Questions? Call us at (262) 218-2915

Sign Regulations in Mount Vernon, Illinois

Mount Vernon, Illinois has specific sign regulations covering 51 sign types across 7 zoning districts. Regulated sign types include Roof Sign (Conditional Use; in lieu of other building signs), Off-Premise Freestanding Sign (Conditional Sign Permit required), Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 26, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Mount Vernon, Illinois

Sample Sign Requirements in Mount Vernon

Sign TypeMax HeightMax AreaSetback
Window Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Not listed
Wall Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Not listed
Temporary Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Must comply with general setbacks/vision clearance in § 161.251(B)

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Mount VernonFull Coverage

Sign Types Covered

51

  • Roof Sign (Conditional Use; in lieu of other building signs)
  • Off-Premise Freestanding Sign (Conditional Sign Permit required)
  • Freestanding Sign
  • Canopy/Marquee/Architectural Projection Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Mount Vernon

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Mount Vernon, the height limit for Off-Premise Freestanding Sign (Conditional Sign Permit required) in the Business Zoning Districts (B-1, B-2, B-3, B-PL) is 30 ft (Sec. 161.258(C)(1)-(14)). The height limit for Sexually Oriented Business - Wall Sign (I-1 only) in the Industrial Zoning Districts (I-1, I-2, I-A) is 25 ft (top of sign). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Mount Vernon require a permit. From the submission notes on this page: Roof signs are permitted only by Conditional Use in Non-Residential districts and are in lieu of other building signs; area is limited per Table 3 and height caps by district apply. Run a code check for an exact address to see the permit requirements for that zone.

Mount Vernon's sign code covers 51 sign types, including Roof Sign (Conditional Use; in lieu of other building signs), Off-Premise Freestanding Sign (Conditional Sign Permit required), Freestanding Sign, and Canopy/Marquee/Architectural Projection Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Routine maintenance or changing parts designed for changes is not considered an alteration (and does not trigger a permit) if it does not alter surface area, height, or make the sign nonconforming. The full list is on this page.

In Mount Vernon, Sexually Oriented Business - Freestanding Sign (I-1 only) in the Industrial Zoning Districts (I-1, I-2, I-A) must be set back at least 10 ft from right-of-way and adjoining property. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Mount Vernon's sign ordinance that cover digital, changing, or flashing signs: Flashing signs (defined as illumination cycles with on/off phases of 4 seconds or less). Electronic Message Centers on permitted non-residential use sites in Residential districts require a Conditional Use Permit (EMCs are permitted signs on non-residential use sites in the R-3 district; EMCs are permitted in Non-Residential districts subject to §161.253). Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Mount Vernon Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Mount Vernon, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Mount Vernon, Illinois Sign Rules at a Glance

Mount Vernon, Illinois regulates 51 sign types across 7 zoning districts. Off-Premise Freestanding Signs (Conditional Sign Permit required) in the Industrial Zoning Districts (I-1, I-2, I-A) are capped at 30 ft tall and 100 sq ft per side (Sec. 161.258(C)(1)-(14)). Most commercial signs in Mount Vernon require a permit.

Detailed Sign Ordinance Requirements for Mount Vernon, Illinois

Sign Rules by Zoning District in Mount Vernon (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Zoning Districts (R-1, R-2, R-M2, R-MH, R-3)1215 ft75 sq ft per sign (or 64 sq ft if using directory option)Not listed
Agricultural Zoning District (A-G)940 ft100 sq ft (per sign)Not listed
Flood Plain Zoning District (F-P)940 ft100 sq ft (per sign)Not listed
Business Zoning Districts (B-1, B-2, B-3, B-PL)13Up to 120 ft (see Table 2 tiers)Up to 450 sq ft (see Table 2 tiers)Not listed
Industrial Zoning Districts (I-1, I-2, I-A)11Up to 66 ft (see Table 2 tiers)Up to 450 sq ft (see Table 2 tiers)Not listed
IPCA-PUD9Up to 120 ft (see Table 2 tiers)Up to 450 sq ft (see Table 2 tiers under B-3/IPCA-PUD)Not listed
General Regulations For All Zones930 ft100 sq ft per sideNot listed

Zone-by-Zone Sign Requirements in Mount Vernon(sample of 3 of 7 zones)

Residential Zoning Districts (R-1, R-2, R-M2, R-MH, R-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Window Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Not listedNot listedAny number so long as total sign area on site does not exceed 8 sq ftOn the dwelling; trees, rocks or other natural landscape features may not be used to support signsNot listedUnlock§ 161.249(A); § 161.226; § 161.254(A)
Wall Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Not listedNot listedAny number so long as total sign area on site does not exceed 8 sq ftAffixed to dwellingNot listedUnlock§ 161.249(A); § 161.251(E)(2)
Temporary Sign (Single Family or Two Family)6 ft8 sq ft total (site aggregate)Not listedMust comply with general setbacks/vision clearance in § 161.251(B)Any number so long as total sign area on site does not exceed 8 sq ftOn private property; not on trees/rocks/natural featuresNot listedUnlock§ 161.249(A), § 161.251(J)(1) and (3); § 161.226(I)
Freestanding Sign (Multi-family Complex / Manufactured Home Park / Legal Subdivision)15 ft48 sq ft per signNot listedMust meet general setbacks/vision clearance in § 161.251(B)One per each street frontageAt each separate street frontage of the complex, park, or subdivision siteNot listedUnlock§ 161.249(B)
Directional Sign (Multi-family Complex / Manufactured Home Park / Legal Subdivision)8 ft (if freestanding)6 sq ft per signNot listedMust meet general setbacks/clearancesUnlimitedOn the site as needed for internal directionNot listedUnlock§ 161.249(B); § 161.251(H)(3)
Freestanding Sign (Permitted Non-Residential Use Site in a Residential District)15 ft75 sq ft per sign (or 64 sq ft if using directory option)Not listedMust meet general setbacks/vision clearance in § 161.251(B)One per each street frontageAt each separate street frontageNot listedUnlock§ 161.249(C)
Directory Sign (In Lieu of Freestanding) - Option 1 (Permitted Non-Residential Use in Residential District)15 ft64 sq ft per signNot listedMust meet general setbacks/vision clearanceOne per each street frontage (in lieu of freestanding on that frontage)At each separate street frontageNot listedUnlock§ 161.249(C)
Directional Sign (Permitted Non-Residential Use Site in a Residential District)8 ft (if freestanding)6 sq ft per signNot listedMust meet general setbacks/clearancesUnlimitedOn the siteNot listedUnlock§ 161.249(C)

Business Zoning Districts (B-1, B-2, B-3, B-PL)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (B-1, B-2, B-PL)40 ft100 sq ft (per sign)Not listedB-2: minimum 10 ft from right-of-way or adjoining property; B-3 has same 10 ft rule (see B-3 entry); general setbacks/vision clearance applyBaseline and additional signs per frontage length as describedOn-premiseNot listedUnlock§ 161.250(B)(1)(a)-(b); Table 2 (B-1, B-2, B-PL column); § 161.250(B)(6)(a); § 161.254
Freestanding Sign (B-3)Up to 120 ft (see Table 2 tiers)Up to 450 sq ft (see Table 2 tiers)Not listedMinimum 10 ft from right-of-way or adjoining property in B-3; general setbacks/vision clearance applyBaseline and additional signs per frontage length as describedOn-premiseNot listedUnlock§ 161.250(B)(1)(b)2.; Table 2 (B-3 column)
Projecting Sign (Business Districts General)Not listedUp to 100 sq ft (and limited by 1 sq ft per 2 linear feet of façade)Not listedNo extension into right-of-way except in B-1 (see next entry)As stated in additional requirementsMounted to building façade in Business Districts; not on rooftops or pitched roofsNot listedUnlock§ 161.250(B)(6)(a)-(e); § 161.251(G)
Projecting Sign Over Public Sidewalk (B-1 Only)Not listedAs limited by 1 sq ft per 2 linear feet of façade (max 100 sq ft)Not listedRight-of-way extension allowed only as specifiedPer projecting sign limitsMay extend into the public right-of-way over a sidewalk only within B-1Not listedUnlock§ 161.251(C)(1); § 161.250(B)(6)
Roof Sign (Conditional Use; in lieu of other building signs)Height above highest architectural point may not exceed 25% of façade vertical dimension (Business District)Per Table 3Not listedNot listedReplaces other building signsMounted on roofNot listedUnlock§ 161.250(B)(3)(a)1.-(b)
Directional Sign (Business Districts)8 ft (freestanding)Freestanding: 6 sq ft; Wall: 16 sq ftNot listedGeneral setbacks/clearances applyUnlimitedOn-siteNot listedUnlock§ 161.251(H)(1); Table 4
Temporary Signs (Business Districts)6 ft50 sq ft totalNot listedMust comply with general setback and clearance requirementsAny number within 50 sq ft totalOn private propertyNot listedUnlock§ 161.251(J)(2)-(3); Table 4
Off-Premise Freestanding Sign (Conditional Sign Permit required)30 ft100 sq ft per sideNot listedPer § 161.258(C)(10)-(11); and general § 161.251(B)Counts toward property's freestanding sign allowanceOn permitted non-residential property in B-1, B-2, B-3, B-PLNot listedUnlock§ 161.258(C)(1)-(14)

Industrial Zoning Districts (I-1, I-2, I-A)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding SignUp to 66 ft (see Table 2 tiers)Up to 450 sq ft (see Table 2 tiers)Not listedGeneral setbacks/vision clearance; no extension into ROWBaseline and additional signs per frontage length as describedOn-premiseNot listedUnlock§ 161.250(B)(1)(a)-(b); Table 2 (I-1, I-2, I-A column)
Wall/Fascia Sign (Industrial)Not listedPer Table 3 percentagesNot listedNot listedAny number within permitted façade allocationOn façadesNot listedUnlock§ 161.250(B)(2); Table 3; § 161.251(E); § 161.250(B)(2)(c)
Roof Sign (Conditional Use; in lieu of other building signs)Height above highest architectural point may not exceed 40% of façade vertical dimension (Industrial)Per Table 3Not listedNot listedReplaces other building signsMounted on roofNot listedUnlock§ 161.250(B)(3)(a)3.-(b)
Directional Sign (Industrial)8 ft (freestanding)Freestanding: 6 sq ft; Wall: 16 sq ftNot listedGeneral setbacks/clearances applyUnlimitedOn-siteNot listedUnlock§ 161.251(H)(1); Table 4
Temporary Signs (Industrial)6 ft50 sq ft totalNot listedGeneral setback and clearance rules applyAny number within 50 sq ft totalOn private propertyNot listedUnlock§ 161.251(J)(2)-(3); Table 4
Off-Premise Freestanding Sign (Conditional Sign Permit required)30 ft100 sq ft per sideNot listedPer § 161.258(C)(10)-(11) and § 161.251(B)Counts toward freestanding sign allowanceOn permitted non-residential property in I-1, I-2, I-ANot listedUnlock§ 161.258(C)(1)-(14)
Sexually Oriented Business - Freestanding Sign (I-1 only)25 ft (top of sign); minimum ground clearance 10 ft (bottom of sign)75 sq ft (one side) or 150 sq ft (two sides total)Not listedMinimum 10 ft from ROW and adjoining propertyOne freestanding sign permittedOn-site freestandingNot listedUnlock§ 161.252(A)(1), (B)-(G)
Sexually Oriented Business - Wall Sign (I-1 only)25 ft (top of sign)75 sq ftNot listedNot listedOne wall sign permittedOn building wallNot listedUnlock§ 161.252(A)(2), (B)-(G)

PermitPal covers all 7 zoning districts in Mount Vernon. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Mount Vernon

  • Signs containing strobe lights, revolving lights, or search lights
  • Abandoned signs or sign structures remaining on a premises more than 60 days after becoming abandoned
  • Signs placed on or painted on parked motor vehicles or trailers when the primary purpose is to provide signage (business identification on vehicles primarily, actively, and regularly used for transportation is allowed)
  • Signs that imitate or resemble official traffic lights, signs, or signals, or that interfere with the effectiveness of any official traffic device
  • Mechanically moving or environmentally activated signs and displays, including pennants, streamers, spinners, propellers, and search lights
  • Flashing signs (defined as illumination cycles with on/off phases of 4 seconds or less)
  • Posters or handbills affixed to any structure other than a permitted sign structure, or affixed to trees, natural vegetation, rocks, utility poles, or other poles
  • Roof signs, except where permitted by Conditional Use in Non-Residential districts
  • Any sign or sign structure that may be confused with or obstruct authorized traffic signs/signals, that obstructs the sight-distance triangle at intersections, or that unlawfully extends into the public right-of-way
  • Portable signs
  • Signs that prevent free ingress or egress from doors, windows, fire escapes, or free roof access; attaching any sign to a stand-pipe or fire escape
  • Signs that emit smoke, visible vapors, particles, sound, or odor; open flames used to attract attention
  • Use of mirrors as part of a sign
  • Inflatable signs except when used as temporary signs
  • Projecting signs and permanent banners except within Business Zoning Districts
  • Any sign upon or within a public right-of-way or extending into a public right-of-way, unless specifically permitted by the ordinance
  • Any sign type not allowed as a permitted sign or conditional use sign within its zoning district; where the regulations are silent or do not provide a basis to conclude a sign is allowed, the sign is prohibited
  • Any sign constructed of plywood, particle board, or similar material with wood supports (e.g., 2x4, 4x4, 4x6, 6x6) that is larger than 8 square feet or has an exposed support structure greater than 24 inches in height
  • Any sign requiring a permit for which no permit has been obtained, or any sign not placed and maintained in accordance with the Sign Regulations
  • Any sign not legally installed in conformance with regulations in effect at the time of installation; any nonconforming sign for which nonconformity status ceases
  • No sign may be installed within the 30-foot vision clearance triangle at intersections of rights-of-way, alleys, or driveways
  • No sign or awning may extend over areas where vehicles travel or are parked unless the bottom of the structure is at least 14 feet above ground
  • No sign or awning may extend more than 12 inches over pedestrian areas unless the bottom of the structure is at least 8 feet above ground
  • Signs, sign structures, and awnings may not interfere with fire escapes, means of egress, or standpipes; attaching to a fire escape is prohibited
  • Signs, sign structures, and awnings may not obstruct light, ventilation, or exhaust below code requirements
  • All signs and sign structures must be erected and attached entirely on or within the site/property to which they refer; no placement on other property without the owner's written consent
  • No sign (including supports/foundations) may be placed within the right-of-way of any street, alley, or public way, nor upon public property without City Council approval, except as specifically permitted
  • Freestanding signs may not extend into the right-of-way
  • Fascia or wall signs may not extend above the top of the building wall and may not project more than 18 inches from the wall (no more than 4 inches on single- and two-family residential sites)

Exempt Signs in Mount Vernon

  • Routine maintenance or changing parts designed for changes is not considered an alteration (and does not trigger a permit) if it does not alter surface area, height, or make the sign nonconforming
  • Signs not exceeding 1 square foot bearing only property numbers, post box numbers, names of occupants, or other identification of premises without commercial connotations are not subject to a permit
  • Legal notices, identification, informational, or directional signs erected by governmental bodies are not subject to a permit
  • Signs not exceeding 1 square foot that direct and guide traffic and parking on private property, bearing no advertising or property identification, are not subject to a permit
  • Decals or logos affixed to windows or door glass panels (e.g., membership stickers, credit card acceptance) that do not advertise a product/service or identify the property are not subject to a permit
  • Physically Disabled Parking Space or Towing Notice signs permitted by the Illinois Vehicle Code are not subject to a permit
  • On-premise private drive signs limited to one per driveway entrance, not exceeding 1 square foot per sign, are not subject to a permit
  • Public signs erected by government agencies or utilities (traffic, utility, safety, railroad crossing, and public facility identification) are not subject to a permit
  • Security and warning signs (e.g., no trespassing, no hunting, no soliciting) not exceeding one per street frontage and 1 square foot on residential properties, or one per street frontage and 3 square feet on nonresidential properties, are not subject to a permit
  • Temporary signs as defined in §161.251(J) are not subject to a permit
  • Permit fees are not charged when the work is for a governmental entity, fees are not included in any contractor payment, and the applicant obtains all necessary permits or is exempt by law

Sign Plan & Submission Notes for Mount Vernon

  • A sign permit is required before any sign is erected, enlarged, altered, rebuilt, or relocated; transfer of ownership/use of a sign requires a Sign Transfer Permit
  • Off-premise signs are permitted only with a Conditional Sign Permit, are subject to specific placement, size, and spacing conditions, and require payment of initial and annual permit fees
  • Roof signs are permitted only by Conditional Use in Non-Residential districts and are in lieu of other building signs; area is limited per Table 3 and height caps by district apply
  • Electronic Message Centers on permitted non-residential use sites in Residential districts require a Conditional Use Permit (EMCs are permitted signs on non-residential use sites in the R-3 district; EMCs are permitted in Non-Residential districts subject to §161.253)
  • No variance of the Sign Regulations is permitted except a limited setback variance that may be granted by the City Manager under §161.251(B)(1) when right-of-way changes prevent compliance; such variance must be issued by written permit filed with the City Clerk
  • Conditional Sign Permit procedure requires a written application, public notice (mailing, newspaper publication, posting on property), a public hearing before the Board of Appeals, Board findings of compatibility and traffic safety, and a final grant or denial by the City Council

Source: amlegal municipal code