Questions? Call us at (262) 218-2915

Sign Regulations in Princeton, Illinois

Princeton, Illinois has specific sign regulations covering 31 sign types across 9 zoning districts. Regulated sign types include Flag, Address Sign (Freestanding), Address Sign (Wall). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Princeton, Illinois

Sample Sign Requirements in Princeton

Sign TypeMax HeightMax AreaSetback
Temporary Sign (Required by law or public agency)May not exceed height of other temporary signs allowed at the same locationSize may not exceed size of other temporary signs allowed at the same locationNot listed
Small Unpermitted Sign (Non-legible beyond 3 ft from property line)Not listed4 square feetNot listed
Address Sign (Freestanding)4 feet6 square feetNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for PrincetonFull Coverage

Sign Types Covered

31

  • Flag
  • Address Sign (Freestanding)
  • Address Sign (Wall)
  • Residential Identification Sign (Freestanding)
  • +2 more types

Zoning Districts

9

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Princeton, the height limit for Freestanding Sign in the Business Districts is 25'; 6' in B3; up to 70' in B2 within 1500' of interstate. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Princeton require a permit. From the submission notes on this page: Signs regulated by this chapter but not exempted must be erected only after issuance of a permit by the zoning administrator. Application must include detailed drawing(s) showing dimensions, design, structure and location. One application/permit may include multiple signs on the same lot. Run a code check for an exact address to see the permit requirements for that zone.

Princeton's sign code covers 31 sign types, including Flag, Address Sign (Freestanding), Address Sign (Wall), and Residential Identification Sign (Freestanding). Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Signs no larger than four square feet not requiring a building or electrical permit and not legible from more than three feet beyond the property line. The full list is on this page.

In Princeton, Flag in the Single-Family and Two-Family Districts (RE, R1A, R1, R2) must be set back 5 ft from any property line (Sec. 10-7-4C6). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Princeton's sign ordinance that cover digital, changing, or flashing signs: Animated signs are prohibited in all zoning districts. No sign permitted in the public right of way or on public property may bear a commercial message other than one related to a utility or transit service, and may not be animated or lighted unless expressly required by law. Temporary signs required by a valid law or posted by a public agency, provided they are not illuminated or animated, and are removed when no longer serving their purpose. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Princeton Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Princeton, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Princeton, Illinois Sign Rules at a Glance

Princeton, Illinois regulates 31 sign types across 9 zoning districts. Temporary Signs in the Single-Family and Two-Family Districts (RE, R1A, R1, R2) are capped at 4 feet tall and 6 square feet, set back 8 feet from property line. Most commercial signs in Princeton require a permit.

Detailed Sign Ordinance Requirements for Princeton, Illinois

Sign Rules by Zoning District in Princeton (9 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones2May not exceed height of other temporary signs allowed at the same location4 square feetNot listed
Single-Family and Two-Family Districts (RE, R1A, R1, R2)920 feet (flagpole height)32 square feetNot listed
Multi-Family District (R3)1020 feet (flagpole height)32 square feetNot listed
Residential Districts1Not listedNot listedNot listed
Business Districts930 ft. or 4 ft above roof/parapet, whichever is higher400 sq. ft.Not listed
B1 District33 ft.150 sq. ft.Not listed
B2 District430'; 4' above roof/parapet, whichever is higher200 sq. ft.Not listed
B3 District16 ft.24 sq. ft.Not listed
B4 District1Not listed50% or 24 sq. ft. of permitted sign face areaNot listed

Zone-by-Zone Sign Requirements in Princeton(sample of 3 of 9 zones)

Single-Family and Two-Family Districts (RE, R1A, R1, R2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Sign (Freestanding)4 feet6 square feetNot listedNot listed1 per street frontageInside property lineNot listedUnlock10-7-4A1, 10-7-4C1, 10-7-4C4a
Address Sign (Wall)Not listed2 square feetNot listedNot listed1 per dwelling unitOn wallNot listedUnlock10-7-4A1, 10-7-4C1, 10-7-4C4a
Residential Identification Sign (Freestanding)4 feet24 square feetNot listedNot listed1Inside property lineNot listedUnlock10-7-4A1, 10-7-4C1, 10-7-4C4a
Residential Identification Sign (Wall)Not listed1 square footNot listedNot listed1On wallNot listedUnlock10-7-4A1, 10-7-4C1, 10-7-4C4a
Incidental Sign4 feet2 square feetNot listedNot listedNot specifiedInside property lineNot listedUnlock10-7-4A1, 10-7-4C2, 10-7-4C4a
Temporary Sign4 feet6 square feetNot listed8 feet from property line3 per dwelling unit (see conditions)8 feet from property lineNot listedUnlock10-7-4A1, 10-7-4C3, 10-7-4C4a
Institutional Sign (Freestanding)6 feet32 square feetNot listedNot listed1Not listedNot listedUnlock10-7-4A1, 10-7-4C5
Flag20 feet (flagpole height)5 ft x 8 ft per flagNot listed5 ft from any property line1 flagpole per lot, 2 flags per poleMinimum 5 ft setback from property line, no rooftop flagpolesNot listedUnlock10-7-4C6

Multi-Family District (R3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address Sign (Freestanding)4 feet6 square feetNot listedNot listed1 per street frontageInside property lineNot listedUnlock10-7-4B1, 10-7-4C1
Address Sign (Wall)Not listed6 square feetNot listedNot listed1 per dwelling unitOn wallNot listedUnlock10-7-4B1, 10-7-4C1
Residential Identification Sign (Freestanding)4 feet24 square feetNot listedNot listed1 per drivewayInside property lineNot listedUnlock10-7-4B1, 10-7-4C1, 10-7-4C4b
Residential Identification Sign (Wall, per public entrance)Not listed8 square feetNot listedNot listed1 per public entranceOn wall at each public entranceNot listedUnlock10-7-4B1, 10-7-4C1, 10-7-4C4b
Incidental Sign4 feet2 square feetNot listedNot listedNot specifiedInside property lineNot listedUnlock10-7-4B1, 10-7-4C2
Traffic Control SignNot listedSee additional requirementsNot listedNot listedNot specifiedInside property lineNot listedUnlock10-7-4B1
Temporary Sign4 feet6 square feetNot listed8 feet inside property line3 per dwelling unit or 3 per driveway, whichever is less8 feet inside property lineNot listedUnlock10-7-4B1, 10-7-4C3, 10-7-4C4b
Flag20 feet (flagpole height)5 ft x 8 ft per flagNot listed5 ft from any property line1 flagpole per lot, 2 flags per poleMinimum 5 ft setback from property line; no rooftop flagpolesNot listedUnlock10-7-4C6

Business Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listedNot listedNot listedNot listedNot listedOn building wallNot listedUnlock10-7-5, 10-7-5B7, 10-7-5B7f
Freestanding Sign25'; 6' in B3; up to 70' in B2 within 1500' of interstate80 sq. ft.; 24 sq. ft. in B3 district; up to 300 sq. ft. in B2 within 1500' of interstate exit rampNot listedNot listed1 per street frontageInside property lineNot listedUnlock10-7-5, 10-7-5B1, 10-7-5B9, 10-6-10
Window SignNot listed50% of window/door area on a single wallNot listedNot listedNot listedWindow/doorNot listedUnlock10-7-5B11
Awning SignNot listed50% of awning surfaceNot listedNot listedNot listedAffixed flat to awning surface, on buildingNot listedUnlock10-7-5B4
Sandwich Board Sign3 ft.6 sq. ft.Not listedNot listed1 per lotInside property line, not within pedestrianwayNot listedUnlock10-7-5, 10-7-5B5
Advertising Sign30 ft. or 4 ft above roof/parapet, whichever is higher200 sq. ft.10 ft tall x 20 ft wideNot listedNot listedInside property line, not between front building line and streetNot listedUnlock10-7-5, 10-7-5A, 10-7-5A2-5
Shopping Center Sign25 ft.400 sq. ft.Not listedNot listed1 additional per unified developmentWithin property lines, on poleNot listedUnlock10-7-5B6
Flag30' (flagpole height)5'x8' for commercial flags; 2'x4' if mounted on buildingNot listed5 ft from property lineUp to 3 flagpoles per building, 3 flags per poleMin 5 ft from property line; within 30 ft of principal entranceNot listedUnlock10-7-5B10

PermitPal covers all 9 zoning districts in Princeton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Princeton

  • Animated signs are prohibited in all zoning districts.
  • Wind blown signs are prohibited, except temporary banners.
  • Strings of lights are prohibited, except for temporary holiday decorations.
  • Portable signs are prohibited, except sandwich board signs.
  • Vehicles containing a commercial message and regularly parked on the street side of any business are considered portable signs and are prohibited unless the vehicle is regularly and customarily used in the business.
  • Signs on benches are prohibited.
  • Signs on trees are prohibited.
  • Signs on utility poles are prohibited, other than signs installed by the utility and related to the utility facility.
  • Signs blocking required means of egress from any building are prohibited.
  • Roof signs are prohibited.
  • Signs within the public right of way or on public property are prohibited except as allowed in section 10-7-3 or projecting signs in accordance with subsection 10-7-5B2.
  • Any sign not exempt under subsection 10-7-1B, not established as a lawful nonconforming sign per section 10-12-7, or not expressly allowed under another section, is prohibited.
  • No display sign or outdoor advertising device may be placed, erected, altered, rebuilt, enlarged, extended or relocated except in conformity with the provisions of this chapter.
  • No sign permitted in the public right of way or on public property may bear a commercial message other than one related to a utility or transit service, and may not be animated or lighted unless expressly required by law.
  • Any other sign installed or placed in the public right of way is deemed unlawful and subject to immediate removal and penalty.
  • Incidental signs may not bear any commercial message.
  • Permanent signs in residential districts may not bear a commercial message other than one directly related to a business or occupation conducted on the premises lawfully (home occupations excepted).
  • Temporary signs may not bear commercial messages except for specific listed purposes.
  • A flag in residential districts may not bear commercial messages.
  • No rooftop flagpoles are permitted in any district.
  • Marquee and awning signs must not extend beyond the limits of the marquee/awning as regulated.
  • Flashing lights, rapidly changing or intermittent type illumination, rotating beams, beacons or illumination resembling an emergency light are prohibited.
  • Exterior window signs are prohibited; total copy area for window signs may not exceed 50% of window/door area.

Exempt Signs in Princeton

  • Any public notice or warning required by a valid and applicable federal, state or local law, regulation or ordinance, or by order of a court of competent jurisdiction.
  • Any sign inside a building not attached to a window or door and not legible from more than three feet beyond the property line, or any sign not intended to be legible from any street right of way or beyond the property line as determined by the zoning administrator.
  • Traffic control signs on private property, such as 'Stop', 'Yield' and similar signs, that meet the Illinois 'Manual On Uniform Traffic Control Devices' standards and contain no commercial message.
  • Temporary signs required by a valid law or posted by a public agency, provided they are not illuminated or animated, and are removed when no longer serving their purpose.
  • Signs no larger than four square feet not requiring a building or electrical permit and not legible from more than three feet beyond the property line.

Sign Plan & Submission Notes for Princeton

  • Signs regulated by this chapter but not exempted must be erected only after issuance of a permit by the zoning administrator. Application must include detailed drawing(s) showing dimensions, design, structure and location. One application/permit may include multiple signs on the same lot.
  • For advertising signs (billboards) in the B2 district, approval through the special use process (section 10-11-5) is required.
  • Temporary signs require a temporary sign permit specifying duration and are subject to all temporary sign requirements.
  • Electronic message display panels may be permitted for institutional signs in residential districts by variance.
  • Electronic message display panels and manual changeable copy signs are permitted in B2 and B4 districts, subject to specific standards and only as part of a freestanding sign, and only one per zoning lot.