Sign Regulations in Palmer Town, Massachusetts
Palmer Town, Massachusetts has specific sign regulations covering 21 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Governmental Agency Sign, Directional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Palmer Town, Massachusetts
Sample Sign Requirements in Palmer Town
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Directional Sign | 4 ft | 6 sq ft | Not listed |
| Temporary Sale/Lease Sign | Not listed | 6 sq ft | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less |
| Temporary Contractor Sign | Not listed | 4 sq ft | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
21
- Wall Sign
- Governmental Agency Sign
- Directional Sign
- Temporary Sale/Lease Sign
- +2 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Palmer Town
Other Cities in Massachusetts
Frequently Asked Questions
In Palmer Town, the height limit for Subdivision/Ground Identification Sign (Residential Developments) is 5 ft (Sec. 171-80A(16)(a)). Maximum sign heights range from 5 ft to 25 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Palmer Town require a permit. From the submission notes on this page: No sign shall be erected, altered or enlarged until a permit has been issued by the Building Inspector. Permit shall be issued only if the sign complies or will comply with all applicable provisions. Run a code check for an exact address to see the permit requirements for that zone.
Palmer Town's sign code covers 21 sign types, including Wall Sign, Governmental Agency Sign, Directional Sign, and Temporary Sale/Lease Sign. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Signs painted or placed on the inside of a window are permitted, provided aggregate area does not exceed 20% of window glass area. The full list is on this page.
In Palmer Town, Subdivision/Ground Identification Sign (Residential Developments) must be set back at least 15 ft (Sec. 171-80A(16)(a)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Palmer Town's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Palmer Town Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Palmer Town, Massachusetts, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Palmer Town, Massachusetts Sign Rules at a Glance
Palmer Town, Massachusetts regulates 21 sign types across 7 zoning districts. Subdivision/Ground Identification Signs (Residential Developments) are capped at 5 ft tall and 12 sq ft per side, with a minimum 15 ft setback (Sec. 171-80A(16)(a)). Most commercial signs in Palmer Town require a permit.
Detailed Sign Ordinance Requirements for Palmer Town, Massachusetts
Sign Rules by Zoning District in Palmer Town (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 7 | 5 ft | 25 sq ft | Not listed |
| R District | 3 | Not listed | 10 sq ft (membership club, etc.); 40 sq ft (extra church/community sign) | Not listed |
| B District, V District | 4 | 10 ft | 100 sq ft | Not listed |
| HB District | 1 | 25 ft | 50 sq ft per side | Not listed |
| Neighborhood Business (NB) District, General Business (GB) District, V District | 1 | 10 ft | 25 sq ft in GB District; 20 sq ft in NB or V District | Not listed |
| I District | 3 | 15 ft | 50 sq ft | Not listed |
| URIP District (Urban Renewal Industrial Park District) | 3 | Not listed | 12 sq ft per face | Not listed |
Zone-by-Zone Sign Requirements in Palmer Town(sample of 3 of 7 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Governmental Agency Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Any location with Town Manager approval | Not listed | Unlock | §171-80A(1) |
| Directional Sign | 4 ft | 6 sq ft | Not listed | Not listed | 1 per curb cut | Per curb cut. For directions to business, residence, industry, etc. | Not listed | Unlock | §171-80A(4) |
| Temporary Sale/Lease Sign | Not listed | 6 sq ft | Not listed | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less | 1 | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less | Not listed | Unlock | §171-80A(11) |
| Temporary Contractor Sign | Not listed | 4 sq ft | Not listed | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less | 1 | At least 10 ft from street lot line or 1/2 of building setback distance, whichever is less, on lot where work is being performed | Not listed | Unlock | §171-80A(12) |
| Window Sign (Interior) | Not listed | Not listed | Not listed | Not listed | Not listed | On inside of window | Not listed | Unlock | §171-80A(15) |
| Subdivision/Ground Identification Sign (Residential Developments) | 5 ft | 12 sq ft per side | Not listed | At least 15 ft | 1 per development | On private property, not within Town street right-of-way | Not listed | Unlock | §171-80A(16)(a) |
| Civic Organization Sign (Town Boundary) | Not listed | 25 sq ft | Not listed | Not listed | 1 per Town boundary | At boundary line of the Town, within street right-of-way | Not listed | Unlock | §171-80A(8) |
R District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign (Dwelling Unit) | Not listed | 2 sq ft | Not listed | Not listed | 1 per dwelling unit | Each dwelling unit | Not listed | Unlock | §171-80B(1)(a) |
| Identification Sign (Membership Club, Funeral Establishment, Hospital, Place of Public Assembly, Community Facility, Public Utility) | Not listed | 10 sq ft (membership club, etc.); 40 sq ft (extra church/community sign) | Not listed | At least 1/2 front yard setback | 1 per establishment (+1 for churches and certain community facilities) | Each establishment | Not listed | Unlock | §171-80B(1)(b) |
| Identification Sign (Tourist Home/Bed-and-Breakfast) | Not listed | 4 sq ft | Not listed | Not listed | 1 per establishment | Each tourist home/bed-and-breakfast facility | Not listed | Unlock | §171-80B(1)(c) |
B District, V District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Main Frontage) | Not listed | 100 sq ft | Not listed | Not listed | 1 per establishment | On main (frontage) wall of each establishment in a structure | Not listed | Unlock | §171-80D(2)(a)[1] |
| Wall Sign (Side Wall) | Not listed | 25 sq ft | Not listed | Not listed | 1 per side wall per establishment | On side wall facing non-rear lot line, not facing or abutting within 100 ft of a residential district | Not listed | Unlock | §171-80D(2)(b)[1] |
| Awning/Canopy Sign | Not listed | Not listed | Not listed | Not listed | See additional requirements | On awning/canopy attached to building | Not listed | Unlock | §171-80D(2)(b)[2] |
| Ground Sign (General) | 10 ft | 25 sq ft in GB district; 20 sq ft in NB and V districts | Not listed | Not listed | 1 per lot frontage per special permit | Same lot as advertised structure/establishment | Not listed | Unlock | §171-80D(2)(c)[2] |
PermitPal covers all 7 zoning districts in Palmer Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Palmer Town
- A sign or its illuminator shall not by reason of its location, shape, size, or color interfere with traffic or be confused with or obstruct the view or effectiveness of any official traffic sign, traffic signal, or traffic marking.
- A sign or any part thereof which moves or flashes, all signs of the traveling-light or animated type, and all beacons and flashing devices are prohibited, except such portions as show time/temperature or automatically changing messages when permitted by the Building Inspector and deemed not a hazard.
- All illumination of signs must be so arranged as to prevent glare onto any portion of any public way or into any residential area.
- No sign, together with any supporting framework, shall extend above the maximum building height allowed in the district or above the roofline (in pitched roofs, above the eave line).
- No sign shall be erected so as to obstruct any door, window or fire escape on a building.
- No sign, except for a traffic regulatory or informational sign, shall be erected which uses the words 'stop,' 'caution,' or 'danger,' or other similar words in such a manner as to present or imply the need or requirement of stopping or caution or the existence of danger, or which may be confused with any traffic regulatory or informational sign.
- If lighting is provided, the source must be from within the sign or be exterior but shielded to prevent direct glare onto public streets or adjacent property.
- Moving or portable signs, such as those commonly used in conjunction with gasoline or filling station operations and automobile dealers and garage activities, including banners and flags and any sign displayed on a vehicle when such vehicle is being used primarily for the purpose of such display, are prohibited.
- Blimps, hot air balloons and like devices for advertising are prohibited.
- Signs on public property are prohibited, with the exception of street and highway signs or as may be permitted by the Town Manager.
- All signs shall be removed within 30 days of the date from which they no longer serve their intended function.
- It shall be unlawful for any person to place or maintain or to display upon or in view of any street any unofficial sign, signal or marking which purports to be or is an imitation of or resembles an official traffic sign, signal or marking or which attempts to direct the movement of traffic or which hides from view any official sign or signal.
- Any person who willfully defaces, injures, moves, obstructs or interferes with any official traffic sign, signal or marking shall be liable to penalty.
Exempt Signs in Palmer Town
- Any traffic, informational or directional sign owned and installed by a governmental agency shall be permitted with approval of the Town Manager.
- Limitations as to the number of signs permitted does not apply to traffic or directional signs necessary for safety and directions of residents, employees, customers and visitors, provided they meet specific size, height, illumination, and content requirements (e.g., business name secondary and not larger than half the directional message; maximum size six square feet; max height four feet).
- Signs painted or placed on the inside of a window are permitted, provided aggregate area does not exceed 20% of window glass area.
- In any district, one unlighted temporary sign offering premises for sale or lease for each parcel in one ownership shall be permitted, provided it does not exceed six square feet and is set back at least 10 feet from the street lot line or one half the building setback distance.
- In any district, one unlighted temporary sign for an architect, engineer or contractor, erected during the period of work on the premises, is permitted, provided it does not exceed four square feet and is set back at least 10 feet from the street lot line or half the building setback distance.
- At each boundary line of the Town and within a street right-of-way, not more than one sign not exceeding 25 square feet in area indicating the meetings of any Palmer civic organization may be erected, subject to required approvals.
- One ground sign identifying approved residential subdivisions, townhouse, multifamily, and open space developments is permitted under enumerated conditions (size, location, setback, illumination, etc.), but only until the access has been accepted as Town right-of-way.
Sign Plan & Submission Notes for Palmer Town
- In particular instances, the Planning Board may issue a special permit (variance) allowing more than the number of signs, or for signs of a larger size or height than otherwise allowed, if they determine it is in public interest and not detrimental to the neighborhood. The Board will specify exact sign permitted, size, location, and restrictions in the permit, and any change to said signs will require a new or revised special permit.
- No sign shall be erected, altered or enlarged until a permit has been issued by the Building Inspector. Permit shall be issued only if the sign complies or will comply with all applicable provisions.
- A permit must be obtained for signs permitted in residential areas and for temporary signs, although a fee will not be charged for these.
- For nonaccessory signs (such as billboards), an annual permit from the Massachusetts Outdoor Advertising Board may be required if the sign is not in conformity with applicable Town ordinances.
- Preexisting nonconforming accessory signs may not be changed, extended, or altered except to become conforming unless the Planning Board finds such change not substantially more detrimental to the neighborhood and does not make the sign more nonconforming.
- Nonconforming, nonaccessory (general advertising) signs lawfully erected before adoption of the chapter may be maintained, but no new nonaccessory signs permitted after adoption, and existing ones may not be enlarged or expanded.
Source: ecode360 municipal code