Sign Regulations in Walnut, Illinois

Walnut, Illinois has specific sign regulations covering 23 sign types across 6 zoning districts. Regulated sign types include Business Sign, Temporary Sign (Business), Integrated Development Sign (Business/Shopping Centers). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 9, 2025

Sign Regulation Overview for Walnut, Illinois

Sample Sign Requirements in Walnut

Sign TypeMax HeightMax AreaSetback
General Sign200 square feetMinimum 10 ft from ROW; 50 ft from rear/side of abutting residential district if sign faces that lot line (5.31-3, 5.31-6)
Roof SignMust not exceed maximum height limit of structures in district
Integrated Development Sign (All zones, where applicable)125 square feet per sign25 ft from ROW

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for WalnutFull Coverage

Sign Types Covered

23

  • Business Sign
  • Temporary Sign (Business)
  • Integrated Development Sign (Business/Shopping Centers)
  • General Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Walnut

Frequently Asked Questions

Sign height limits in Walnut vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Walnut, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Walnut, regulated sign types include Business Sign, Temporary Sign (Business), Integrated Development Sign (Business/Shopping Centers), General Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Walnut vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Walnut are regulated with specific requirements for brightness, animation, and message duration. Walnut has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Walnut Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Walnut, Illinois sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Walnut, Illinois Sign Rules at a Glance

Walnut, Illinois regulates 23 sign types across 6 zoning districts. Church Bulletin Boards in the Residential districts zoning district are capped at 15 feet or one story above curb (whichever is less) tall and 18 square feet, with a May not project into public right-of-way setback (Sec. 5.45). Most commercial signs in Walnut require a permit.

Detailed Sign Ordinance Requirements for Walnut, Illinois

Sign Rules by Zoning District in Walnut (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones6Must not exceed maximum height limit of structures in district200 square feet
Residential districts815 feet or one story above curb (whichever is less)320 square feet (total of 2 signs)
B-1 Business District420 feet above curb level, but not above parapet500 square feet (total all signs)
B-2 Business District430 ft above curb level; not above parapet300 square feet (total for all signs)
Manufacturing districts430 ft above curb level; not above parapet300 square feet (total for all signs)
Central Business District1125 square feet

Zone-by-Zone Sign Requirements in Walnut(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
General Sign200 square feetMinimum 10 ft from ROW; 50 ft from rear/side of abutting residential district if sign faces that lot line (5.31-3, 5.31-6)Entirely within property lines; Setbacks as per section 5.31-3 and 5.31-6Unlock5.2, 5.3 (various)
Roof SignMust not exceed maximum height limit of structures in districtWhen permitted (district-specific); cannot extend overhang or beyond exterior wallUnlock5.31-4
Marquee/Canopy SignAffixed flat to surface, not to extend past limits except lettersUnlock5.33-1
Awning SignAffixed flat to surface; only name/address of establishment allowedUnlock5.33-2
Integrated Development Sign (All zones, where applicable)125 square feet per sign25 ft from ROWOne per street frontageOne per street; must face streetUnlock5.34
Temporary Sign (General)Unlock5.35-3

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate (Residential districts)1 square foot per dwelling unitOne per dwelling unitUnlock5.41
Identification Sign (Multifamily/Office)5 square feetOne per building; on corner lot, two (one for each street)At building or entranceUnlock5.42
Subdivision Entrance Identification Sign5 square feetOne per entranceAt each entrance to subdivisionUnlock5.43
Parking Area Identification Sign5 square feetOne per entrance/exitAt each entrance/exit of parking areaUnlock5.44
Church Bulletin Board15 feet or one story above curb (whichever is less)18 square feetMay not project into public right-of-wayOne per church; two if corner lotUnlock5.45
Temporary Sign (Residential districts) - Option 112 square feetOne per lot frontageEach lot frontageUnlock5.35-1
Temporary Sign (Residential districts) - Option 2 (tracts 20 acres+)320 square feet (total of 2 signs)Two per 20+ acre tractTracts of 20 acres or moreUnlock5.35-1
Integrated Development Sign (Residential)125 square feet25 ft from ROWOne per streetFacing each street (apartment developments, per 5.34)Unlock5.34

B-1 Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Business Sign20 feet above curb level, but not above parapet500 square feet (total all signs)Maximum 2 per businessFronts principal street, parking area or up to 50 ft on side street wall (if corner building)Unlock5.51-1, 5.51-2, 5.51-3, 5.51-4, 5.51-5
Marquee/Canopy/Awning Sign (B-1)See General zone regulations (5.33)Unlock5.51-4, 5.33
Temporary Sign (Business)64 square feet (for <50 ft frontage), OR 1.25 sq ft per linear street frontage to MAX total area 320 sq ft (whichever is less, for >50 ft frontage)One per lot frontageEach lot frontageUnlock5.35-2, 5.35-3
Integrated Development Sign (Business/Shopping Centers)125 square feet25 ft from ROWOne per streetOne per streetUnlock5.34

PermitPal covers all 6 zoning districts in Walnut — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 6 zones for Walnut — start free

Prohibited Signs in Walnut

  • No sign or sign structure shall be placed on private or public property without the written consent of the owner or agent thereof.
  • No sign or sign structure other than official highway markers shall be placed upon any street or highway right-of-way.
  • Sign structures or columns shall be set back a minimum of ten feet from the right-of-way line.
  • Roof signs or sign structures, when permitted, shall not exceed the maximum height limit of structures in the district in which they are located, nor extend beyond or overhang any exterior wall of the building upon which secured.
  • Signs, clocks or other advertising devices erected upon standards or separate supports shall be placed so as to be entirely within the property lines of the premises upon which they are located.
  • No sign or sign structure shall be erected at any location where it may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device.
  • No rotating beam, beacon or flashing illuminations resembling an emergency light shall be used in connection with any sign display.
  • No sign or sign structure shall be located in such a manner as to materially impede the view of any street or highway intersection.
  • No sign or sign structure shall be located in such a manner as to materially impede the view of the intersection of a street or highway with a railroad grade crossing.
  • Flags, pennants or bunting shall not be permitted except to announce the opening of a new business or industry (subject to permit and duration limits).
  • All signs shall comply with local ordinances regulating the structural design and maintenance of the sign or signs and supporting members.

Exempt Signs in Walnut

  • Signs required or erected by governmental agencies shall be exempt from the requirements of this article.

Sign Plan & Submission Notes for Walnut

  • There is no indication in this ordinance text that a master sign plan, sign plan, or variance meeting is required for signs.

Source: municode municipal code