Questions? Call us at (262) 218-2915

Sign Regulations in Havre, Montana

Havre, Montana has specific sign regulations covering 14 sign types across 4 zoning districts. Regulated sign types include Pole Sign, Ground Sign, Roof Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Havre, Montana

Sample Sign Requirements in Havre

Sign TypeMax HeightMax AreaSetback
Pole Sign35 ft above mean average of lot.200 sq ft total for all pole signs facing one street frontage.Not listed
Ground SignNot listed672 sq ft display area per plot.May not project beyond required building line setback for buildings in the zoning classification.
Wall SignShall not extend more than 12 inches above the highest point of parapet or roof supporting building.Not listedNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HavreFull Coverage

Sign Types Covered

14

  • Pole Sign
  • Ground Sign
  • Roof Sign
  • Wall Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Havre, the height limit for Pole Sign is 35 ft above mean average of lot. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Havre require a permit. From the submission notes on this page: The inspector of buildings may require the filing of plans or other pertinent information with a sign permit application where, in his opinion, such information is necessary to ensure compliance with the chapter. Run a code check for an exact address to see the permit requirements for that zone.

Havre's sign code covers 14 sign types, including Pole Sign, Ground Sign, Roof Sign, and Wall Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Painting, repainting or cleaning of an advertising structure, or changing the advertising copy or message, does not require a sign permit unless a major structural change is made. The full list is on this page.

This page doesn't list a single setback distance for signs in Havre. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Havre's sign ordinance that cover digital, changing, or flashing signs: No blinking, strobe or other pulsating lights may be used on any sign. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Havre Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Havre, Montana, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Havre, Montana Sign Rules at a Glance

Havre, Montana regulates 14 sign types across 4 zoning districts. Pole Signs are capped at 35 ft above mean average of lot. Most commercial signs in Havre require a permit.

Detailed Sign Ordinance Requirements for Havre, Montana

Sign Rules by Zoning District in Havre (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1035 ft above mean average of lot.672 sq ft display area per plot.Not listed
Freestanding Signs Prohibition (All Zones)1Not listedNot listedNot listed
Residential District2Not listed9 sq ftNot listed
Commercial District, Industrial District1Not listed32 sq ft for rigid temporary signs; overall temporary sign area max: 100 sq ft.Not listed

Zone-by-Zone Sign Requirements in Havre(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Pole Sign35 ft above mean average of lot.200 sq ft total for all pole signs facing one street frontage.Not listedNot listedNot listedSupports must be on private property. May not project over public property.Not listedUnlock4-6-16; 4-6-5; 4-6-7; 4-6-24
Ground SignNot listed672 sq ft display area per plot.Not listedMay not project beyond required building line setback for buildings in the zoning classification.Not listedMay not project over public property or beyond the required building line setback.Not listedUnlock4-6-17; 4-6-5; 4-6-7; 4-6-24
Roof SignNot listedNot listedNot listedNot listedNot listedAttached to the roof framing, walls and/or columns of the building, advertising display entirely above roof level.Not listedUnlock4-6-18; 4-6-7; 4-6-24
Wall SignShall not extend more than 12 inches above the highest point of parapet or roof supporting building.Not listedNot listedNot listedNot listedAttached to wall, face parallel to wall.Not listedUnlock4-6-19; 4-6-7; 4-6-24
Projecting SignNot listedNot listedNot listedNot listedNot listedProjects from and supported by building wall.Not listedUnlock4-6-20; 4-6-7; 4-6-24
Marquee SignNot listedNot listedNot listedNot listedNot listedPlaced on, attached to, or constructed in a marquee.Not listedUnlock4-6-23; 4-6-7; 4-6-24
Mobile or Portable SignNot listed50 sq ft per sideNot listedNot listedNot listedShall be placed on privately owned property.Not listedUnlock4-6-26; 4-6-10; 4-6-5
Bench SignNot listedNot listedMaximum 6 ft in length.Not listedOne bench per block faceOn public property (sidewalks, surfaced boulevards, adjacent property); placed on concrete pad.Not listedUnlock4-6-27; 4-6-5; 4-6-10

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Residential)Not listed9 sq ftNot listedNot listedNot listedNot listedNot listedUnlock4-6-25(A); 4-6-9(D); 4-6-9(H); 4-6-24
Bench Sign (Residential Use)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock4-6-27(E)

Commercial District, Industrial District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (Commercial/Industrial)Not listed32 sq ft for rigid temporary signs; overall temporary sign area max: 100 sq ft.Not listedNot listedNot listedNot listedNot listedUnlock4-6-25(A); 4-6-9(D); 4-6-9(H); 4-6-24

PermitPal covers all 4 zoning districts in Havre. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Havre

  • No sign shall be erected or placed in such a manner as to confuse or obstruct the view or interpretation of any official traffic sign, signal or device.
  • No sign shall exceed in area the requirements of the sign code.
  • No sign shall be constructed, enlarged, altered, moved or converted contrary to or in violation of any provisions of the chapter.
  • Signs or sign structures constructed or maintained in violation of the chapter are declared to be a public nuisance.
  • No excessively bright signs will be permitted; determination is at the discretion of the director of public works.
  • No blinking, strobe or other pulsating lights may be used on any sign.
  • Freestanding signs are prohibited on all tracts of ground located within the city.

Exempt Signs in Havre

  • Painting, repainting or cleaning of an advertising structure, or changing the advertising copy or message, does not require a sign permit unless a major structural change is made.
  • Flags or emblems of political, civic, philanthropic, educational, or religious organizations are exempt from permit requirements.
  • Signs of duly constituted governmental bodies, including traffic or regulatory devices and legal notices/warnings at railroad crossings, are exempt from permit requirements.
  • Temporary signs not exceeding nine square feet of surface area, or not more than two signs totaling not over eighteen square feet of surface area on any lot, are exempt from permit requirements.
  • Memorial plaques, cornerstones, historical tables and similar items are exempt from permit requirements.
  • Signs posted in conjunction with doorbells or mailboxes not exceeding 144 square inches in area are exempt from permit requirements.
  • Signs required to be maintained or posted by law or governmental order/rule/regulation are exempt from permit requirements, unless specifically prohibited, limited, or restricted.
  • Small, nonilluminated, non-projecting signs not exceeding four square feet in area, not otherwise prohibited, are exempt from permit requirements.
  • Construction signs giving the names of contractors and architect-engineers located on the construction site are exempt from permit requirements.
  • All signs that are entirely constructed, erected, and/or placed within the interior of the building served are exempt from permit requirements.
  • A sign placed upon the premises for the sole purpose of advertising said premises for sale or rent, provided the sign does not exceed nine square feet of display surface and is of a temporary nature, is exempt from permit requirements.

Sign Plan & Submission Notes for Havre

  • The inspector of buildings may require the filing of plans or other pertinent information with a sign permit application where, in his opinion, such information is necessary to ensure compliance with the chapter.
  • Designs of bench signs must be submitted in three copies to the department of public works and be approved prior to permit issuance.