Sign Regulations in Campbellsville, Kentucky
Campbellsville, Kentucky has specific sign regulations covering 8 sign types across 3 zoning districts. Regulated sign types include Outdoor Advertising Display (Billboard), Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55, Ground Sign (General). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: September 16, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Campbellsville, Kentucky
Sample Sign Requirements in Campbellsville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55 | 50 ft (measured from average grade to the lowest point on the principal face). | 600 sq ft per side (the total area of all faces on each side shall not exceed 600 sq ft). | At least 10 ft from front property line and 3 ft from side property line; not within 500 ft (measured along the adjacent right-of-way) of an historical district, a public elementary or public secondary school, or a residential district; minimum 500 ft spacing between outdoor advertising displays on the same side of the right-of-way. |
| Ground Sign (General) | Up to 35 ft if structural frame is combustible; up to 100 ft if entirely noncombustible; however, all signs are locally capped at 50 ft in height. | Not listed | At least 10 ft from front property line; 3 ft from side property line. |
| Wall Sign (General) | Subject to the general 50-ft overall sign height cap. | Not listed | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
8
- Outdoor Advertising Display (Billboard)
- Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55
- Ground Sign (General)
- Wall Sign (General)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Campbellsville
Other Cities in Kentucky
Frequently Asked Questions
In Campbellsville, the height limit for Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55 in the Business Districts is 50 ft (measured from average grade to the lowest point on the principal face). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Campbellsville require a permit. From the submission notes on this page: Where a sign permit is required, construction documents (plans) are required to be submitted with the permit application, showing dimensions, materials, loads, stresses, and anchors. Run a code check for an exact address to see the permit requirements for that zone.
Campbellsville's sign code covers 8 sign types, including Outdoor Advertising Display (Billboard), Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55, Ground Sign (General), and Wall Sign (General). Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Painted nonilluminated signs are exempt from permit requirements. The full list is on this page.
In Campbellsville, Ground Sign (General) must be set back at least 10 ft from front property line. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Campbellsville's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Campbellsville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Campbellsville, Kentucky, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Campbellsville, Kentucky Sign Rules at a Glance
Campbellsville, Kentucky regulates 8 sign types across 3 zoning districts. Most commercial signs in Campbellsville require a permit.
Detailed Sign Ordinance Requirements for Campbellsville, Kentucky
Sign Rules by Zoning District in Campbellsville (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential District; Historic District; Agricultural District | 1 | Not listed | Not listed | Not listed |
| Business Districts | 1 | 50 ft (measured from average grade to the lowest point on the principal face). | 600 sq ft per side (the total area of all faces on each side shall not exceed 600 sq ft). | Not listed |
| General Regulations For All Zones | 6 | Subject to the general 50-ft overall sign height cap. | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Campbellsville
Residential District; Historic District; Agricultural District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Outdoor Advertising Display (Billboard) | Not listed | Not listed | Not listed | Not listed | 0 allowed. | Not allowed in Residential, Historic, or Agricultural districts. | Not listed | Unlock | Ord. 95-009 §5(a); §2(b). |
Business Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Outdoor Advertising Display (Billboard) - Along KY Highways 210, 68 and 55 | 50 ft (measured from average grade to the lowest point on the principal face). | 600 sq ft per side (the total area of all faces on each side shall not exceed 600 sq ft). | Not listed | At least 10 ft from front property line and 3 ft from side property line; not within 500 ft (measured along the adjacent right-of-way) of an historical district, a public elementary or public secondary school, or a residential district; minimum 500 ft spacing between outdoor advertising displays on the same side of the right-of-way. | Citywide cap-and-replacement: no increase in total face area or number of faces within business districts and the City; new permits issued at a ratio of 1 face per 400 population increase; erection of a new outdoor advertising sign requires removal of an existing sign with equal face area and number of faces. | Permitted only on property adjacent to the rights-of-way of KY Highways 210, 68, and 55 ("Permitted Areas"). | Not listed | Unlock | Ord. 95-009 §2(c) (Permitted Areas); §5(b) (Business districts/Highways 210, 68, 55); §6(a) (height); §6(b) (area); §6(c) (distance from districts/schools); §6(d) (spacing); §4(a)-(e) (prohibitions/illumination); §3 (maintenance/removal); §9 (construction permit); §10 (annual inspection/notice); §11 (penalties); §8 (cap and replacement); Ord. 07-10 §3 (setbacks, 50' height, Appendix H adoption); Appendix H H105–H106. |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground Sign (General) | Up to 35 ft if structural frame is combustible; up to 100 ft if entirely noncombustible; however, all signs are locally capped at 50 ft in height. | Not listed | Not listed | At least 10 ft from front property line; 3 ft from side property line. | Not listed | Not listed | Not listed | Unlock | Appendix H H109.1–H109.3 (ground signs); H105.1–H105.6 (design/loads/attachments); H106.1–H106.2 (electrical/illumination); Ord. 07-10 §3 (10' front, 3' side setbacks; 50' height cap; Appendix H adoption); Appendix B §6 (sign permit fee). |
| Wall Sign (General) | Subject to the general 50-ft overall sign height cap. | Not listed | Not listed | Not listed | Not listed | Attached to exterior walls per specified anchorage requirements. | Not listed | Unlock | Appendix H H111.1–H111.3 (wall signs); H106.1 (illumination); Ord. 07-10 §3 (50' height cap). |
| Projecting Sign (General) | Shall not project above the roof or cornice wall (limited exception: a sign at right angle to the building with horizontal width perpendicular to the wall not exceeding 18 inches may extend up to 2 ft above the roof or cornice). | Not listed | Not listed | Not listed | Not listed | Securely attached to a building or structure with metal supports (bolts, anchors, supports, chains, guys, steel rods). | Not listed | Unlock | Appendix H H112.1–H112.5. |
| Marquee Sign (General) | Shall not extend more than 6 ft above nor more than 1 ft below the marquee; vertical dimension not greater than 8 ft. | Not listed | Not listed | Not listed | Not listed | Must be attached to approved marquees constructed per IBC Section 3106. | Not listed | Unlock | Appendix H H113.1–H113.4. |
| Roof Sign (General) | Solid surface roof signs: max 24 ft above roof surface. Open roof signs: up to 75 ft above roof on Type 1 or 2 buildings; up to 40 ft on other construction types. Closed roof signs: up to 50 ft above roof (Type 1 or 2); up to 35 ft (Types 3, 4, 5). Note: all signs are locally capped at 50 ft overall height. | Not listed | Not listed | Not listed | Not listed | On roofs; no portion may project beyond an exterior wall. | Not listed | Unlock | Appendix H H110.1–H110.5; Ord. 07-10 §3 (50' height cap). |
| Portable Sign (General) | Not listed | Not listed | Not listed | Local setbacks (10' front, 3' side) and 50' overall height cap apply where applicable. | Not listed | Not listed | Not listed | Unlock | Appendix H H114.1; Table 4-A; H106.1. |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Campbellsville with a free PermitPal account.
Run a free code checkProhibited Signs in Campbellsville
- Placement of any sign within 10 feet of the front property line is prohibited.
- Placement of any sign within 3 feet of a side property line is prohibited.
- Any sign exceeding 50 feet in height is prohibited.
- Signs shall not be illuminated by other than electrical means.
- Use of any open spark or flame for display purposes is prohibited unless specifically approved.
Exempt Signs in Campbellsville
- Painted nonilluminated signs are exempt from permit requirements.
Sign Plan & Submission Notes for Campbellsville
- No master sign plan or sign plan requirement is stated in the provided text.
- Where a sign permit is required, construction documents (plans) are required to be submitted with the permit application, showing dimensions, materials, loads, stresses, and anchors.
Source: other municipal code