Questions? Call us at (262) 218-2915

Sign Regulations in Greensburg, Indiana

Greensburg, Indiana has specific sign regulations covering 29 sign types across 6 zoning districts. Regulated sign types include Permanent Awning Signs, Permanent Projecting Signs, Permanent Wall Signs. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: December 1, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Greensburg, Indiana

Sample Sign Requirements in Greensburg

Sign TypeMax HeightMax AreaSetback
Election Period Temporary Signs (All Types)Not listedUp to 32 sq ft per sign during the election periodSigns shall not be placed within right-of-way.
Sign Structure Height Limits by Street TypePrincipal Arterial: 30 ft; Major Collector: 20 ft; Minor Arterial: 15 ft; Local Street: 6 ft (height measured from ground to bottom of sign face)Not listedNot listed
Temporary Monument / Pole / Suspended Signs5 ft overall height16 sq ft per sign faceMust not be located within vision clearance triangle; must not be in ROW or easement unless approved sign easement; minimum 10 ft from back of any street curb or edge of pavement in public ROW, and under no circumstances permitted unless entire sign structure is at least 2 ft from any public ROW.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for GreensburgFull Coverage

Sign Types Covered

29

  • Permanent Awning Signs
  • Permanent Projecting Signs
  • Permanent Wall Signs
  • Permanent Window Signs
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Greensburg

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Greensburg, the height limit for Permanent Monument Signs in the Neighborhood Business District (B-N) and other zoning districts is 10 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Greensburg require a permit. From the submission notes on this page: The ordinance excerpt provided does not mention a Master Sign Plan, comprehensive sign plan, or special sign variance procedure by name; any such requirements, if they exist, would be in sections not included in this text. Run a code check for an exact address to see the permit requirements for that zone.

Greensburg's sign code covers 29 sign types, including Permanent Awning Signs, Permanent Projecting Signs, Permanent Wall Signs, and Permanent Window Signs. Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Street address signs used to provide adequate property identification are exempt from all provisions of Section 3.I, Sign Standards. The full list is on this page.

In Greensburg, Temporary Ground Signs (Non-residential) in the Neighborhood Business District (B-N) and other zoning districts must be set back at least 10 ft from back of curb or edge of pavement within public right-of-way. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Greensburg's sign ordinance that cover digital, changing, or flashing signs: No illuminated sign may use blinking, flashing, or fluttering lights, or any device with changing light intensity, brightness, or color, or that gives such an illusion. All electronic signs within one hundred fifty (150) feet and visible from a residential property must remain static between 11:00 p.m. and 5:00 a.m. daily. Permanent inflatable, animated, or moving signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Greensburg Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Greensburg, Indiana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Greensburg, Indiana Sign Rules at a Glance

Greensburg, Indiana regulates 29 sign types across 6 zoning districts. Permanent Pole Signs in the Conservation District (C-1), Institutional District (IN-1) are capped at 5 ft tall and 16 sq ft per side. Most commercial signs in Greensburg require a permit.

Detailed Sign Ordinance Requirements for Greensburg, Indiana

Sign Rules by Zoning District in Greensburg (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones11Principal Arterial: 30 ft; Major Collector: 20 ft; Minor Arterial: 15 ft; Local Street: 6 ft (height measured from ground to bottom of sign face)Up to 32 sq ft per sign during the election periodNot listed
One-Family Residential District (R-1), One-Family or Two-Family Residential District (R-2), Low-Density Multi-Family Residential District (R-3), Medium-Density Multi-Family Residential District (R-4)45 ft overall height32 sq ft per sign faceNot listed
Conservation District (C-1), Institutional District (IN-1)78 ftTotal message area of all sign facings per lot not to exceed 125 sq ftNot listed
Central Business District (B-1)5Not listed50 sq ftNot listed
Neighborhood Business District (B-N), General Business District (B-2), Heavy Commercial District (B-3), Light Industrial District (I-1), Heavy Industrial District (I-2)1115 ft50 sq ftNot listed
Historic Zoning District1Not listedNot listedNot listed

Zone-by-Zone Sign Requirements in Greensburg(sample of 3 of 6 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
All Sign Types - General Permit RequirementNot listedNot listedNot listedNot listedNot listedAll zoning districtsNot listedUnlockSec. 3.I.2, Permit Required.
All Sign Types - InspectionNot listedNot listedNot listedNot listedNot listedAll zoning districtsNot listedUnlockSec. 3.I.3, Inspection.
All Sign Types - Removal of Non-compliant SignsNot listedNot listedNot listedNot listedNot listedAll zoning districtsNot listedUnlockSec. 3.I.4.a–b.
All Sign Types - MaintenanceNot listedNot listedNot listedNot listedNot listedAll zoning districtsNot listedUnlockSec. 3.I.5.
All Sign Types - Abandoned SignsNot listedNot listedNot listedNot listedNot listedAll zoning districtsNot listedUnlockSec. 3.I.6, Abandoned Signs.
Temporary Electronic Variable Message Signs (EVMS) - All ZonesNot listedNot listedNot listedNot listedNot listedAll zoning districts, subject to additional distance limits from residential districtsNot listedUnlockSec. 3.I.7.a–i.
Election Period Temporary Signs (All Types)Not listedUp to 32 sq ft per sign during the election periodNot listedSigns shall not be placed within right-of-way.No limit stated during election period, provided each sign does not exceed 32 sq ft.Private property only; signs not allowed in public right-of-wayNot listedUnlockSec. 3.I.10, Exceptions During Election Timeframe.
Sign Structure Height Limits by Street TypePrincipal Arterial: 30 ft; Major Collector: 20 ft; Minor Arterial: 15 ft; Local Street: 6 ft (height measured from ground to bottom of sign face)Not listedNot listedNot listedNot listedAll zoning districts; applied based on abutting street functional classificationNot listedUnlockSec. 3.I.13.a–c.

Conservation District (C-1), Institutional District (IN-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Awning SignsNot listed25 sq ft per sign faceNot listedNot listedOne sign per each window and each door.On the primary structure on lots in C-1 and IN-1Not listedUnlockSec. 3.I.17; Table 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Permanent Awning Signs.
Permanent Monument Signs8 ft48 sq ft message area per sideNot listedNot within vision clearance triangle; minimum 10 ft from back of any street curb or edge of pavement within a public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) sign per each vehicular entrance on each street with access. Overall lot also limited by general freestanding sign cap in Sec. 3.I.17.b.ii (max 2 ground signs per lot, monument and/or pole combined).At vehicular entrances on lots in C-1 and IN-1Not listedUnlockSec. 3.I.17.b.i–iii; Table 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Monument Signs; additional text following table (Quantity/Placement/Additional Standards).
Permanent Pole Signs5 ft16 sq ft per sideNot listedNot within vision clearance triangle; minimum 10 ft from back of any street curb or edge of pavement within public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) sign per lot; also subject to overall cap of two (2) ground signs per lot per Sec. 3.I.17.b.ii.On lots in C-1 and IN-1Not listedUnlockTable 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Permanent Pole Signs (size, quantity, placement, additional standards).
Permanent Projecting SignsNot listed12 sq ft per sideNot listedNot listedOne (1) per awning or other overhanging attachment.On the primary structure in C-1 and IN-1Not listedUnlockTable 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Permanent Projecting Signs.
Permanent Wall SignsNot listed50 sq ftNot listedNot listedOne (1) per building.On the primary structure in C-1 and IN-1Not listedUnlockTable 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Permanent Wall Signs.
Permanent Window SignsNot listedNon-illuminated: may cover up to 25% of each window area without counting toward total sign area; illuminated: counted toward total sign area (no specific sq ft cap in this table, but subject to cumulative area limit of Sec. 3.I.17.b.i).Not listedNot listedNot numerically capped; non-illuminated limited by 25% of each window and by window frame/area.On permanent structure/windows in C-1 and IN-1Not listedUnlockTable 3.12, Permanent Signs in the Conservation (C-1) and Institutional (IN-1) District – Permanent Window Signs.
All Permanent Signs - C-1 and IN-1 Cumulative and Freestanding LimitsNot listedTotal message area of all sign facings per lot not to exceed 125 sq ftNot listedNot listedMaximum two ground signs per lot (combined monument and pole).Lots in Conservation (C-1) and Institutional (IN-1) districtsNot listedUnlockSec. 3.I.17.a–b.i–iii.

Neighborhood Business District (B-N), General Business District (B-2), Heavy Commercial District (B-3), Light Industrial District (I-1), Heavy Industrial District (I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Awning SignsNot listed50 sq ftNot listedNot listedOne sign per each window and each door.On the primary structure in B-N, B-2, B-3, I-1, I-2Not listedUnlockSec. 3.I.19.a–b; Table 3.14, Permanent Signs in the Business and Industrial Districts – Permanent Awning Signs.
Permanent Monument Signs10 ft48 sq ft message area per sideNot listedNot within vision clearance triangle; minimum 10 ft from back of any street curb or edge of pavement within a public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) monument sign per lot, subject to overall ground sign cap (see additional standards for the district).On lots in B-N, B-2, B-3, I-1, I-2Not listedUnlockTable 3.14, Permanent Signs in the Business and Industrial Districts – Permanent Monument Signs.
Permanent Pole Signs5 ft16 sq ft per sideNot listedNot within vision clearance triangle; minimum 10 ft from back of any street curb or edge of pavement within a public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) pole sign per lot, subject to overall ground sign cap (see district additional standards).On lots in B-N, B-2, B-3, I-1, I-2Not listedUnlockTable 3.14, Permanent Signs in the Business and Industrial Districts – Permanent Pole Signs.
Permanent Projecting SignsNot listed12 sq ft per sideNot listedNot listedOne (1) per awning or other attached overhang.On the primary structure in B-N, B-2, B-3, I-1, I-2Not listedUnlockTable 3.14, Permanent Signs in the Business and Industrial Districts – Permanent Projecting Signs.
Permanent Suspended Signs4 ft sign height4 sq ft per sideNot listedMinimum 10 ft from back of any street curb or edge of pavement within a public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) sign per lot.On lots in B-N, B-2, B-3, I-1, I-2Not listedUnlockTable 3.14, Permanent Signs in the Business and Industrial Districts – Permanent Suspended Signs.
Temporary Attention-seeking Signs (Non-residential)15 ft32 sq ft per sign face; 15 ft overall heightNot listedMust not be in vision clearance triangle; must be at least 10 ft from back of curb or edge of pavement within public ROW; entire sign structure must be at least 2 ft from any public ROW.Two (2) per street frontage.On lots in non-residential districts C-1, B-N, B-1, B-2, B-3, IN-1, I-1, I-2 (but user-specified zone list focuses on B-N, B-2, B-3, I-1, I-2; C-1 and IN-1 also included here by ordinance)Not listedUnlockSec. 3.I.15; Table 3.10, Temporary Signs in Non-residential Districts – Temporary Attention-seeking Signs (size, quantity, duration) and general notes.
Temporary Ground Signs (Non-residential)Not listed32 sq ft per sign faceNot listedAt least 10 ft from back of curb or edge of pavement within public ROW; entire sign structure must be at least 2 ft from any public ROW; must not be in vision clearance triangle.Two (2) per street frontage.On lots in non-residential districts C-1, B-N, B-1, B-2, B-3, IN-1, I-1, I-2Not listedUnlockSec. 3.I.15; Table 3.10, Temporary Signs in Non-residential Districts – Temporary Ground Signs and shared “Additional Standards”.
Temporary Portable Signs (Non-residential)6 ft32 sq ft per sign face; 6 ft overall heightNot listedMust not be located within vision clearance triangle; must be minimum 10 ft from back of any street curb or edge of pavement within public ROW; entire sign structure must be at least 2 ft from any public ROW.One (1) per street frontage; multi-tenant sites as determined by Administrator.On lots in non-residential districts C-1, B-N, B-1, B-2, B-3, IN-1, I-1, I-2Not listedUnlockTable 3.10, Temporary Signs in Non-residential Districts – Temporary Portable Signs.

PermitPal covers all 6 zoning districts in Greensburg. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Greensburg

  • It is unlawful for any person to erect, construct, enlarge, move, or convert any sign, or change the permanent copy on an on-premise permanent existing sign structure, or cause the same to be done, without first obtaining an Improvement Location Permit (ILP), except where otherwise expressly exempted in the ordinance.
  • Any permanent or temporary sign erected or maintained in violation of the Unified Development Ordinance (UDO) is subject to removal by the Administrator.
  • All signs and components must be kept in good repair and in safe, neat, clean, and attractive condition; failure to maintain a sign triggers enforcement under Chapter 9 of the UDO.
  • All signs, their mountings, and related components for a business must be removed within one (1) year after a business is no longer conducted on the premises.
  • All temporary Electronic Variable Message Signs (EVMS) must: (a) not have moving, flashing, or scrolling messages; (b) keep each message static for at least eight (8) seconds; (c) have an automatic dimmer/photocell sensor that is always activated and keeps luminance within the specified nit limits; (d) not create a traffic hazard; and (e) be directed away from surrounding properties so that light is not objectionable or a nuisance.
  • No EVMS may be located within one hundred fifty (150) feet of a residential zoning district (R-1, R-2, R-3, or R-4).
  • All electrical wiring for permanent EVMS must be in conduit; sign electrical service must include a readily accessible disconnecting switch so the Administrator can shut off the sign if it presents an immediate threat to public safety or violates other local ordinances.
  • All sign illumination must comply with the State Electrical Code as adopted and amended by the State of Indiana.
  • No illuminated sign may use blinking, flashing, or fluttering lights, or any device with changing light intensity, brightness, or color, or that gives such an illusion.
  • Illuminating elements for signs must be kept in satisfactory working condition, and damaged or burned-out elements must be repaired within seven (7) days after the issue is brought to the owner’s attention.
  • All electrical wiring for permanent signs must be in conduit, with no exposed wires to exterior elements, and must have a readily accessible disconnecting switch that the Administrator can require to be used if the sign presents an immediate threat to public safety.
  • Sign lighting (direct or reflected) must not create a traffic hazard to operators of motor vehicles on public or private roadways.
  • Light from any illuminated sign must be shaded, shielded, or directed so it is not objectionable to surrounding properties and does not shine directly onto adjacent property.
  • Internally illuminated signs should be composed of individual letters or shapes, or light lettering/symbols on an opaque background.
  • All electronic signs within one hundred fifty (150) feet and visible from a residential property must remain static between 11:00 p.m. and 5:00 a.m. daily.
  • Signs may not be located within the vision clearance triangle (clear-vision area) as defined in the Greensburg Design Standards Manual.
  • Signs may not be located within the public right-of-way unless in a specifically allowed sign easement or explicitly approved (e.g., by Board of Works where stated) and must in all cases be at least two (2) feet from any public right-of-way.
  • Signs must be set back a minimum of ten (10) feet from the back of any street curb or any edge of street pavement within a public right-of-way wherever that general setback standard is stated (applies repeatedly across sign types).
  • Under no circumstances may any sign structure support a sign higher than: 30 feet on a Principal Arterial Street, 20 feet on a Major Collector Street, 15 feet on a Minor Arterial Street, or 6 feet on a Local Street (measured from ground to the bottom of the sign face).
  • Signs placed on inoperable vehicles or vehicles without current license plates parked on public or private property primarily for the purpose of displaying the sign are prohibited; this does not include signs on operable, licensed vehicles used for deliveries, sales, service, or normal transportation and parked at a residence during non-business hours or for incidental purposes.
  • Permanent inflatable, animated, or moving signs are prohibited.
  • Billboard signs are prohibited; erection of new billboards is not allowed within the City. (Existing billboards are treated as conforming structures as long as they are not structurally deficient.)
  • Signs in the public right-of-way are prohibited unless they are for traffic direction or safety and are placed by a governmental entity.
  • Signs utilizing any motion picture, laser, or visual projection are prohibited.
  • Signs that emit audible sound, odor, or visible matter are prohibited.
  • Signs that purport to be, imitate, or resemble an official traffic sign or signal, or that bear the words “Stop”, “Slow”, “Caution”, “Danger”, “Warning”, or similar words, are prohibited.
  • Signs that may be construed as a light of an emergency or road equipment vehicle are prohibited.
  • Signs that hide from view any traffic or roadway sign, signal, or device are prohibited.
  • Signs that interfere with the sight visibility requirements in the Greensburg Design Standards Manual are prohibited.
  • Signs that extend above the roof line or parapet of a building or are mounted on or are part of the roof are prohibited.
  • Signs that obstruct any door, fire escape, stairway, or any opening intended to provide entrance or exit for any building or structure are prohibited.
  • Temporary and portable signs may be removed by the Administrator without prior notice if in violation, and any sign (of any type) that presents an immediate threat to public safety may be removed immediately and without notice, with removal costs borne by the sign owner.

Exempt Signs in Greensburg

  • Street address signs used to provide adequate property identification are exempt from all provisions of Section 3.I, Sign Standards.
  • Flags with non-commercial messages, including flags of any country, state, unit of local government, institution of higher learning, or similar institutional flags, are exempt from all provisions of Section 3.I, Sign Standards.
  • Historical building signs such as building names, date of erection, monumental citations, commemorative tablets, and similar features carved into stone, concrete, or similar material or made of bronze, aluminum, or other permanent construction are exempt from all provisions of Section 3.I, provided they contain no commercial messages or logos.
  • Public and private directional and safety signs of a non-commercial nature and in the public interest, or erected by or on the order of public officers in the performance of public duty (e.g., safety signs, no-trespassing signs, traffic signs, memorial plaques, signs of historical interest, signs directing people to public and quasi-public facilities) are exempt from all provisions of Section 3.I.
  • Utility signs used to mark cables and lines for public and private utilities are exempt from all provisions of Section 3.I, except that they may be removed or restricted if determined to be a hazard by the Administrator.
  • During the defined election period (60 days before an election until the 6th day after), the standards for maximum size and maximum number of signs contained in the sign chapter do not apply to any sign that does not exceed thirty-two (32) square feet, provided the sign is not placed in the right-of-way and the private property owner grants permission for placement on private property.

Sign Plan & Submission Notes for Greensburg

  • Throughout the sign standards, an Improvement Location Permit (ILP) is required for most sign activities (erection, construction, enlargement, movement, conversion, or change of permanent copy on permanent on-premise signs) unless a specific provision states that no ILP is required (e.g., certain small permanent residential wall signs, non-illuminated window signs under stated percentage limits).
  • Temporary Signs in Non-residential Districts (Table 3.10) require an ILP unless otherwise specified.
  • Permanent Signs in Residential Districts (Table 3.11) require an ILP unless otherwise specified; within that table, permanent residential wall signs explicitly state that no ILP is required.
  • Permanent Signs in the Conservation (C-1) and Institutional (IN-1) Districts (Table 3.12) require an ILP unless otherwise specified; illuminated window signs visible from the road require an ILP, while non-illuminated window signs within the stated percentage of window area do not.
  • Permanent Signs in the Central Business District (B-1) (Table 3.13) require an ILP unless otherwise specified; illuminated window signs visible from the road require an ILP, while non-illuminated window signs within the stated percentage of window area do not.
  • Permanent Signs in the Business and Industrial Districts (Table 3.14) require an ILP unless otherwise specified; illuminated window signs visible from the road require an ILP, while non-illuminated window signs within the stated percentage of window area do not.
  • Directional signs for multi-tenant developments may be approved in size and placement by the Administrator in several districts (e.g., Institutional, Central Business District, Business and Industrial), and such directional structures are expressly not counted as signs for purposes of quantity or area limits and do not trigger sign-area calculations; these administrative approvals function as a limited sign-planning mechanism even though no formal master sign plan terminology is used.
  • The ordinance excerpt provided does not mention a Master Sign Plan, comprehensive sign plan, or special sign variance procedure by name; any such requirements, if they exist, would be in sections not included in this text.

Source: other municipal code