Questions? Call us at (262) 218-2915

Sign Regulations in Collingswood Borough, New Jersey

Collingswood Borough, New Jersey has specific sign regulations covering 23 sign types across 5 zoning districts. Regulated sign types include Wall Sign, Window Sign (Permanent), Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Collingswood Borough, New Jersey

Sample Sign Requirements in Collingswood Borough

Sign TypeMax HeightMax AreaSetback
Wall Sign15 ft or bottom of second floor windowsill, whichever is lower24 sq ftNot listed
Awning SignNot listed16 sq ftNot listed
Projecting Sign or Icon Sign15 ft or bottom of second floor windowsill, whichever is lower6 sq ftMinimum 4 ft from street curbline

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Collingswood BoroughFull Coverage

Sign Types Covered

23

  • Wall Sign
  • Window Sign (Permanent)
  • Awning Sign
  • Projecting Sign or Icon Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Collingswood Borough

Municipal Code1 permit application link available

Frequently Asked Questions

In Collingswood Borough, the height limit for Freestanding Sign in the Professional Office District (POD) is 5 ft (Sec. 141-101C(3)(c)). The height limit for Wall Sign in the Professional Office District (POD) is 15 ft or bottom of second floor windowsill, whichever is lower (Sec. 141-101C(3)(b)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Collingswood Borough require a permit. From the submission notes on this page: A sign permit application must include a site plan indicating the location of the proposed signage; one application must list all existing and proposed nonexempted signs on a tax lot. Run a code check for an exact address to see the permit requirements for that zone.

Collingswood Borough's sign code covers 23 sign types, including Wall Sign, Window Sign (Permanent), Awning Sign, and Projecting Sign or Icon Sign. Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Official flags and signs are exempt from a sign permit requirement. The full list is on this page.

In Collingswood Borough, Freestanding Sign in the Highway Business District (HBD), Highway Industrial District (HID) must be set back 10 ft from right-of-way or front curb. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Collingswood Borough's sign ordinance that cover digital, changing, or flashing signs: Consecutively strung lights on nonresidential properties forming letters or numbers or blinking/flashing/tracking are prohibited, except existing time/temperature signs. In the CBD, POD, HBD, HID district or home professional office, signs with LED light strips or continuous series of lights to outline windows, signs, or building features are prohibited. Any sign displaying flashing or intermittent lights, rotating beams, or lights of changing degrees of intensity or color are prohibited, except signs indicating time or temperature. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Collingswood Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Collingswood Borough, New Jersey, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Collingswood Borough, New Jersey Sign Rules at a Glance

Collingswood Borough, New Jersey regulates 23 sign types across 5 zoning districts. Freestanding Signs in the Professional Office District (POD) are capped at 5 ft tall and 12 sq ft (Sec. 141-101C(3)(c)). Most commercial signs in Collingswood Borough require a permit.

Detailed Sign Ordinance Requirements for Collingswood Borough, New Jersey

Sign Rules by Zoning District in Collingswood Borough (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Central Business District (CBD)936 inches (base max 15 inches)72 in x 18 inNot listed
Professional Office District (POD)1015 ft or bottom of second floor windowsill, whichever is lower72 in x 18 inNot listed
Highway Business District (HBD), Highway Industrial District (HID)920 ft50% of wall or freestanding sign areaNot listed
Residential Zoning Districts (SF-D1, SF-D2, SF-D3, MFD)46 ft10 sq ftNot listed
General Regulations For All Zones85 ft24 in x 36 in per sign, max two per frontageNot listed

Zone-by-Zone Sign Requirements in Collingswood Borough(sample of 3 of 5 zones)

Central Business District (CBD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign15 ft or bottom of second floor windowsill, whichever is lower24 sq ftNot listedNot listedUp to 2 nonexempt signs per property; 3 for properties on multiple streets; no more than 2 on any single frontageOn host building facade, on architectural sign band if providedNot listedUnlock§141-101C(2)(b)[1]
Awning SignNot listed16 sq ftNot listedNot listedOne per storefrontPainted or sewn onto awningsNot listedUnlock§141-101C(2)(b)[3], §141-101D(10)
Projecting Sign or Icon Sign15 ft or bottom of second floor windowsill, whichever is lower6 sq ftNot listedMinimum 4 ft from street curblineOne per tax parcel (two if on corner lot)Perpendicular to building, not projecting at angle except at a cornerNot listedUnlock§141-101C(2)(b)[4], §141-101D(11)
Freestanding Sign36 inches (base max 15 inches)Not listedNot listedNot listedOne per lotAdjacent exterior to business, sidewalk/alcoveNot listedUnlock§141-101C(2)(b)[8], §141-101D(15)
Sandwich Board Sign3 ftNot listed2 ftNot listedOne per tax lotCurbside sidewalk or entrance alcove, adjacent to businessNot listedUnlock§141-101C(2)(b)[6], §141-101D(13)
Decorative FlagTop no more than 12 ft above sidewalk/ground15 sq ft3 ftNot listedOne per businessFlagpole on exterior; bottom of flag at least 7 ft above sidewalk/groundNot listedUnlock§141-101C(2)(b)[5], §141-101D(12)
Multiple Occupant/Tenant Sign6 ft (except projecting signs)8 sq ftNot listedNot listedOne per tax parcelFlush-mounted wall, projecting, or freestandingNot listedUnlock§141-101C(2)(b)[2], §141-101D(9)
Temporary Banner SignNot listed72 in x 18 in72 in (6 ft)Not listedOne per tax lot at a timeHung on exterior of business premisesNot listedUnlock§141-101C(2)(b)[7], §141-101D(14)

Professional Office District (POD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign15 ft or bottom of second floor windowsill, whichever is lower24 sq ftNot listedNot listedOne nonexempt sign per businessOn host buildingNot listedUnlock§141-101C(3)(b)
Freestanding Sign5 ft12 sq ftNot listedMinimum 5 ft from right-of-way or front curb line, and 10 ft from side yard lineOne nonexempt sign per businessCurbside or entrance alcove near businessNot listedUnlock§141-101C(3)(c)
Multiple Occupant/Tenant Sign6 ft (not projecting signs)8 sq ftNot listedNot listedOne per tax parcelFlush wall, projecting, or freestandingNot listedUnlock§141-101C(3)(d), §141-101D(9)
Awning SignNot listed16 sq ftNot listedNot listedOne per storefrontPainted/sewn to awningNot listedUnlock§141-101C(3)(e), §141-101D(10)
Projecting Sign or Icon Sign15 ft or bottom of second floor windowsill, whichever is lower6 sq ftNot listedAt least 4 ft from street curblineOne per tax parcel (two if on corner lot)Perpendicular to buildingNot listedUnlock§141-101C(3)(f), §141-101D(11)
Sandwich Board Sign3 ftNot listed2 ftNot listedOne per tax lotCurbside or entrance alcoveNot listedUnlock§141-101C(3)(h), §141-101D(13)
Decorative Flag12 ft above sidewalk/ground (top of flag)15 sq ft3 ftNot listedOne per businessMounted to exteriorNot listedUnlock§141-101C(3)(g), §141-101D(12)
Temporary Banner SignNot listed72 in x 18 in72 in (6 ft)Not listedOne per tax lot at a timeHung on exteriorNot listedUnlock§141-101C(3)(i), §141-101D(14)

Highway Business District (HBD), Highway Industrial District (HID)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign15 ft or bottom of second floor windowsill, whichever is lower40 sq ftNot listedNot listedUp to 2 signs/business; 3 allowed for multistreet properties; no more than 2 per frontageOn host buildingNot listedUnlock§141-101C(4)(a)[2]
Freestanding Sign20 ft30 sq ftNot listed10 ft from right-of-way or front curb; 10 ft from side yardUp to 2 signs/business; 3 for multistreet; 1 additional for rear parking frontageCurbside/entrance alcove; must meet general setback: 10 ft from right-of-way or front curb and 10 ft from side yardNot listedUnlock§141-101C(4)(a)[3]
Window Sign (Permanent)Not listedNot listedNot listedNot listedCounted toward sign totalFirst floor windowNot listedUnlock§141-101C(4)(a)[1]
Multiple Occupant/Tenant Sign6 ft (not projecting)8 sq ftNot listedNot listedOne per tax parcelFlush wall, projecting, or freestandingNot listedUnlock§141-101C(4)(a)[4], §141-101D(9)
Awning SignNot listed16 sq ftNot listedNot listedOne per storefrontAwning, painted or sewnNot listedUnlock§141-101C(4)(a)[5], §141-101D(10)
Projecting Sign or Icon Sign15 ft or bottom of second floor windowsill, whichever is lower6 sq ftNot listedAt least 4 ft from street curblineOne per tax parcel (two if corner)Perpendicular to buildingNot listedUnlock§141-101C(4)(a)[6], §141-101D(11)
Sandwich Board Sign3 ftNot listed2 ftNot listedOne per tax lotCurbside or entrance alcoveNot listedUnlock§141-101C(4)(a)[7], §141-101D(13)
Digital Display (Wall or Freestanding)Not listed50% of wall or freestanding sign areaNot listedNot listedSee wall/freestanding signsPermitted only as Wall Sign or Freestanding sign; HBD/HID onlyNot listedUnlock§141-101D(16)

PermitPal covers all 5 zoning districts in Collingswood Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Collingswood Borough

  • It is unlawful to erect, alter, maintain, use, reletter, move or otherwise have a sign without first obtaining a sign permit, unless the sign is expressly exempted.
  • It is unlawful to mount, hang, attach, erect, alter, maintain, use, reletter, move or otherwise have a sign protruding from, perpendicular to, or otherwise mounted to the outside wall/doorway of any structure without prior approval on the installation method.
  • No sign is permitted if it reduces or impairs pedestrian or vehicular traffic safety or the visual or architectural integrity of its building or streetscape.
  • No sign may exhibit excessive chipped or peeling paint or lettering, damaged or broken lettering or signboard, illegible material due to fading or obliteration, or dirty/torn/broken/damaged awning, canopy, projecting sign, or support structure.
  • Signs, lights and similar devices that imitate official traffic, warning, or governmental signs or may be confused as such are prohibited.
  • Signs located in any manner/place which constitute a hazard to pedestrian or vehicular traffic, block visibility, or obscure any traffic sign, signal, or device are prohibited.
  • Signs or lights reflecting or emitting a glaring light which could impair driver vision, reflected signs, and light-projected signs are prohibited.
  • Signs placed, reflected or cast on any curb, sidewalk, utility pole or structure, chimney, post, tree, rock, natural feature, fence, gate, abutment, retaining wall, embankment, hydrant, bridge, another sign, or other surface on, over or across any public right-of-way or property are prohibited.
  • Signs obstructing means of entrance or exit, light or air from any room or building, or located so as to provide less than seven feet clearance over a pedestrian walkway or head of an entry door are prohibited.
  • Signs placed above a structure's roofline or on an angled section of a roof are prohibited, except projecting and icon signs.
  • Changeable copy signs are prohibited except as explicitly permitted.
  • Portable or movable signs are prohibited, except sandwich board signs as permitted.
  • Moving signs, sequentially placed signs, or devices that move by flickering, rotating, spinning, or atmospheric/mechanical/electrical means are prohibited.
  • Floodlights, spotlights, and directed lights as part of sign illumination that are not hooded or shielded are prohibited if the light source is visible from a public right-of-way or adjacent property.
  • Signs containing or utilizing a beacon, spot, search, or stroboscopic light or reflector visible from any public right-of-way or adjacent property are prohibited, except as authorized by public agents.
  • Consecutively strung lights on nonresidential properties forming letters or numbers or blinking/flashing/tracking are prohibited, except existing time/temperature signs.
  • Except as permitted in Highway Business and Highway Industrial districts, internally illuminated signs (light box or backlit) or illuminated signs with nonopaque material are prohibited.
  • Billboards and other off-premises signs are prohibited, except for community bulletin boards on public property and otherwise as permitted.
  • Automobiles, trailers, or vehicles bearing signs/advertisements parked/stationary for more than 24 hours or not customarily used by the advertised business or its employees are prohibited as signs.
  • Signs advertising/promoting a specific individual, product, brand, or off-premises business/service/corporation are prohibited, except temporary advertising and permanent interior advertising signs.
  • In the CBD, POD, HBD, HID district or home professional office, signs with LED light strips or continuous series of lights to outline windows, signs, or building features are prohibited.
  • Any sign displaying flashing or intermittent lights, rotating beams, or lights of changing degrees of intensity or color are prohibited, except signs indicating time or temperature.

Exempt Signs in Collingswood Borough

  • Official flags and signs are exempt from a sign permit requirement.
  • Holiday and seasonal decorations, displays, and lights containing no advertising matter for a period not to exceed 45 days are exempt.
  • Residential occupant name and address signs identifying a house, apartment, or mailbox not exceeding one square foot are exempt.
  • Warning, no trespassing, private parking, and traffic directional signs on private property not exceeding two square feet are exempt.
  • Traffic circulation and directional signs on private property not exceeding two square feet are exempt.
  • Temporary business identification signs which meet ordinance conditions (§ 141-101D(1)) are exempt.
  • Door signs meeting ordinance conditions (§ 141-101D(2)) are exempt.
  • Temporary advertising signs and permanent interior advertising signs meeting ordinance conditions (§ 141-101D(3)) are exempt.
  • Community event announcements meeting ordinance conditions (§ 141-101D(5)) are exempt.
  • Real estate signs meeting ordinance conditions (§ 141-101D(6)) are exempt.
  • Construction signs meeting ordinance conditions (§ 141-101D(7)) are exempt.
  • Political signs meeting ordinance conditions (§ 141-101D(8)) are exempt.
  • Temporary signs for garage and yard sales conforming to Chapter 173, Garage Sales, are exempt.
  • Historical identification signs are exempt from a permit but must receive a certificate of appropriateness from the Historic Preservation Commission.

Sign Plan & Submission Notes for Collingswood Borough

  • A sign permit application must include a site plan indicating the location of the proposed signage; one application must list all existing and proposed nonexempted signs on a tax lot.
  • If the sign permit application is part of a site plan, subdivision, or variance application, the sign review procedures are incorporated into standard development review procedures.
  • A sign permit application must include a scale drawing of the proposed sign, logo, lettering, specifications for typeface, colors, position on building, methods of attachment, sign size calculations, materials, lighting, and coloring.
  • A sign permit application for an illuminated sign must include all lighting information, including intensity (lumens), manufacturer's data sheet, mounting information, and lumens plan (unless exempted for certain low-wattage external signs).
  • The sign plan (for illuminated signs) must indicate lighting intensity from the devices shining onto the sign and property/neighbors, as part of the sign plan submission.
  • Each sign shall be reviewed under general sign design guidelines and applicable zoning-district and specific sign standards (which includes consideration of type, size, appearance, materials, placement, color, lettering, lighting).
  • If a sign requires design waivers or a variance, the Zoning Officer refers it to the Planning Board for approval.
  • A professionally drawn scale sign plan, showing the building’s façade, architectural features, and the proposed sign’s location, color, texture, lettering style, mounting techniques, etc., is identified in the definitions and may be required as part of the application.

Source: ecode360 municipal code