Questions? Call us at (262) 218-2915

Sign Regulations in Quincy, Michigan

Quincy, Michigan has specific sign regulations covering 29 sign types across 5 zoning districts. Regulated sign types include Small Sign, Additional Signage for Sale or Lease, Wall Sign - Storefront. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 13, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Quincy, Michigan

Sample Sign Requirements in Quincy

Sign TypeMax HeightMax Area
Construction Sign6 feet16 square feet
Small SignNot listedUnder 2 square feet
Temporary Sign6 feet16 square feet per sign

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for QuincyFull Coverage

Sign Types Covered

29

  • Small Sign
  • Additional Signage for Sale or Lease
  • Wall Sign - Storefront
  • Wall Sign - Upper Floor
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Quincy

City WebsiteMunicipal Code2 permit application links available

Quincy, Michigan Sign Rules at a Glance

Quincy, Michigan regulates 29 sign types across 5 zoning districts. Freestanding Signs in the Commercial District (C) are capped at 6 feet tall and 40 square feet, set back at least 4 feet from all lot lines (Sec. 11.07.B.3). Most commercial signs in Quincy require a permit.

Detailed Sign Ordinance Requirements for Quincy, Michigan

Sign Rules by Zoning District in Quincy (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones66 feet16 square feet
Residential District (R-1, R-2, R-3)116 feet100 square feet
Commercial District (C)1248 inches100 square feet
Central Business District (CBD)1348 inches100 square feet
Industrial District (I)116 feet100 square feet

Zone-by-Zone Sign Requirements in Quincy(sample of 3 of 5 zones)

Residential District (R-1, R-2, R-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign6 feet16 square feet per signNot listedNot listed2 per public street frontageOn private property, not in public right-of-wayUnlockSection 11.04.D
Wall Sign - Home OccupationNot listed2 square feetNot listedNot listed1 per lotAttached to and parallel to exterior wall of building, extending no more than 12 inchesUnlockSection 11.07.A.3.b
Freestanding Sign - Home OccupationNot listed2 square feetNot listedAt least 4 feet from all lot lines1 per lotSupported on ground, not attached to buildingUnlockSection 11.07.A.4.b
Freestanding Sign - Residential Development6 feet24 square feetNot listedAt least 4 feet from all lot lines1 per vehicle entranceAt vehicle entrances of residential developments (subdivisions, apartments, etc.)UnlockSection 11.07.A.4.a
Wall Sign - Multi-Unit ResidentialNot listed100 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on facade facing public road, alley, or parking lotUnlockSection 11.07.A.3.c and B.1
Wall Sign - Non-Residential UseNot listed100 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on any facade facing public road, alley, or parking lotUnlockSection 11.07.A.1 and B.1
Freestanding Sign - Non-Residential Use6 feet40 square feetNot listedAt least 4 feet from all lot lines1 per premises (shared for multi-tenant)Supported on ground, not attached to buildingUnlockSection 11.07.A.1 and B.3
Directional Sign - Non-Residential Use4 feet4 square feetNot listedNot listed1 per approved drivewayDirecting to persons navigating siteUnlockSection 11.07.A.1 and B.3.i

Commercial District (C)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Small SignNot listedUnder 2 square feetNot listedNot listedNot more than 5 per lotNot listedUnlockSection 11.04.A
Wall Sign - StorefrontNot listed100 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on any facade facing public road, alley, or parking lotUnlockSection 11.07.B.1
Wall Sign - Upper FloorNot listed5 square feetNot listedNot listed1 per entranceway (shared)Attached to wall above or near entranceway serving upper-floor businessesUnlockSection 11.07.B.1.b
Wall Sign - No StorefrontNot listed100 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on facade facing public road, alley, or parking lotUnlockSection 11.07.B.1.c
Awning/Marquee SignNot listed70% of awning face area or 90% of marquee faceNot listedNot listed1 per ground-floor businessAffixed flat to surface of awning or marquee projecting from buildingUnlockSection 11.07.B.2
Freestanding Sign6 feet40 square feetNot listedAt least 4 feet from all lot lines1 per premisesSupported on ground, not attached to buildingUnlockSection 11.07.B.3
Directional Sign4 feet4 square feetNot listedNot listed1 per approved drivewayDirecting navigation into or within siteUnlockSection 11.07.B.3.i
Sandwich Board Sign48 inches12 square feet36 inchesNot listed1 per customer entranceOutside customer entrance, providing 5 ft pedestrian passageUnlockSection 11.06.A

Central Business District (CBD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign - StorefrontNot listed30 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on any facade facing public road, alley, or parking lotUnlockSection 11.07.B.1
Wall Sign - Upper FloorNot listed5 square feetNot listedNot listed1 per entranceway (shared)Attached to wall above or near entranceway serving upper-floor businessesUnlockSection 11.07.B.1.b
Wall Sign - No StorefrontNot listed100 square feet90% of the width of the facadeNot listedNo limit provided area standards metAttached to and parallel to exterior wall of building, extending no more than 12 inches; on facade facing public road, alley, or parking lotUnlockSection 11.07.B.1.c
Awning/Marquee SignNot listed70% of awning face area or 90% of marquee faceNot listedNot listed1 per ground-floor businessAffixed flat to surface of awning or marquee projecting from buildingUnlockSection 11.07.B.2
Freestanding Sign6 feet40 square feetNot listedAt least 4 feet from all lot lines1 per premisesSupported on ground, not attached to buildingUnlockSection 11.07.B.3
Directional Sign4 feet4 square feetNot listedNot listed1 per approved drivewayDirecting navigation into or within siteUnlockSection 11.07.B.3.i
Projecting SignNot listed16 square feet per faceNot listedNot listed1 per business (or 1 shared per entrance)Projects from building over sidewalk/right-of-wayUnlockSection 11.07.B.4
Sandwich Board Sign48 inches12 square feet36 inchesNot listed1 per customer entranceOutside customer entrance, providing 5 ft pedestrian passageUnlockSection 11.06.A

PermitPal covers all 5 zoning districts in Quincy. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Quincy

  • Signs which obstruct free access or egress from any building.
  • Signs which in any way simulate or could be confused with the lighting of emergency vehicles or traffic signals.
  • Signs which obstruct or impair the vision of motorists or non-motorized travelers at any intersection, driveway, within a parking lot or loading area.
  • Signs having moving members or parts or spinners, or using high intensity or flashing lights.
  • Non-regulatory signs placed in any public right-of-way, including those attached to a utility pole or affixed to a tree in a public right-of-way, excepting awning and projecting signs that are attached to buildings and project over the sidewalk, and except as permitted in Section 11.06.D.
  • Signs that project above the roof line.
  • Any sign erected without the consent of the owner of the property.
  • Billboards, unless explicitly permitted by MDOT.
  • Signs that make noises of any type.
  • Signs that block the view of other signs, in the opinion of the Zoning Administrator.

Exempt Signs in Quincy

  • Signs under two square feet (with district-specific limits on number).
  • Construction signs (one per project, max 6 ft height, 16 sq ft area, removed within 14 days of occupancy).
  • Flags (up to three per premises).
  • Temporary signage in R-1, R-2, R-3 districts (max two per street frontage, 6 ft height, 16 sq ft each, on private property, good condition, permit if over 6 months unless marketing).
  • Additional signage for sale/lease in C, CBD, I districts (up to 16 sq ft, removed upon sale/lease).
  • Regulatory, directional, and street signs erected by a public agency in compliance with Michigan Manual of Uniform Traffic Control Devices.
  • Signs on motor vehicles or trailers with current plates, traveling or parked (not primarily for sign display, max one per advertiser).
  • Murals (must inform Village and show design; may require permit if deemed a sign or referred to Planning Commission).

Sign Plan & Submission Notes for Quincy

  • Sign permit applications for new buildings or additions require Planning Commission review as part of site plan review, with proposed signs shown on the site plan.
  • For multi-tenant freestanding signs in C, CBD, I districts, the premises owner must propose the sign with approval from all tenants prior to permit issuance.
  • For wall signs on commercial/industrial buildings without storefronts in C, CBD, I districts, the building owner must request the permit with approval from all tenants.
  • Modifications or waivers to sign standards require Planning Commission approval after a public hearing, meeting specific criteria including no endangerment to public safety, consistency with area character, and inadequacy of standard design.

Source: other municipal code

Frequently Asked Questions

In Quincy, the height limit for Freestanding Sign - Residential Development in the Residential District (R-1, R-2, R-3) is 6 feet (Sec. 11.07.A.4.a). Maximum sign heights range from 6 feet to 48 inches across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Quincy require a permit. From the submission notes on this page: Sign permit applications for new buildings or additions require Planning Commission review as part of site plan review, with proposed signs shown on the site plan. Run a code check for an exact address to see the permit requirements for that zone.

Quincy's sign code covers 29 sign types, including Small Sign, Additional Signage for Sale or Lease, Wall Sign - Storefront, and Wall Sign - Upper Floor. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Temporary signage in R-1, R-2, R-3 districts (max two per street frontage, 6 ft height, 16 sq ft each, on private property, good condition, permit if over 6 months unless marketing). The full list is on this page.

In Quincy, Freestanding Sign - Home Occupation in the Residential District (R-1, R-2, R-3) must be set back at least 4 feet from all lot lines (Sec. 11.07.A.4.b). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Quincy's sign ordinance that cover digital, changing, or flashing signs: Signs having moving members or parts or spinners, or using high intensity or flashing lights. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Quincy Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Quincy, Michigan, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds