Questions? Call us at (262) 218-2915

Sign Regulations in Junction City, Kansas

Junction City, Kansas has specific sign regulations covering 7 sign types across 5 zoning districts. Regulated sign types include Ground Sign, Wall Sign, Projecting, Suspended or Awning Sign. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Junction City, Kansas

Sample Sign Requirements in Junction City

Sign TypeMax AreaSetback
Ground Sign8 sq ft (one face); maximum per zoning lotNot listed
Wall Sign8 sq ft (one face); maximum per zoning lotNot listed
Projecting, Suspended or Awning Sign8 sq ft (one face); maximum per zoning lotMinimum 3' behind curb, maximum 8' beyond lot line

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Junction CityFull Coverage

Sign Types Covered

7

  • Ground Sign
  • Wall Sign
  • Projecting, Suspended or Awning Sign
  • Roof Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements

Official Resources for Junction City

City WebsiteMunicipal Code5 permit application links available

Junction City, Kansas Sign Rules at a Glance

Junction City, Kansas regulates 7 sign types across 5 zoning districts. Projecting, Suspended or Awning Signs in the Residential District, MH District must be set back at least 3' behind curb, maximum 8' beyond lot line. Most commercial signs in Junction City require a permit.

Detailed Sign Ordinance Requirements for Junction City, Kansas

Sign Rules by Zoning District in Junction City (5 zones)

Zoning DistrictSign Types RegulatedMax Area
Residential District, MH District38 sq ft (one face); maximum per zoning lot
INS (Institutional Uses in Residential Districts)3100 sq ft (one face) per zoning lot
Commercial District, Industrial District, Airport District6500 sq ft (one face) per zoning lot
General Regulations For All Zones1Not listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Junction City(sample of 3 of 5 zones)

Residential District, MH District

Sign TypeMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign8 sq ft (one face); maximum per zoning lotNot listedPrivate property within the zoneUnlockSection 650.050 Table A, Table B
Wall Sign8 sq ft (one face); maximum per zoning lotNot listedBuilding wall on private propertyUnlockSection 650.050 Table A, Table B
Projecting, Suspended or Awning Sign8 sq ft (one face); maximum per zoning lotMinimum 3' behind curb, maximum 8' beyond lot lineBuilding facade compliant with projection rulesUnlockSection 650.050 Table A, Table C

INS (Institutional Uses in Residential Districts)

Sign TypeMax AreaSetbackLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign100 sq ft (one face) per zoning lotNot listedPrivate propertyUnlockSection 650.050 Table A, Table B
Wall Sign100 sq ft (one face) per zoning lot; 5% of wall areaNot listedBuilding wallUnlockSection 650.050 Table A, Table B
Projecting, Suspended or Awning Sign100 sq ft (one face) per zoning lotMinimum 3' behind curb, maximum 8' beyond lot lineOver walkways or at entrances, subject to Table C requirementsUnlockSection 650.050 Table A, Table B, Table C

Commercial District, Industrial District, Airport District

Sign TypeMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign500 sq ft (one face) per zoning lotNot listedNot listedPrivate propertyUnlockSection 650.050 Table A, Table B
Wall Sign500 sq ft (one face) per zoning lot; 5% of wall areaNot listedNot listedBuilding wallUnlockSection 650.050 Table A, Table B
Roof Sign500 sq ft (one face) per zoning lot; 5% of wall areaNot listedNot listedOn or over the roof of a buildingUnlockSection 650.050 Table A, Table B
Projecting, Suspended or Awning Sign500 sq ft (one face) per zoning lotMinimum 3' behind curb, maximum 8' beyond lot lineNot listedBuilding facade, over walkways or at entrances, subject to Table C requirementsUnlockSection 650.050 Table A, Table B, Table C
Temporary SignNot listedNot listedNo more than two (2) temporary sign permits shall be issued to the same business license holder on the same zone lot in any calendar year.Private propertyUnlockSection 650.050 Table A; Section 650.150
Billboard (Off Premise)Ground sign requirement + 300 sq ft (one face)Not listedNot listedWithin 75 ft of I-70 right-of-wayUnlockSection 650.050 Table A, Table B

PermitPal covers all 5 zoning districts in Junction City. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Junction City

  • All signs not expressly permitted by this Chapter or exempt from regulation hereunder are prohibited in the City.
  • Banners are prohibited except wall mounted (size determined by wall sign allowance).
  • Temporary signs with flashing lights are prohibited.
  • No sign shall be erected or placed so as to obstruct the doors and windows of any building or otherwise prevent free ingress or egress to or from any window, door, or fire escape; nor shall any sign be attached in any form, shape or manner to any part of the fire escape.
  • No sign shall be hung, installed, or supported in any manner on or off a building which will hinder or conflict with traffic signals.
  • No sign shall be permitted which impersonates or creates a similarity to any traffic regulatory device or emergency vehicle lights.
  • No signs shall be allowed in the public right-of-way except those specifically allowed in Section 650.100.
  • Any sign installed or placed on public property, except in conformance with Section 650.100, shall be forfeited to the public and subject to confiscation.
  • No person, firm, or corporation shall engage in the business of sign hanging or erection within the City without a license and compliance with bond and insurance requirements.
  • No sign permit shall be issued for a sign that does not comply with all requirements of these regulations.
  • It is a violation to erect, place, establish, alter, modify, paint, create, install, construct, or maintain any sign in a way that is inconsistent with any plan or permit governing such sign or the zone lot on which the sign is located.
  • It is a violation to erect, place, establish, alter, modify, paint, create, install, construct or maintain any sign requiring a permit without such a permit.
  • It is a violation to erect, place, establish, alter, modify, paint, create, install, construct, or maintain any sign requiring a permit without a license as provided by Section 650.060.

Exempt Signs in Junction City

  • Any public notice or warning required by a valid and applicable Federal, State or local law, regulation or ordinance.
  • Works of art that do not include a commercial message.
  • Signs with historical significance.
  • Holiday lights and decorations with no commercial message, but only between November 15th and January 15th.
  • Traffic control signs on private property, such as stop, yield and similar signs, the face of which meet Manual of Uniform Traffic Control Devices standards and which contain no commercial message.
  • A sign exhibiting the street number or name, or both, of a residence.
  • Garage sale signs.
  • Political campaign signs.
  • Commercial design real estate 'for sale' signs and 'open house' signs and 'for rent' signs when placed eight feet from the curb or behind the sidewalk.
  • Incidental signs.

Sign Plan & Submission Notes for Junction City

  • All applications for sign permits of any kind must be submitted to the Codes Administrator using forms or specifications provided.
  • An application for erecting, placing, establishing, altering, modifying, painting, creating, installing, or construction of a new sign or for modification of an existing sign must be accompanied by detailed drawings to show the dimensions, design, structure, and location of each particular sign.
  • One application and permit may include multiple signs on the same zone lot.
  • Permitted signs (marked 'P' in Table A) require a sign permit before installation or modification.
  • No explicit reference to master sign plans or variance meetings is made in these sections.

Source: municode municipal code

Frequently Asked Questions

Most commercial signs in Junction City require a permit. From the submission notes on this page: All applications for sign permits of any kind must be submitted to the Codes Administrator using forms or specifications provided. Run a code check for an exact address to see the permit requirements for that zone.

Junction City's sign code covers 7 sign types, including Ground Sign, Wall Sign, Projecting, Suspended or Awning Sign, and Roof Sign. Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: Incidental signs. The full list is on this page.

In Junction City, Projecting, Suspended or Awning Sign in the Residential District, MH District must be set back at least 3' behind curb, maximum 8' beyond lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Junction City's sign ordinance that cover digital, changing, or flashing signs: Temporary signs with flashing lights are prohibited. Run a code check for an exact address to see the rules for that zone.

AI-Powered Research

Ready to Research Junction City Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Junction City, Kansas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds