Sign Regulations in Long Branch, New Jersey
Long Branch, New Jersey has specific sign regulations covering 20 sign types across 8 zoning districts. Regulated sign types include Identification Ground Sign, Identification Wall Sign, Identification Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 21, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Long Branch, New Jersey
Sample Sign Requirements in Long Branch
| Sign Type | Max Area | Setback |
|---|---|---|
| Temporary Ground Sign (Real Estate) | 9 sq ft per side | At least 5 ft inside property line |
| Temporary Ground Directional Sign (Real Estate Development) | 6 sq ft | Not listed |
| Parking Lot Marker / Permanent Directional Sign / Traffic Control Sign / Entrance or Exit Sign | 3 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
20
- Identification Ground Sign
- Identification Wall Sign
- Identification Projecting Sign
- Identification Wall or Ground Sign (Dwelling Unit)
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Long Branch
Long Branch, New Jersey Sign Rules at a Glance
Long Branch, New Jersey regulates 20 sign types across 8 zoning districts. Identification Ground Signs in the C-2, C-3, C-4, C-7 zoning districts are capped at 15 ft tall and 50 sq ft per side, set back 10 ft from property line (Sec. 284-9C). Most commercial signs in Long Branch require a permit.
Detailed Sign Ordinance Requirements for Long Branch, New Jersey
Sign Rules by Zoning District in Long Branch (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area |
|---|---|---|---|
| General Regulations For All Zones | 4 | Not listed | 9 sq ft per side |
| R-1, R-2, R-3, R-4, R-5, R-6, R-7 | 5 | 12 ft | 25 sq ft per side |
| R-8 | 3 | 12 ft | 25 sq ft per side |
| C-1 | 3 | Not listed | 12 sq ft per side |
| C-2, C-3, C-4, C-7 | 4 | 15 ft | 50 sq ft per side |
| S-1 | 4 | 10 ft | 12 sq ft per side |
| S-2 | 2 | Not listed | 8 sq ft per side |
| Industrial Zoning District | 3 | 15 ft | 50 sq ft per side |
Zone-by-Zone Sign Requirements in Long Branch(sample of 3 of 8 zones)
R-1, R-2, R-3, R-4, R-5, R-6, R-7
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|
| Identification Wall or Ground Sign (Dwelling Unit) | 2 ft (for ground sign) | 10 inches x 18 inches | 10 inches x 18 inches | Not listed | 1 per dwelling unit | On building (wall) or on ground (ground sign) per dwelling unit | Unlock | § 284-6A |
| Identification Wall or Ground Sign (Home Professional Office) | 2 ft (for ground sign) | 3 sq ft per side | Not listed | Not listed | 1 per property | Wall or ground | Unlock | § 284-6A |
| Ecclesiastical Changeable Letter Ground Sign (Church) | Not listed | 10 sq ft | Not listed | 10 ft from property line; 30 ft from street line | 1 | Ground sign | Unlock | § 284-6B |
| Identification Ground Sign (Institutional Uses: cemetery, beach club, schools, colleges, boardinghouses, hospitals, philanthropic/eleemosynary, nursing home) | 12 ft | 25 sq ft per side | Not listed | Not listed | 1 | Ground sign | Unlock | § 284-6C |
| Identification Wall or Ground Sign (Multiple-Family Dwelling) | Ground sign: 12 ft | Wall: 10 sq ft; Ground: 25 sq ft per side | Not listed | Not listed | 1 | Wall or ground | Unlock | § 284-6D |
C-2, C-3, C-4, C-7
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|
| Identification Wall Sign | Not listed | Not listed | Not listed | Not listed | Only 1 wall, projecting, or ground sign per lot; max 3 total | On one facade of building | Unlock | § 284-9A |
| Identification Projecting Sign | Not listed | 8 sq ft per side | Does not project more than 5 ft from wall | Not listed | Only 1 wall, projecting, or ground sign per lot; max 3 total | Projecting from building facade | Unlock | § 284-9B |
| Identification Ground Sign | 15 ft | 50 sq ft per side | Not listed | 10 ft from property line | Only 1 wall, projecting, or ground sign per lot; max 3 total | Ground sign; not closer than 10 ft to any property line | Unlock | § 284-9C |
| Directory-Of-Occupants Sign (Wall, Projecting, or Ground) | Not listed | 8 sq ft | Not listed | Not listed | 1 | May be wall, projecting, or ground | Unlock | § 284-9D |
S-1
| Sign Type | Max Height | Max Area | Max Width | Signs Allowed | Location | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|
| Identification Wall or Ground Sign (Dwelling Unit) | 2 ft (for ground sign) | 10 inches x 18 inches | 10 inches x 18 inches | 1 per dwelling unit | On building (wall) or ground (ground sign) per dwelling unit | Unlock | § 284-10A |
| Identification Wall or Ground Sign (Home Professional Office or Home Occupation) | 2 ft (for ground sign) | 3 sq ft per side | Not listed | 1 | On building (wall) or ground (ground sign) | Unlock | § 284-10A |
| Identification Ground Sign (Professional Office) | 10 ft | 12 sq ft per side | Not listed | 1 | Ground sign | Unlock | § 284-10B |
| Directory-Of-Occupants Wall Sign (Professional Office) | Not listed | 6 sq ft | Not listed | 1 | Wall sign | Unlock | § 284-10B |
PermitPal covers all 8 zoning districts in Long Branch. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Long Branch
- Commercial advertising billboard signs shall not be permitted except as set forth in § 284-14.
- Any signs which are not expressly validated elsewhere in this chapter shall not be permitted.
- All signs which do not conform to the specific requirements and standards set forth in this chapter are specifically prohibited.
- No sign or advertising structure shall be erected, altered, located, relocated, or maintained within the City except in conformance with the provisions of this chapter.
- No sign or advertising structure exceeding six square feet in area shall be erected or created until a permit has been secured.
- No sign or advertising structure shall be erected, placed, maintained, lighted or of such a color so that it impedes, interferes with or distracts from the operation of any traffic control device or general traffic safety.
- No sign or advertising structure shall be erected, maintained or lighted in a manner to interfere with traffic upon any public right-of-way or the peaceful and quiet enjoyment of any adjacent property.
- No sign or advertising structure shall be erected or maintained in other than a safe condition or be maintained in a state of disrepair.
- No sign or advertising structure shall include any flashing, blinking or series lights or any rotating or moving parts.
- No sign or advertising structure shall be erected or used upon the top or roof of any building, and no sign or advertising structure attached to a building shall project higher than the roofline of that building.
- No sign shall be painted directly on the wall of any building without the use of an advertising structure.
- No sign shall be placed or maintained on a utility pole.
- No sign regulated under this chapter shall exceed a height of 30 feet, measured from the ground to the top of the sign structure.
- No sign shall restrict vision other than by structural supports within the area between two feet above the ground and six feet above the ground when such sign is within 30 feet of any street line or public right-of-way.
- No signs, illustrations, or symbols shall be placed so as to interfere with the opening of an exit door of any building, to obstruct any window opening of a room in a dwelling, to interfere with the use of any fire escape, or to create a hazard to pedestrians.
- No person shall interfere with any City official or employee entering upon any premises between 9:00 a.m. and 9:00 p.m. for the purpose of examining any sign or advertising structure.
Exempt Signs in Long Branch
- Temporary window signs displayed inside business or industrial buildings, provided they do not cover more than 25% of the window area.
- Official signs.
- Theater bills and changeable copy signs, for the changing of copy on authorized signs, provided the wording does not conflict with regulations.
- Changing of matter advertised on authorized billboards and poster panels.
- A sign located within a building, not attached directly to or painted on a window and not located within 18 inches of a window or entrance.
- No more than two show cards not exceeding 28 inches by 22 inches in show windows of business establishments for a period not exceeding 30 days.
- Political signs, subject to restrictions stated in § 284-4G.
- On vacated property, one sign (max 6 square feet, for up to 60 days) giving the name, business and new address of the former occupant.
- Marquee signs or other signs, banners, or devices for which special permission may be granted by resolution of the City Council in each instance.
- Church bulletins not exceeding 20 square feet in area per church.
- Temporary permits may be granted at the discretion of the City for advertising matters of a public, semipublic or charitable character.
- Banners, streamers, and advertising flags to advertise openings and sale days, not displayed on any one property for more than 30 days in any calendar year.
Sign Plan & Submission Notes for Long Branch
- Parking lot markers, permanent directional signs, traffic control signs, and entrance/exit signs require the number and location of such signs to be approved by the Planning Board, which shall consider the degree to which such signs contribute to public safety as opposed to their advertising value.
- Applications before the Planning Board and Zoning Board of Adjustment for new structures or renovations east of the railroad tracks in the C-1 Zone must consider the Commercial Facade Design Kit for facades and signage.
- Permits are required for all signs greater than six square feet in area.
- An application for a sign permit must include the location and diagram of each sign and any information required by the Construction Code Official.
- If any person claims a special hardship by reason of any ruling, an appeal may be made to the Board of Adjustment.
- Special permission by resolution of the City Council may be required for certain marquee signs, banners, or devices in each instance.
Source: ecode360 municipal code
Other Cities in New Jersey
Frequently Asked Questions
In Long Branch, the height limit for Identification Ground Sign in the C-2, C-3, C-4, C-7 zoning districts is 15 ft (Sec. 284-9C). Maximum sign heights range from 10 ft to 15 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Long Branch require a permit. From the submission notes on this page: Applications before the Planning Board and Zoning Board of Adjustment for new structures or renovations east of the railroad tracks in the C-1 Zone must consider the Commercial Facade Design Kit for facades and signage. Run a code check for an exact address to see the permit requirements for that zone.
Long Branch's sign code covers 20 sign types, including Identification Ground Sign, Identification Wall Sign, Identification Projecting Sign, and Identification Wall or Ground Sign (Dwelling Unit). Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Official signs. The full list is on this page.
In Long Branch, Identification Ground Sign in the C-2, C-3, C-4, C-7 zoning districts must be set back 10 ft from property line (Sec. 284-9C). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Long Branch's sign ordinance that cover digital, changing, or flashing signs: No sign or advertising structure shall include any flashing, blinking or series lights or any rotating or moving parts. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Long Branch Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Long Branch, New Jersey, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds