Questions? Call us at (262) 218-2915

Sign Regulations in Park Ridge, Illinois

Park Ridge, Illinois has specific sign regulations covering 42 sign types across 15 zoning districts. Regulated sign types include Ground Monument Sign, Ground Pole Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Park Ridge, Illinois

Sample Sign Requirements in Park Ridge

Sign TypeMax HeightMax AreaSetback
Temporary Sign - Construction Site6 ft16 sq ftNot listed
Temporary Sign - Home Improvement ServicesNot listed4 sq ftNot listed
Temporary Sign - Directional for Public EventsNot listed6 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Park RidgeFull Coverage

Sign Types Covered

42

  • Ground Monument Sign
  • Ground Pole Sign
  • Projecting Sign
  • Directional Sign (Permanent)
  • +2 more types

Zoning Districts

15

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Park Ridge

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Park Ridge, the height limit for Ground Pole Sign in the Commercial Districts is 20 ft (Sec. 14.10.D.1-3). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Park Ridge require a permit. From the submission notes on this page: A master sign plan is required for a commercial development with multiple tenants where more than one wall, awning, or canopy sign is proposed (see subsection 14.14). The master sign plan must be submitted for review and approval by the Planning and Zoning Commission. Run a code check for an exact address to see the permit requirements for that zone.

Park Ridge's sign code covers 42 sign types, including Ground Monument Sign, Ground Pole Sign, Projecting Sign, and Directional Sign (Permanent). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Any sign placed by federal, state, or local government, or authorized by the Zoning Administrator, is exempt from permit as to placement on public property. The full list is on this page.

In Park Ridge, Ground Pole Sign in the Commercial Districts must be set back 10 ft (Sec. 14.10.D.1-3). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Park Ridge's sign ordinance that cover digital, changing, or flashing signs: Signs with blinking, flashing, or moving lights, or other illuminating devices with changing light intensity, brightness, or color, or traveling/chasing lights, or rotating beacons are prohibited. Electronic message board signs are prohibited, except for certain Miscellaneous Information Signs associated with transit agencies as described. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Park Ridge Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Park Ridge, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Park Ridge, Illinois Sign Rules at a Glance

Park Ridge, Illinois regulates 42 sign types across 15 zoning districts. Temporary Signs - Construction Site are capped at 6 ft tall and 16 sq ft (Sec. 14.6.A.1). Most commercial signs in Park Ridge require a permit.

Detailed Sign Ordinance Requirements for Park Ridge, Illinois

Sign Rules by Zoning District in Park Ridge (15 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones147 ft (vertical sign)50 sq ftNot listed
Residential Districts46 ft32 sq ftNot listed
Commercial Districts1420 ft50 sq ftNot listed
Business Districts (B-1, B-2, B-3, B-4)520 ftSee figures: B-1, B-4 Uptown Commercial/Transitional/Public/Institutional: 32 sq ft, 6 ft high; B-2: 50 sq ft, 8 ft high; B-3: 50 sq ft, 8 ft high; Uptown Core, Uptown Commercial Sub-Districts B-4: Monument signs not permittedNot listed
B-1 District, B-4 District (Excluding Sub-Districts: See Details)1Not listed6 sq ftNot listed
B-2 District220 ft50 sq ftNot listed
B-3 District220 ft50 sq ftNot listed
B-4 District - Uptown Core Sub-District1Not listedNot listedNot listed
B-4 District - Uptown Commercial Sub-District16 ft32 sq ftNot listed
B-4 District - Transitional Commercial Sub-District16 ft32 sq ftNot listed
B-4 District - Public/Institutional Sub-District16 ft32 sq ftNot listed
Hospital District27 ft100 sq ftNot listed
Open Space District110 ft50 sq ftNot listed
Educational Boarding District, Sexually-Oriented Business District1Not listedNot listedNot listed
Parking District16 ft (directional); 7 ft (parking area identity)3 sq ft; 9 sq ft for parking area identity sign (up to 7' tall)Not listed

Zone-by-Zone Sign Requirements in Park Ridge(sample of 3 of 15 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign - Construction Site6 ft16 sq ftNot listedNot listed1 per street frontage (1 for SF/2F)On-site, per street frontage (or 1 for SF/2F dwellings)Not listedUnlock14.6.A.1
Temporary Sign - Home Improvement ServicesNot listed4 sq ftNot listedNot listed1On-site at project locationNot listedUnlock14.6.A.1.b
Temporary Sign - Directional for Public EventsNot listed6 sq ftNot listedNot listedNot listedOff-site, for open house or events at gov buildings, parks or educational institutionsNot listedUnlock14.6.A.2
A-Frame Sign (Sandwich Board - Commercial Districts - Temporary)Not listed24 sq ft (12 per side)Not listedNot listed1 per establishmentAlong actual frontage of the establishment (on private or public property with insurance)Not listedUnlock14.6.A.9
For Sale/For Rent Sign (Residential & Special Purpose)6 ft (if ground-mounted)6 sq ftNot listedNot listed1 (interior), 2 (corner)On property for sale/leaseNot listedUnlock14.6.A.4.a
For Sale/For Rent Sign (Commercial District)6 ft (if ground-mounted)16 sq ftNot listedNot listed1 (interior), 2 (corner)On property for sale/leaseNot listedUnlock14.6.A.4.a
Garage or Yard Sale SignNot listed4 sq ftNot listedNot listed2 per saleOn lot of sale and one other with permissionNot listedUnlock14.6.A.5
Temporary Banner or Pennant (Commercial - Large Lot)7 ft (vertical sign)Banner: 12 sq ft; Pennants: each 25 ft counted as one signNot listed5 ft from property lineMax 4 per propertyCommercial districts only; lot must be 80,000 sq ft or moreNot listedUnlock14.6.B.2

Commercial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignNot listedValance: height 8", lettering 6" max; Non-valance: 25% of height, 50% width above valance (one awning); logo: 50% of height above valance (one awning)Not listedNot listedNot listedOn awning; no portion less than 8 ft above sidewalk/thoroughfare; not less than 4 ft from curb lineNot listedUnlock14.10.A
Canopy SignNot listedNot listedNot listedNot listed1 per street frontageOn vertical face/fascia onlyNot listedUnlock14.10.B
Ground Monument Sign8 ft50 sq ftNot listed5 ft (except B-3, see district)1 per lot (2 if corner lot, 1 per frontage)On-site; minimum 5 ft setback from property line, except B-3 (to property line)Not listedUnlock14.10.C.1-2
Ground Pole Sign20 ftSee zone-specific (B-2: 32 sq ft, B-3: 50 sq ft)Not listed10 ft1 per lot (2 for >200 ft corner)On-siteNot listedUnlock14.10.D.1-3
Projecting SignNot listed6 sq ftNot listedNot listed1 per ground floor businessAbove 1st floor windows, below 2nd floor sill; max 4 ft from face of buildingNot listedUnlock14.10.F
Automatic Teller Machine (ATM) SignNot listed3 sq ft (on one side)Not listedNot listed1 per ATMOn ATM only (exterior portion/drive-through)Not listedUnlock14.10.I
Directional Sign (Permanent)6 ft3 sq ftNot listedNot listedBased on driveway/intersectionsOn-site, not beyond property lineNot listedUnlock14.10.J
Bus Shelter Sign (Advertising)Not listed25% of wall spaceNot listedNot listedAs permitted by wall areaPrivate property, wall parallel to road, bus shelterNot listedUnlock14.10.L

Business Districts (B-1, B-2, B-3, B-4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Monument Sign - Business DistrictsSee aboveSee figures: B-1, B-4 Uptown Commercial/Transitional/Public/Institutional: 32 sq ft, 6 ft high; B-2: 50 sq ft, 8 ft high; B-3: 50 sq ft, 8 ft high; Uptown Core, Uptown Commercial Sub-Districts B-4: Monument signs not permittedNot listed5 ft except B-3 (property line)1 per lot (2 for corner, 1 per frontage)On-site, 5 ft setback unless in B-3 (may go to property line)Not listedUnlock14.10.C, Figure 32A, 32B, 32C
Ground Pole Sign - B-2, B-3 Only20 ftB-2: 32 sq ft; B-3: 50 sq ftNot listed10 ft1; more per corner lot >200 ftOn-site; 10 ft setbackNot listedUnlock14.10.D, Figure 32B, 32C
Wall Sign (Business Districts - Main Street Frontage)Not listedNot listedNot listedNot listed1 per street-facing wallFacing public street; first floor onlyNot listedUnlock14.10.G.9
Wall Sign (Business Districts - Secondary Frontage)Not listedNot listedNot listedNot listed1 per qualifying frontageFacing other public streetsNot listedUnlock14.10.G.9.b
Wall Sign (Per Tenant, Multi-Tenant Building)Not listedNot listedNot listedNot listed1 per tenant per wallPublic street facing wall per tenant unitNot listedUnlock14.10.G.9.c, 14.14

PermitPal covers all 15 zoning districts in Park Ridge. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Park Ridge

  • It is unlawful to erect, relocate, or structurally alter any sign or other advertising structure on any property, public or private, without first obtaining a sign permit from the City, unless specifically exempted.
  • No sign shall be placed or erected on any public property, except for signs placed by federal, state, and/or local governments, those authorized by the Zoning Administrator, or certain political signs on election days as specified.
  • No sign shall be placed on any private property without prior consent of the property owner.
  • All signs must comply with the view obstruction provisions of Section 11.2.G.
  • No sign may encroach upon the public right-of-way, unless specifically allowed (e.g., certain transit signs and projecting signs as defined).
  • Signs which constitute a hazard to safety or health by reason of inadequate design, construction, repair, or maintenance are prohibited.
  • Signs that obstruct ingress to or egress from any door, window, or fire escape or that are attached to a standpipe or fire escape are prohibited.
  • Signs with blinking, flashing, or moving lights, or other illuminating devices with changing light intensity, brightness, or color, or traveling/chasing lights, or rotating beacons are prohibited.
  • Signs with moving, revolving, or rotating parts or that have visible mechanical movement of any kind (except clocks with movable hands) are prohibited.
  • Signs advertising a business, product, service, or activity that is no longer located on the premises (obsolete or abandoned) are prohibited.
  • Off-premise signs are prohibited except for specific exceptions related to window displays or proximity to certain interstates, or in specified school/park district settings.
  • Signs painted on exterior walls, roofs, facades, chimneys, or fences are prohibited.
  • Roof signs are prohibited, except those located on the lower plane of a mansard style roof or wall (constructed at an angle of 70 degrees or more), which are considered wall signs.
  • Signs which are of an offensive nature (obscene, patently offensive) are prohibited.
  • Signs placed or painted on vehicles parked primarily for advertising are prohibited.
  • Strobe lights, spotlights, and floodlights for advertising purposes are prohibited.
  • Trailer and portable signs, including those attached to vehicles or trailers to circumvent prohibitions, are prohibited.
  • Balloon signs and signs attached to balloons or other inflatable devices are prohibited.
  • Electronic message board signs are prohibited, except for certain Miscellaneous Information Signs associated with transit agencies as described.
  • Series lighting or neon tubing used to accentuate or trim windows, architectural features, or to outline borders of windows, signs, or buildings is specifically prohibited.
  • Signs shall not be erected or maintained so as to obscure or physically interfere with official traffic control devices, signals, or railroad safety signs, or obstruct/interfere with driver's view at intersections.
  • Signs shall not use words such as STOP, LOOK, DETOUR, DANGER, or similar, or be illuminated in red, green, or amber if in the line of sight with a traffic control device.
  • Randomly affixed signs (e.g., to trees, rocks, utility poles, hydrants, benches, trash receptacles, bridges, sidewalks, or curbs) are prohibited.
  • A-frame (sandwich board) signs are prohibited except as specifically allowed under section 14.6.A.9.

Exempt Signs in Park Ridge

  • The following activities are exempt from sign permit requirements: changing advertising copy or message on an existing changeable copy or similar approved sign; painting, repainting, cleaning, changing permitted items of information, or other normal maintenance and repair of a sign, provided no structural or electrical changes are made.
  • Temporary signs listed in section 14.6.A (subject to the stated criteria/limitations and compliance with all other City regulations): construction and home improvement service signs, directional signs for public events, holiday/special occasion decorations with a non-commercial message, 'For Sale' and 'For Rent' property signs and vehicle signs, garage or yard sale signs, not-for-profit special event signs, political signs or non-commercial messages, temporary window signs (up to 30 days), certain A-frame signs, certain window displays in commercial districts, patio umbrella signs.
  • Permanent signs exempt from permit requirements as listed in section 14.11 (but must comply with stated limitations and code): bulletin boards (for public, charitable or religious institutions not over 12 sq. ft.), directory signs for multi-tenant buildings (not over 6 sq. ft.), flags (governmental or organizational, maximum 4 per lot, max flagpole height 40 ft.), non-internally illuminated house numbers, building identification signs (non-illuminated, max 1 sq. ft., 1 per unit except exceptions for rear/alley), memorial plaques (max 4 sq. ft.), miscellaneous information signs (on pumps, vending boxes, entry/door information, instructions, certain transit schedule/status info, etc.), municipal signs (e.g., traffic, public information/kiosks/legal notices, subject to City Council approval), occupational signs (wall sign, max 1 sq. ft.), warning signs (no trespassing/dumping, max 1.5 sq. ft., up to 4 per lot, more with approval).
  • Permanent directional signs are exempt from permit if they meet the limitations listed in section 14.10.J: only on the property they pertain to, limited content (identification or direction only, no advertising), size (max 6 ft high and 3 sq. ft. per sign for driveway access, max 7 ft high/9 sq. ft. for parking area sign), location, and number.
  • Any sign placed by federal, state, or local government, or authorized by the Zoning Administrator, is exempt from permit as to placement on public property.
  • Signs required to display date of installation, permit number, and voltage are required but this information does not count toward the limit on items of information.

Sign Plan & Submission Notes for Park Ridge

  • A master sign plan is required for a commercial development with multiple tenants where more than one wall, awning, or canopy sign is proposed (see subsection 14.14). The master sign plan must be submitted for review and approval by the Planning and Zoning Commission.
  • The master sign plan must include coordinated design for all building-mounted signs, specifying general appearance, message format, font size and style, lighting, location, construction materials, and may not cover or overhang architectural features.
  • In the case of commercial developments with multiple tenants and more than one wall, awning, or canopy sign proposed, a master sign plan is required (see also 14.9.F.3 regarding general design standards for permanent signs).
  • To obtain sign variances or appeals, an application may be made to the Appearance Commission (for design guideline denials), to the Zoning Board of Appeals (for interpretations), or a variation may be requested under Section 4.4 of the Zoning Ordinance.

Source: municode municipal code