Questions? Call us at (262) 218-2915

Sign Regulations in Bloomingdale Borough, New Jersey

Bloomingdale Borough, New Jersey has specific sign regulations covering 23 sign types across 3 zoning districts. Regulated sign types include Temporary Sign, Professional Nameplate, Nameplate or Identification Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Bloomingdale Borough, New Jersey

Sample Sign Requirements in Bloomingdale Borough

Sign TypeMax HeightMax AreaSetback
Professional NameplateNot listed8 x 20 inches (1.11 square feet)Not listed
Nameplate or Identification SignNot listed2 sq ftNot listed
Announcement SignNot listed8 x 20 inches (1.11 sq ft)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Bloomingdale BoroughFull Coverage

Sign Types Covered

23

  • Temporary Sign
  • Professional Nameplate
  • Nameplate or Identification Sign
  • Announcement Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bloomingdale Borough

Frequently Asked Questions

In Bloomingdale Borough, the height limit for Freestanding Sign (≥ 20 ft setback) in the General Business Zone and other zoning districts is 10 ft (Sec. 92-26.3H(6)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Bloomingdale Borough require a permit. From the submission notes on this page: Permit applications must include plans and specifications for review to ensure compliance with the ordinance. Run a code check for an exact address to see the permit requirements for that zone.

Bloomingdale Borough's sign code covers 23 sign types, including Temporary Sign, Professional Nameplate, Nameplate or Identification Sign, and Announcement Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: "Hex" signs on residential premises. The full list is on this page.

In Bloomingdale Borough, Freestanding Sign (≥ 20 ft setback) in the General Business Zone and other zoning districts must be set back at least 20 ft from front curbline (Sec. 92-26.3H(6)). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Bloomingdale Borough's sign ordinance that cover digital, changing, or flashing signs: Flashing signs as defined in § 92-26.3B are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Bloomingdale Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bloomingdale Borough, New Jersey, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Bloomingdale Borough, New Jersey Sign Rules at a Glance

Bloomingdale Borough, New Jersey regulates 23 sign types across 3 zoning districts. Directional Signs (off-premises, development) in the Residential zone district, residential districts are capped at 6 sq ft and 4 ft wide (Sec. 92-26.3N(6)). Most commercial signs in Bloomingdale Borough require a permit.

Detailed Sign Ordinance Requirements for Bloomingdale Borough, New Jersey

Sign Rules by Zoning District in Bloomingdale Borough (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1Not listedNot listedNot listed
Residential zone district, residential districts13Not listed24 sq ftNot listed
General Business Zone, M-1 Light Industrial Zone, M-1-Q Light Industrial and Quarry Zone, Bloomingdale Center District Zone, B-1-A Commercial Zone, R-20U Professional Business Office Zone918 ftMax 30% of principal sign; max 2 ft heightNot listed

Zone-by-Zone Sign Requirements in Bloomingdale Borough

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary SignNot listedNot listedNot listedNot listed2 per year/locale (10 for flea markets, garage sales and flea market max 6 signs per sale).All zones; allowed for up to 15 days, with one possible 15 day extension; maximum 2 per year per locale, except flea markets (10/year)Not listedUnlock§ 92-26.3F(1)-(3), § 92-26.3C(1), § 92-26.3L

Residential zone district, residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Professional NameplateNot listed8 x 20 inches (1.11 square feet)Not listedNot listedNot listedAffixed to the door or adjacent wall of residential premises in conformance with § 92-26BNot listedUnlock§ 92-26.3D(1), § 92-26.3G(3)
Nameplate or Identification SignNot listed2 sq ftNot listedNot listed1 per dwelling unit (2 for corner lots)On dwelling unit; corner lots may have a second sign facing the other streetNot listedUnlock§ 92-26.3N(1)
Real Estate SignNot listed6 sq ftNot listedNot listed2 per property, plus 2 more per additional frontageOn premises being offered for sale or letNot listedUnlock§ 92-26.3G(1), § 92-26.3N(2)
Institutional SignNot listed6 sq ftNot listedNot listed1 per property, 2 if on corner lotOn property of school, church, or other institution; max 1 per property, 2 if on a corner lot (one facing each street)Not listedUnlock§ 92-26.3N(3)
Parking Area - Entrance/Exit SignNot listed2 sq ftNot listedNot listed1 per exit/entranceAt each exit or entrance to a parking areaNot listedUnlock§ 92-26.3N(4)
Parking Area - Conditions/IdentityNot listed9 sq ftNot listedNot listed1 per parking area, 2 if corner lotAt parking area; 1 per area, 2 if corner lotNot listedUnlock§ 92-26.3N(4)
Development SignNot listed20 sq ftNot listedNot listed2 per property, plus 2 more per additional frontageOn developing property; 2 per property, plus 2 more per additional frontage if property fronts more than one streetNot listedUnlock§ 92-26.3N(5)
Directional Sign (off-premises, development)Not listed6 sq ft4 ftNot listed1 per 500 ft street frontageOff-premises; one per 500 feet of street frontageNot listedUnlock§ 92-26.3N(6)

General Business Zone, M-1 Light Industrial Zone, M-1-Q Light Industrial and Quarry Zone, Bloomingdale Center District Zone, B-1-A Commercial Zone, R-20U Professional Business Office Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Principal Sign3 ft (except freestanding, see below)15% of building frontage (front face)Not listedNot listed1 principal, 1 secondary per establishment (max 2). If corner lot: principal sign on each street.Attached parallel to wall facing street or parking, not above roofline or parapet; one per establishment/permitted useNot listedUnlock§ 92-26.3H(1)-(5), (8), (11), (12)
Secondary Sign - Off-Street Parking Entrance/Side Street2 ftMax 30% of principal sign; max 2 ft heightNot listedNot listed1 per permitted entrance/locationOn wall facing parking entrance or side street (for corner lots with pedestrian entrance)Not listedUnlock§ 92-26.3H(1), (1)(a), (1)(b)
Freestanding Sign (≥ 20 ft setback)10 ft12 sq ft per side (24 sq ft aggregate)Not listed≥ 20 ft from front curbline; ≥ 5 ft from property line1 per premisesWhere structure is set back at least 20 ft from front curbline. Not in ROW or required sight triangle, not closer than 5 ft to any property line.Not listedUnlock§ 92-26.3H(6)
Filling and Service Station Operation Signs - Over Entrance Door12 in letter heightNot listedNot listedNot listed1 per entranceOver individual entrance doorsNot listedUnlock§ 92-26.3H(9)(a)
Filling and Service Station Operation Signs - Gas PumpNot listedNot listedNot listedNot listed1 per gas pumpOn each gas pumpNot listedUnlock§ 92-26.3H(9)(b), (e)
Filling and Service Station Operation Signs - Credit CardNot listed1 sq ftNot listedNot listed1 per building or sign structureAffixed to building or permanent sign structureNot listedUnlock§ 92-26.3H(9)(c)
Filling and Service Station Operation Signs - Brand/Trade Name18 ft24 sq ft per side, 48 sq ft aggregateNot listedNot listed1 per building or sign structure, double sidedPermanently affixed to building or metal substructure; securely attached to ground; may be double sidedNot listedUnlock§ 92-26.3H(9)(d)
Awning/Canopy Sign (Flap/Vertical Plane)8 inNot listedNot listedNot listedNot listedOn flap or vertical plane of awning/canopyNot listedUnlock§ 92-26.3H(10)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Bloomingdale Borough with a free PermitPal account.

Run a free code check

Prohibited Signs in Bloomingdale Borough

  • All temporary signs are prohibited except those specifically allowed as provided by this section.
  • Advertising signs shall be prohibited in all residential districts except as provided by this section.
  • No permanent sign shall be placed or located or displayed upon a sidewalk.
  • No sign shall be permitted to be erected upon the roof of any structure.
  • No projecting sign as defined herein shall be permitted to be erected above any sidewalk.
  • No sign shall be in whole or in part, moving, revolving, or otherwise kinetic by design.
  • Signs containing exposed luminous tubing or lighting are prohibited except as specifically approved by this chapter.
  • Strings or streamers of flags, pennants, spinners, or other similar devices strung across, upon, over or along any premises or building, whether a part of any sign or not, shall not be allowed within any zone district, except those which shall be specifically exempted.
  • Flashing signs as defined in § 92-26.3B are prohibited.
  • No secondary sign shall be attached to or placed upon another sign.
  • No person shall place upon or attach to any tree or upon or to any telegraph, telephone or electric light pole in any street or highway within the Borough, any handbill, advertisement or written, printed or partly written or printed notice of any kind except such notices as are required by law to be posted.
  • Signs or advertising matter of an obscene nature are prohibited.
  • No billboard or billboard-type signs shall be erected.

Exempt Signs in Bloomingdale Borough

  • A professional nameplate affixed to the door or adjacent wall of residential premises used in conformance with § 92-26B, not to exceed eight inches by twenty (8 x 20) inches.
  • A memorial sign or tablet, or a sign indicating the name of a building, or the date of its erection, when cut into any masonry surface or when constructed of bronze or other noncombustible material.
  • Signs for public convenience and welfare erected by or on behalf of the United States, the State, the County and the Borough, legal notices posted by approved governmental officials or their designees, railroad crossing signs or other signs as required by law.
  • Celebration or seasonal-style flags on residential premises.
  • "Hex" signs on residential premises.

Sign Plan & Submission Notes for Bloomingdale Borough

  • Sign erection permits are required for any person to erect, relocate, reconstruct or alter any exterior sign regulated by this section within the Borough, and must be obtained from the Code Enforcement Official.
  • Permit applications must include plans and specifications for review to ensure compliance with the ordinance.
  • The Planning Board may waive requirements of this section where the applicant presents an overall sign plan to the Board indicating a detailed design vocabulary and placement and signage plan that is consistent with the purpose and intent of the chapter.

Source: ecode360 municipal code