Questions? Call us at (262) 218-2915

Sign Regulations in River Forest, Illinois

River Forest, Illinois has specific sign regulations covering 13 sign types across 5 zoning districts. Regulated sign types include Awning and Canopy Sign, Wall Sign, Monument Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 20, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for River Forest, Illinois

Sample Sign Requirements in River Forest

Sign TypeMax HeightMax AreaSetback
Governmental SignNot listedAs required by law, ordinance, or regulationNot listed
On Site Traffic Directional Sign4 ft (if freestanding)6 sq ftNot listed
Post Sign6 ft6 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for River ForestFull Coverage

Sign Types Covered

13

  • Awning and Canopy Sign
  • Wall Sign
  • Monument Sign
  • Window Sign (Permanent)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In River Forest, the height limit for Monument Sign in the C1 zoning district is 10 ft. The height limit for Wall Sign in the C1 zoning district is 30 ft; first floor only on multi-story buildings. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in River Forest require a permit. From the submission notes on this page: Every sign permit application must be accompanied by plans, specifications, scale drawings, photos of the property, calculations of existing sign area, evidence of a business license, and attestation of compliance. Run a code check for an exact address to see the permit requirements for that zone.

River Forest's sign code covers 13 sign types, including Awning and Canopy Sign, Wall Sign, Monument Sign, and Window Sign (Permanent). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Governmental signs are permitted without a sign permit, subject to size limitations imposed by the relevant law, ordinance, or regulation. The full list is on this page.

In River Forest, Monument Sign in the C1 zoning district must be set back 3 ft from right-of-way, 6 ft from other lot lines. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in River Forest's sign ordinance that cover digital, changing, or flashing signs: No flashing, blinking, or intermittent lights shall be permitted on any sign. Electronic reader boards are prohibited (except as approved as part of a planned development). Moving or animated signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research River Forest Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in River Forest, Illinois, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

River Forest, Illinois Sign Rules at a Glance

River Forest, Illinois regulates 13 sign types across 5 zoning districts. Sandwich Board Signs (C3) in the C3 zoning district are capped at 3.5 ft tall and 6 sq ft (Sec. 4-5-6(D)). Most commercial signs in River Forest require a permit.

Detailed Sign Ordinance Requirements for River Forest, Illinois

Sign Rules by Zoning District in River Forest (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones56 ft30% of window area in which exhibitedNot listed
C1530 ft; first floor only on multi-story buildings80 sq ft per sign faceNot listed
C2, PRI530 ft; first floor only on multi-story buildings80 sq ft per sign faceNot listed
C3530 ft; first floor only on multi-story buildings60 sq ft per sign face; no more than 5% of wall to which affixed (individual tenant in multi-tenant bldg.)Not listed
ORIC330 ft100 sq ft per sign face; total 200 sq ftNot listed

Zone-by-Zone Sign Requirements in River Forest(sample of 3 of 5 zones)

C1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning and Canopy Sign20 ft; minimum 8 ft above grade60 sq ft per sign face; no more than 5% of wall to which affixed (individual tenant in multi-tenant bldg.)Not listedNot listedOne per zoning lot frontage/single tenant; or one per ground floor business tenantAffixed to awning or canopy on buildingNot listedUnlock4-5-8(A)(2), (C)(2)(a), (D)(2), (F)(2)
Monument Sign10 ft80 sq ft per sign faceNot listed3 ft from right-of-way, 6 ft from other lot lines; must be outside sight trianglesOne per lotFreestanding on lotNot listedUnlock4-5-8(A)(3), (C)(2)(b), (D)(3), (E)(2), (F)(3)
Pylon Sign20 ft (or height of primary structure/service area canopy for gas stations, whichever is less)80 sq ft per sign faceNot listed3 ft from right-of-way, 6 ft from all other lot lines; outside sight trianglesOne per lot (in lieu of monument sign)Freestanding on lotNot listedUnlock4-5-8(A)(4), (C)(2)(c), (D)(4), (E)(3), (F)(4)
Wall Sign30 ft; first floor only on multi-story buildings80 sq ft per sign or not more than 5% of wall to which affixed, whichever is lessNot listedNot listedOne per frontage for single ground floor tenant or one per ground floor tenantOn wall of building; first floor only on multi-story buildingsNot listedUnlock4-5-8(A)(6), (C)(2)(d), (D)(5), (F)(5)
Window Sign (Permanent)Not listed25% of any individual window frame (in aggregate with temporary window signs)Not listedNot listedNot listedWithin windowNot listedUnlock4-5-8(A)(7), (C)(2)(e), (F)(6)

C2, PRI

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning and Canopy Sign20 ft; minimum 8 ft above grade60 sq ft per sign face; no more than 5% of wall to which affixed (individual tenant in multi-tenant bldg.)Not listedNot listedOne per zoning lot frontage/single tenant; or one per ground floor business tenantAffixed to awning or canopy on buildingNot listedUnlock4-5-9(A)(2), (C)(2)(a), (D)(2), (F)(2)
Monument Sign10 ft80 sq ft per sign faceNot listed3 ft from right-of-way, 5 ft from all other lot lines; outside sight trianglesOne per lotFreestanding on lotNot listedUnlock4-5-9(A)(3), (C)(2)(b), (D)(3), (E)(2), (F)(3)
Wall Sign30 ft; first floor only on multi-story buildings60 sq ft per sign or not more than 5% of wall to which affixed, whichever is lessNot listedNot listedOne per frontage for single ground floor tenant or one per ground floor tenantOn wall of building; first floor only on multi-story buildingsNot listedUnlock4-5-9(A)(5), (C)(2)(c), (D)(4), (F)(4)
Window Sign (Permanent)Not listed25% of any individual window frame (in aggregate with temporary window signs)Not listedNot listedNot listedWithin windowNot listedUnlock4-5-9(A)(6), (C)(2)(d), (F)(5)
Sandwich Board Sign (PRI)3.5 ft6 sq ftNot listedNot listedNot listedPlaced so as to preserve a min. 3 ft sidewalk width and not block ingress/egress. In PRI: only for special event wayfinding, to provide for the safe and efficient movement of people and vehicles.Not listedUnlock4-5-6(D)

C3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning and Canopy Sign20 ft; minimum 8 ft above grade60 sq ft per sign face; no more than 5% of wall to which affixed (individual tenant in multi-tenant bldg.)Not listedNot listedOne per zoning lot frontage/single tenant; or one per ground floor business tenantAffixed to awning or canopy on buildingNot listedUnlock4-5-10(A)(2), (C)(2)(a), (D)(2), (F)(2)
Projecting Sign12 ft maximum, may not extend above roofline; minimum 8 ft clearance to grade4.5 sq ft per sign faceNot listedNot listedOne per lot frontage or one per tenantOn building, projects perpendicular to facadeNot listedUnlock4-5-10(A)(3), (C)(2)(b), (D)(3), (E)(2), (F)(3)
Wall Sign30 ft; first floor only on multi-story buildings60 sq ft per sign or not more than 5% of wall to which affixed, whichever is lessNot listedNot listedOne per frontage for single ground floor tenant or one per ground floor tenantOn wall of building; first floor only on multi-story buildingsNot listedUnlock4-5-10(A)(5), (C)(2)(c), (D)(4), (F)(4)
Window Sign (Permanent)Not listed25% of any individual window frame (in aggregate with temporary window signs)Not listedNot listedNot listedWithin windowNot listedUnlock4-5-10(A)(6), (C)(2)(d), (F)(5)
Sandwich Board Sign (C3)3.5 ft6 sq ftNot listedNot listedNot listedWithin 1 ft of wall of building/unit, no less than 3 ft and no more than 6 ft from building entrance, with at least 3 ft of sidewalk width preserved, not blocking ingress or egress.Not listedUnlock4-5-6(D)

PermitPal covers all 5 zoning districts in River Forest. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in River Forest

  • Any sign not expressly permitted by these regulations is prohibited.
  • No sign shall obstruct free ingress to or egress from a fire escape, door, window, or other required accessway.
  • No sign shall project over, occupy, or obstruct any window surface required for light or ventilation by any applicable provision of this code.
  • No sign may be maintained at any location where, by reason of its position, size, shape, content, color or illumination, it may obstruct or be confused with traffic control devices.
  • No sign other than a supporting pole or brace (no greater than eighteen inches in width or diameter) shall be located lower than eight feet from grade within any sight triangle.
  • No sign except governmental signs authorized in this chapter shall be placed in or extend into or over any public property or right-of-way.
  • No sign shall be located so as to create a nuisance or a threat to public safety and welfare.
  • Erecting or maintaining a sign in a manner inconsistent with the provisions of this chapter is unlawful and declared a nuisance.
  • No flashing, blinking, or intermittent lights shall be permitted on any sign.
  • Box signs are prohibited.
  • Electronic reader boards are prohibited (except as approved as part of a planned development).
  • Moving or animated signs are prohibited.
  • Off-premises signs are prohibited (except as approved as part of a planned development).
  • Outline lighting is prohibited.
  • Portable signs are prohibited.
  • Roof signs are prohibited.
  • Temporary signs are prohibited except as expressly authorized in this chapter and when approved in connection with temporary uses.
  • Vehicle/trailer signs are prohibited.
  • Any sign on a tree, utility pole or light pole, whether on public or private property, is prohibited (except municipal/government banners appropriately approved and mounted).
  • Any sign on public property is prohibited, except governmental signs and signs in the PRI district authorized in this chapter.
  • Any sign painted directly on a wall, roof or fence is prohibited.
  • Any ground sign (or portion of a sign) existing at a height of more than fifteen feet above the grade of an adjacent residential district is prohibited.
  • Construction signs in residential neighborhoods are prohibited other than the sign or permit placard required by the village.

Exempt Signs in River Forest

  • Governmental signs are permitted without a sign permit, subject to size limitations imposed by the relevant law, ordinance, or regulation.
  • On-site traffic directional signs (limited to wall or freestanding signs of not more than six square feet in area and, if freestanding, not more than four feet in height, and illuminated only as necessary) are permitted without a sign permit.
  • Post signs (freestanding, mounted in the ground with one or no more than two poles or stakes, max six square feet in area and six feet in height; illumination prohibited; one per property for up to 180 days/year, with possible extension) are permitted without a sign permit.
  • Sandwich board signs (permitted in C3 and PRI Districts only, max six square feet and three and one half feet in height; specific location and time limits apply) are permitted without a sign permit.
  • Yard signs (freestanding, not more than six square feet and three feet in height; illumination prohibited; max four displayed concurrently) are permitted without a sign permit.
  • Temporary window signs (aggregate area not to exceed thirty percent of the window area, cannot block required window area; illumination prohibited) are permitted without a sign permit.

Sign Plan & Submission Notes for River Forest

  • A sign permit is required for any sign unless expressly permitted without a permit according to Section 4-5-6.
  • Every sign permit application must be accompanied by plans, specifications, scale drawings, photos of the property, calculations of existing sign area, evidence of a business license, and attestation of compliance.
  • Evidence of the structural integrity and safety of the sign design and installation (by licensed architect, engineer, or sign manufacturer/installer) is required for each sign permit application.
  • A separate temporary sign permit application is required for each temporary sign (Section 4-5-12).
  • Variations from the sign regulations may require approval from the Zoning Administrator (minor), the Zoning Board of Appeals (major), or may be included in a planned development approval.
  • Planned developments may include relief from any of the requirements of the sign ordinance.
  • Temporary construction fence wrap signs require approval by the Zoning Administrator and may have specific conditions imposed.
  • For multi-tenant lots, the lot owner is responsible for sign allocation among users.