Sign Regulations in Danville, Kentucky
Danville, Kentucky has specific sign regulations covering 37 sign types across 12 zoning districts. Regulated sign types include Freestanding Sign (Monument) - Nonresidential and Conditional Uses, Wall Sign - Nonresidential and Conditional Uses, Entrance Sign (Monument) - AG. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: November 24, 2025
Sign Regulation Overview for Danville, Kentucky
Sample Sign Requirements in Danville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign (Monument) - Nonresidential and Conditional Uses | 10 ft maximum height | 32 sq ft maximum sign face area | Minimum 10 ft from edge of pavement for all freestanding signs (4.6.8.F.4.f). No on‑premise sign within 25 ft of an abutting Single Family Residential district (4.6.8.F.4.h). Must not obstruct free and clear vision at intersections/right‑of‑way (4.3.5.C.3.a and 4.6.8.F.4.e). |
| Wall Sign - Nonresidential and Conditional Uses | — | 32 sq ft maximum face area per use | When the principal structure is closer than 10 ft to the edge of pavement, sign must be on the building wall instead of freestanding (4.6.8.F.4.f). |
| Entrance Sign (Monument) - AG | 5 ft maximum height | 60 sq ft maximum total sign face area | May be placed in public right‑of‑way only with written permission. Otherwise must also comply with general visibility and right‑of‑way restrictions in 4.3.5.C.3.a and 4.6.8.F.4.e. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
37
- Freestanding Sign (Monument) - Nonresidential and Conditional Uses
- Wall Sign - Nonresidential and Conditional Uses
- Entrance Sign (Monument) - AG
- Temporary On-Premise Sign - AG
- +2 more types
Zoning Districts
12
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Danville
Other Cities in Kentucky
Frequently Asked Questions
In Danville, monument signs are limited to 10 ft maximum height. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.
To get a sign permit in Danville, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Danville, regulated sign types include Freestanding Sign (Monument) - Nonresidential and Conditional Uses, Wall Sign - Nonresidential and Conditional Uses, Entrance Sign (Monument) - AG, Temporary On-Premise Sign - AG, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
In Danville, monument signs typically require a Minimum 10 ft from edge of pavement for all freestanding signs (4.6.8.F.4.f). No on‑premise sign within 25 ft of an abutting Single Family Residential district (4.6.8.F.4.h). Must not obstruct free and clear vision at intersections/right‑of‑way (4.3.5.C.3.a and 4.6.8.F.4.e). setback from property lines. Setbacks may increase near residential zones or intersections. Wall signs attached to buildings generally don't have setback requirements. Use PermitPal for location-specific setback data.
Digital and LED signs in Danville are regulated with specific requirements for brightness, animation, and message duration. Danville has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Danville Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Danville, Kentucky sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds