Sign Regulations in Burton, Michigan
Burton, Michigan has specific sign regulations covering 19 sign types across 4 zoning districts. Regulated sign types include Freestanding Sign (Accessory), Wall Sign (Building), Sandwich Board Sign (A-frame). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Burton, Michigan
Sample Sign Requirements in Burton
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign (Accessory) | Not listed | 300 sq ft | Cannot be in public right-of-way or project more than 15 inches into right-of-way without permission and other requirements; see §153.06(D). |
| Wall Sign (Building) | Not listed | 200 sq ft | See public right-of-way projection limits in §153.06(D). |
| Sandwich Board Sign (A-frame) | 42 inches | Not listed | 10 ft from road/right-of-way |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
19
- Freestanding Sign (Accessory)
- Wall Sign (Building)
- Sandwich Board Sign (A-frame)
- Billboard Freestanding Sign (Off-site Advertising)
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Michigan
Frequently Asked Questions
In Burton, the height limit for Billboard Freestanding Sign (Off-site Advertising) in the Commercial Districts, Industrial Districts is 25 ft (Sec. 153.07(B)(2)(a-k)). Maximum sign heights range from 6 ft to 42 inches across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Burton require a permit. From the submission notes on this page: No general requirement for a master sign plan or comprehensive sign plan is indicated in the cited ordinance text. The approval process is individual via sign permit reviewed by the Zoning Administrator (except for exempted sign types). Run a code check for an exact address to see the permit requirements for that zone.
Burton's sign code covers 19 sign types, including Freestanding Sign (Accessory), Wall Sign (Building), Sandwich Board Sign (A-frame), and Billboard Freestanding Sign (Off-site Advertising). Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Signs that are not visible from abutting property or public rights-of-way. The full list is on this page.
In Burton, Sandwich Board Sign (A-frame) in the Commercial Districts, Industrial Districts must be set back 10 ft from road/right-of-way (Sec. 153.07(A)(9)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Burton's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Burton Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Burton, Michigan, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Burton, Michigan Sign Rules at a Glance
Burton, Michigan regulates 19 sign types across 4 zoning districts. Temporary Signs (Residential Districts, Local Street/Private Drive) in the Residential Districts are capped at 3 ft tall and 6 sq ft (Sec. 153.08(A)(1)(c)). Most commercial signs in Burton require a permit.
Detailed Sign Ordinance Requirements for Burton, Michigan
Sign Rules by Zoning District in Burton (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Commercial Districts, Industrial Districts | 6 | 42 inches | 300 sq ft | Not listed |
| Multiple Family Districts | 4 | 6 ft | 64 sq ft | Not listed |
| Residential Districts | 4 | 6 ft | 32 sq ft | Not listed |
| General Regulations For All Zones | 5 | 6 ft | 16 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Burton(sample of 3 of 4 zones)
Commercial Districts, Industrial Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (Accessory) | Not listed | 300 sq ft | Not listed | Cannot be in public right-of-way or project more than 15 inches into right-of-way without permission and other requirements; see §153.06(D). | 1 per single building/structure/shopping center; 2 if parcel abuts 2+ streets | On same parcel as building/use. If structure abuts 2+ streets, 2 freestanding signs permitted. | Not listed | Unlock | §153.07(A)(1)-(2), (4)-(8) |
| Wall Sign (Building) | Not listed | 200 sq ft | Not listed | See public right-of-way projection limits in §153.06(D). | Unlimited, subject to maximum total area per structure/unit | On principal front of building/unit | Not listed | Unlock | §153.07(A)(3), (4)-(6) |
| Sandwich Board Sign (A-frame) | 42 inches | Not listed | Not listed | 10 ft from road/right-of-way | 1 per business | In front of business, minimum 10 ft from any public road, street, or right-of-way | Not listed | Unlock | §153.07(A)(9) |
| Billboard Freestanding Sign (Off-site Advertising) | 25 ft | 300 sq ft per face (limit 2 faces) | Not listed | See location details above | Not listed | Industrial districts only; not closer than 50 ft to any public right-of-way, 660 ft to any interstate freeway | Not listed | Unlock | §153.07(B)(2)(a-k) |
| Temporary Sign | 6 ft (adjacent to highway/major street) | 16 sq ft (adjacent to highway/major street) | Not listed | Not listed | Not listed | On private property adjacent to a state highway or city major street | Not listed | Unlock | §153.08(B)(1)-(4) |
| Name Plate (Commercial/Industrial Unit) | Not listed | 2 sq ft | Not listed | Not listed | 1 per unit | On unit | Not listed | Unlock | §153.08(B)(3)-(4) |
Multiple Family Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Ground or Wall Sign (Development Name) | Not listed | 64 sq ft | Not listed | Not listed | 1 per development (in addition to name plates) | At entrance or location identifying development | Not listed | Unlock | §153.07(C)(1); §153.08(A)(3)-(4) |
| Name Plate (Individual Dwelling) | Not listed | 2 sq ft | Not listed | Not listed | 1 per dwelling unit | At individual dwelling unit | Not listed | Unlock | §153.08(A)(2) |
| Temporary Sign (Multiple Family Districts, State Highway/Major Street) | 6 ft | 16 sq ft | Not listed | Not listed | Not listed | On private property adjacent to state highway/major street | Not listed | Unlock | §153.08(A)(1)(a-b) |
| Temporary Sign (Multiple Family Districts, Local Street/Private Drive) | 3 ft | 6 sq ft | Not listed | Not listed | Not listed | On private property on city local street or designated private drive | Not listed | Unlock | §153.08(A)(1)(c) |
Residential Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Bulletin or Announcement Board (Non-dwelling Principal Use/Spec. Approval Use) | Not listed | 32 sq ft | Not listed | No closer to front lot line than 1/2 required front yard setback nor nearer the side lot line than required side yard setback | 1 per use | For permitted principal uses other than dwellings and for permitted uses after special approval | Not listed | Unlock | §153.07(D)(1) |
| Temporary Sign (Residential Districts, State Highway/Major Street) | 6 ft | 16 sq ft | Not listed | Not listed | Not listed | On private property adjacent to state highway/major street | Not listed | Unlock | §153.08(A)(1)(a-b) |
| Temporary Sign (Residential Districts, Local Street/Private Drive) | 3 ft | 6 sq ft | Not listed | Not listed | Not listed | On private property on city local street or designated private drive | Not listed | Unlock | §153.08(A)(1)(c) |
| Name Plate (Residential Unit) | Not listed | 2 sq ft | Not listed | Not listed | 1 per dwelling unit | At dwelling unit | Not listed | Unlock | §153.08(A)(2) |
PermitPal covers all 4 zoning districts in Burton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Burton
- All signs not expressly permitted by this chapter are prohibited.
- No sign shall be erected, constructed, or maintained without the prior permission of the owner or the person in possession of the property upon which it is placed.
- A sign permit is required for the erection, construction, or alteration of any sign, except as provided in § 153.05.
- No sign shall be erected at the intersection of any streets in such a manner as to obstruct free and clear vision, interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal, or device, or in such a manner as to interfere with, mislead, or confuse traffic.
- No sign shall be placed, erected, or operated so as to interfere with the necessary free and unobstructed view of vehicular or pedestrian traffic.
- No sign, except those placed and maintained by the city, county, or state, shall be erected or placed in the public right-of-way, nor allowed to project more than 15 inches into the public right-of-way without special approval.
- No sign or part of a sign shall extend over any part of the public right-of-way used for vehicular traffic.
- No light pole, utility pole, telephone pole or other similar structure shall be used for the placement of any sign.
- Signs must be maintained so as not to endanger life, property, or be in a state of disrepair. Neglected, unsafe, or dilapidated signs are deemed a nuisance.
Exempt Signs in Burton
- Signs placed, constructed, erected, or displayed by any entity of federal, state, or local government, or signs required by such entities, including public notice signs and those required to conform to the Manual of Uniform Traffic Control Devices.
- Signs placed, constructed, or erected on property or right-of-way owned or maintained by any federal, state, or local government entity.
- Traffic control signs and other signs related to public safety installed or required by the city.
- A sign not exceeding sixteen square feet on property where construction work is being done to warn of danger or hazardous conditions. (Also exempt from setback, limitation on number of freestanding signs, and total sign area regulations.)
- A work of art that in no way identifies or advertises a product, service, or business, or impedes traffic safety.
- A private traffic directional sign within a property not exceeding 3 square feet per face and 6 feet in height, without advertising or trade name identification, and not illuminated.
- Signs that are not visible from abutting property or public rights-of-way.
Sign Plan & Submission Notes for Burton
- No general requirement for a master sign plan or comprehensive sign plan is indicated in the cited ordinance text. The approval process is individual via sign permit reviewed by the Zoning Administrator (except for exempted sign types).
- For billboards (off-site advertising) in industrial districts, a drawing with specifications from a state registered engineer or architect must be filed with the Building Inspector for review and approval prior to any construction.
- All non-accessory (billboard) signs in M-1 or M-2 districts require approval by the Board of Zoning Appeals after a public hearing, showing compliance with specified provisions.
- Administrative approval for certain sign types may be subject to site plan review under § 157.092.
- Temporary signs, banners, or inflatable signs require special approval from the Zoning Board of Appeals if they are to be permitted.