennants, or flags suspended from an awning.
  • Exterior banner signs (except as specifically allowed).
  • Signs placed so as to create a traffic hazard.
  • No sign shall be located on public property other than permitted residential subdivision identification signs.
  • No sign shall be erected or maintained so as to prevent free ingress or egress from any door, window, or fire escape.
  • No sign shall be attached to a standpipe or fire escape.
  • It is unlawful to display obscene, indecent, or immoral matter upon any sign.
  • All signs must be maintained in good repair; supporting structure must be kept upright.
  • Signs which are unsafe or hazardous, prohibited, erected without a required permit, unpaid, or not maintained are subject to removal.
  • No person shall place a sign across any street, alley, or sidewalk without written approval of the Village Board.
  • No person shall nail, tack, paste, paint, or fasten any sign to utility/police/fire poles or posts, or any street or traffic sign.
  • No person shall place, maintain, or display upon or in view of any highway any unauthorized sign, signal, marking, or device resembling an official traffic device or attempting to direct/hide/interfere with traffic.
  • No person shall place or maintain commercial advertising upon any highway sign or signal.
  • Advertising signs and billboards are not permitted in any zoning district (§ 156.049(I)).
  • No moving sign (a sign with moving parts) or signs with varying intermittent lighting intensity shall be permitted in any street (§ 156.049(B)).

Exempt Signs in Maryville

  • Sign regulations do not apply to governmental signs including traffic signs erected for public information, direction, safety, or control purposes.
  • The following signs are exempt from permit requirements: real estate signs (≤6 sq. ft., only advertising the sale/rental/lease of the premises on which the sign is located); bulletin/reader boards (≤25 sq. ft. for public, charitable, or religious institutions, on the premises, color limitations); architect/engineer/contractor signs (≤16 sq. ft. for residential, ≤32 sq. ft. for commercial, only for duration of construction); memorial signs/tablets, names of buildings/dates of erection cut into masonry or incombustible material; traffic or other municipal signs, legal notices, railroad crossing signs, danger/emergency/non-advertising signs; political signs meeting size, duration, placement, and property owner consent requirements; professional name plates (≤3 sq. ft.); occupational signs (≤4 sq. ft. on building); signs erected inside a building not visible through windows; yard or garage sale signs abiding by specific restrictions.
  • No permit fees are required for the erection of the above-listed exempt signs.
  • Sign regulations of § 156.049 do not apply to governmental signs including traffic signs for public information, direction, safety, or control.
  • The section on unauthorized signs does not prohibit private property owners from erecting signs with directional information that cannot be mistaken for official signs adjacent to highways.

Sign Plan & Submission Notes for Maryville

  • An application for a sign permit must be accompanied by plans and specifications drawn to scale, which must include dimensions, material, details of construction, a colored rendering of the proposed sign, and a site plan indicating sign location.
  • All signs hereafter constructed, corrected, painted or otherwise established, moved, altered or changed must comply with sign regulations; exception is given for repair/maintenance of lawful, nonconforming signs, per code.
  • Permit applications may be regulated in form and content by the enforcement official.
  • A plan for any proposed residential subdivision identification sign must be submitted to the enforcement official, who may impose specifications for safety purposes prior to approval.
  • In any subdivision for which a plat has been filed for approval, non-illuminated subdivision signs require a permit and are subject to additional schedule and time limits or may require Board of Zoning Appeals approval for time extension.
  • Where permit application is denied, appeals or variances may be sought before the Board of Zoning Appeals as provided by Zoning Code.
  • Applicants for permits must submit evidence of property owner agreement for sign installation and removal provisions.
  • In the B-1 and B-2 districts, several sign area and class regulations reference other sections and schedules, which may require additional plan review.