Sign Regulations in Sleepy Hollow, Illinois
Sleepy Hollow, Illinois has specific sign regulations covering 15 sign types across 2 zoning districts. Regulated sign types include Wall Sign, Wall Sign (Fronts Directly on State Route 72, Single Business), Wall Sign (Faces State Route 72, Multiple Businesses). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Sleepy Hollow, Illinois
Sample Sign Requirements in Sleepy Hollow
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign | No higher than the maximum permitted building height, nor more than 3 ft above highest ceiling elevation in building | 200 sq ft | Not listed |
| Wall Sign (Fronts Directly on State Route 72, Single Business) | No higher than maximum permitted building height or 3 ft above highest ceiling elevation | 200 sq ft per sign | Not listed |
| Wall Sign (Faces State Route 72, Multiple Businesses) | No higher than maximum permitted building height or more than 3 ft above highest ceiling elevation | 200 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
15
- Wall Sign
- Wall Sign (Fronts Directly on State Route 72, Single Business)
- Wall Sign (Faces State Route 72, Multiple Businesses)
- Window Sign (Permanent)
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Sleepy Hollow
Other Cities in Illinois
Frequently Asked Questions
In Sleepy Hollow, the height limit for Freestanding Structural Sign (Multi-Occupant Commercial Building) in the B-1 business district, B-2 village business district is 8 ft (Sec. 8-5-10(D)(3)(c)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Sleepy Hollow require a permit. We haven't published Sleepy Hollow's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Sleepy Hollow's sign code covers 15 sign types, including Wall Sign, Wall Sign (Fronts Directly on State Route 72, Single Business), Wall Sign (Faces State Route 72, Multiple Businesses), and Window Sign (Permanent). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Street entrance identification signs shall be used as required. The full list is on this page.
We haven't published Sleepy Hollow's sign setback rules on this page yet. Run a code check for an exact address to see them.
Rules in Sleepy Hollow's sign ordinance that cover digital, changing, or flashing signs: No freestanding sign of any kind shall be flashing, electronically or electrically moving, or physically moving (twisting, turning or waving through motorized or natural forces) in the B-1 and B-2 business districts. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Sleepy Hollow Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Sleepy Hollow, Illinois, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Sleepy Hollow, Illinois Sign Rules at a Glance
Sleepy Hollow, Illinois regulates 15 sign types across 2 zoning districts. Freestanding Structural Signs (Multi-Occupant Commercial Building) in the B-1 business district, B-2 village business district are capped at 8 ft tall, 60 sq ft, and 12 ft wide (Sec. 8-5-10(D)(3)(c)). Most commercial signs in Sleepy Hollow require a permit.
Detailed Sign Ordinance Requirements for Sleepy Hollow, Illinois
Sign Rules by Zoning District in Sleepy Hollow (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| B-1 business district, B-2 village business district | 14 | 30 ft | 350 sq ft (feature), 225 sq ft (entrance) | Not listed |
| B-3 commercial and mixed use district | 1 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Sleepy Hollow
B-1 business district, B-2 village business district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | No higher than the maximum permitted building height, nor more than 3 ft above highest ceiling elevation in building | 200 sq ft | Not listed | Not listed | One per building except for exceptions listed. | On exterior walls of building. Multiple wall signs allowed as described on buildings fronting/facing Route 72 as outlined. | Not listed | Unlock | Sec. 8-5-10(D)(1) |
| Wall Sign (Fronts Directly on State Route 72, Single Business) | No higher than maximum permitted building height or 3 ft above highest ceiling elevation | 200 sq ft per sign | Not listed | Not listed | Max 3 per building | On walls; facing Route 72. | Not listed | Unlock | Sec. 8-5-10(D)(1)(c)(1) |
| Wall Sign (Faces State Route 72, Multiple Businesses) | No higher than maximum permitted building height or more than 3 ft above highest ceiling elevation | 200 sq ft | Not listed | Not listed | Max 1 per business on building | Face of building with each business's main entrance. | Not listed | Unlock | Sec. 8-5-10(D)(1)(c)(2) |
| Freestanding Structural Sign (Office Parks >150,000 sq ft building) | 6 ft | 60 sq ft (per face) | Not listed | Not listed | 1 per building >150,000 sq ft | On office park property, for buildings >150,000 sq ft | Not listed | Unlock | Sec. 8-5-10(D)(3)(a)-(b) |
| Freestanding Structural Sign (Multi-Occupant Commercial Building) | 8 ft | 60 sq ft | 12 ft | Not listed | 1 per multi-tenant building | On property of multi-occupant, inline commercial buildings | Not listed | Unlock | Sec. 8-5-10(D)(3)(c) |
| Temporary Real Estate/Leasing Sign | 12 ft | 72 sq ft per face | Not listed | Not listed | 1 per project entrance | At project entrance(s) | Not listed | Unlock | Sec. 8-5-10(C)(1) |
| Temporary Construction Sign | 12 ft | 36 sq ft | Not listed | Not listed | 1 per building under construction | On building or within 20 ft of building under construction | Not listed | Unlock | Sec. 8-5-10(C)(2) |
| Traffic Directional Sign | 4 ft | 9 sq ft | Not listed | Not listed | As required | At traffic flow/ingress/egress points | Not listed | Unlock | Sec. 8-5-10(E)(1)-(2) |
B-3 commercial and mixed use district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| All Permanent Signs | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Sec. 8-5-10, paragraph 2 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Sleepy Hollow with a free PermitPal account.
Run a free code checkProhibited Signs in Sleepy Hollow
- No freestanding sign of any kind shall be flashing, electronically or electrically moving, or physically moving (twisting, turning or waving through motorized or natural forces) in the B-1 and B-2 business districts.
- No pennants or other such attention seeking devices shall be employed with any freestanding sign in the B-1 and B-2 business districts.
- No gas illuminated signs (except as permitted for window display) shall be allowed in the B-1 and B-2 business districts.
- No sign shall be attached to a roof except those mounted to the roof and not extending higher than the roofline and meeting all other sign regulations.
- No signs shall be located along any side or rear lot line within a required buffer yard.
Exempt Signs in Sleepy Hollow
- Gas illuminated signs are allowed for window display only, subject to specific limitations.
- Temporary real estate and realtor signs advertising premises for sale, rental, or lease are permitted during the course of construction, with restrictions.
- Temporary construction signs denoting architect, engineer, or contractor are permitted during construction under set conditions.
- Permanent address signs up to six square feet are permitted for each building.
- Traffic directional signs are allowed up to nine square feet and four feet in height.
- Street entrance identification signs shall be used as required.
Sign Plan & Submission Notes for Sleepy Hollow
- In the B-3 commercial and mixed use district, signs shall be subject to review and recommendation by the planning and zoning commission and approval by the board of trustees of a signage plan to be submitted at the time of application to classify a property or properties in the B-3 district, or at the time of submitting a development plan for the property thereafter.
- All permanent signs shall be reviewed by the village planning and zoning commission for coordination of color and design with surrounding signage.
- Architectural features (single architectural or entrance features) are subject to architectural review by the planning and zoning commission.
- Variations for larger architectural features may be permitted, subject to review and recommendation by the planning and zoning commission and approval by the village board of trustees.
Source: municode municipal code