Questions? Call us at (262) 218-2915

Sign Regulations in Mount Arlington Borough, New Jersey

Mount Arlington Borough, New Jersey has specific sign regulations covering 21 sign types across 5 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Nameplate and Identification Sign (Single-Family Dwelling). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Mount Arlington Borough, New Jersey

Sample Sign Requirements in Mount Arlington Borough

Sign TypeMax HeightMax AreaSetback
Nameplate and Identification Sign (Single-Family Dwelling)Not listed2 sq ftNot listed
Institutional Freestanding SignNot listed32 sq ftNot listed
Parking Area Entrance/Exit SignNot listed4 sq ft per signNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Mount Arlington BoroughFull Coverage

Sign Types Covered

21

  • Wall Sign
  • Freestanding Sign
  • Nameplate and Identification Sign (Single-Family Dwelling)
  • Institutional Freestanding Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Mount Arlington Borough

Municipal Code1 permit application link available

Frequently Asked Questions

In Mount Arlington Borough, the height limit for Freestanding Sign in the B-1 District is 20 ft (Sec. 17-24.8(c)(3)). Maximum sign heights range from 12 ft to 20 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Mount Arlington Borough require a permit. From the submission notes on this page: Each shopping center, industrial park, planned development, multi-tenanted structure, or multi-structure use must submit a signing plan to the Planning Board for approval. Run a code check for an exact address to see the permit requirements for that zone.

Mount Arlington Borough's sign code covers 21 sign types, including Wall Sign, Freestanding Sign, Nameplate and Identification Sign (Single-Family Dwelling), and Institutional Freestanding Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Political signs do not require a permit fee but must otherwise comply with temporary sign and general requirements. The full list is on this page.

This page doesn't list a single setback distance for signs in Mount Arlington Borough. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Mount Arlington Borough's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Mount Arlington Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Mount Arlington Borough, New Jersey, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Mount Arlington Borough, New Jersey Sign Rules at a Glance

Mount Arlington Borough, New Jersey regulates 21 sign types across 5 zoning districts. Freestanding Signs in the B-1 District are capped at 20 ft tall and 30 sq ft per side/surface (Sec. 17-24.8(c)(3)). Most commercial signs in Mount Arlington Borough require a permit.

Detailed Sign Ordinance Requirements for Mount Arlington Borough, New Jersey

Sign Rules by Zoning District in Mount Arlington Borough (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts6Not listed32 sq ftNot listed
RG-5 Zone2Not listed20 sq ftNot listed
B-1 District320 ft40 sq ftNot listed
Multi-Use Development, Shopping centers, Hotels, or Industrial Parks312 ft100 sq ft (up to 150 sq ft with approval)Not listed
General Regulations For All Zones9Not listed32 sq ftNot listed

Zone-by-Zone Sign Requirements in Mount Arlington Borough(sample of 3 of 5 zones)

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Nameplate and Identification Sign (Single-Family Dwelling)Not listed2 sq ftNot listedNot listed1 per dwelling unitOn dwelling unitNot listedUnlock§ 17-24.8(a)(1)
Institutional Freestanding SignNot listed32 sq ftNot listedNot listed1 per property, or 1 per street frontageOn property of institution: schools, colleges, churches, similarNot listedUnlock§ 17-24.8(a)(2)(a)
Institutional Wall SignNot listedNot listedNot listedNot listedUp to 2 walls per structureOn structure of institutionNot listedUnlock§ 17-24.8(a)(2)(b)
Parking Area Entrance/Exit SignNot listed4 sq ft per signNot listedNot listed1 per entrance/exitAt each exit/entrance to parking areaNot listedUnlock§ 17-24.8(a)(3)
Parking Area Conditions/Identity SignNot listed6 sq ftNot listedNot listed1 per parking areaIn parking areaNot listedUnlock§ 17-24.8(a)(3)
Private Driveway SignNot listed2 sq ftNot listedNot listedNot listedAt private drivewayNot listedUnlock§ 17-24.8(a)(3)

B-1 District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed40 sq ftNot listedNot listedTotal of up to 2 signs per establishmentOn exterior wall (excluding rear/side walls abutting residential/public/institutional uses)Not listedUnlock§ 17-24.8(c)(1)-(2)
Freestanding Sign20 ft30 sq ft per side/surfaceNot listedMinimum setback is 1/2 of required setback from any road right-of-way or property line1 per lotSetback at least half the setback distance from any abutting road right-of-way or property lineNot listedUnlock§ 17-24.8(c)(3)
For Sale or Rent Sign (Business Property)Not listed20 sq ftNot listedNot listedNot listedOn developed business propertyNot listedUnlock§ 17-24.8(c)(4)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional SignNot listedLess than 3 sq ftNo dimension exceeding 3 ftNot listedNot listedAs indicated on site planNot listedUnlock§ 17-24.8(e)(4), (e)(13)
Temporary Sign - Garage Sale (Residential)Not listedNot specifiedNot listedNot listed1 per yearOn same residential lot as saleNot listedUnlock§ 17-24.8(f)(1)
Temporary Sign - Grand Opening/Special EventNot listed6 sq ftNot listedNot listed1 per business/unit per yearOn same lot as special eventNot listedUnlock§ 17-24.8(f)(2)
Temporary Sign - Tradesman ServiceNot listedNot listedNot listedNot listedNot listedOn lot where service is providedNot listedUnlock§ 17-24.8(f)(3)
Temporary Sign - Real Estate (Individual)Not listed5 sq ftNot listedNot listedNot listedOn lot being sold/rentedNot listedUnlock§ 17-24.8(f)(4)
Temporary Sign - Development Sale/Rental (4+ Dwellings/Lots)Not listed32 sq ftNot listedNot listed1 per frontageOn property being developedNot listedUnlock§ 17-24.8(f)(5)
Temporary Sign - Land Sale/Lease (5+ acres, 500+ foot frontage)Not listed32 sq ftNot listedNot listedNot listedOn land being sold/leasedNot listedUnlock§ 17-24.8(f)(6)
Temporary Sign - GeneralNot listedNot listedNot listedNot listedNot listedPrivate property onlyNot listedUnlock§ 17-24.8(f)(7)-(12)

PermitPal covers all 5 zoning districts in Mount Arlington Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Mount Arlington Borough

  • No sign or sign structure shall obstruct a fire escape, door, window, or other required access way.
  • No sign shall be attached to a standpipe or fire escape, except those signs required by the municipal authority.
  • No sign shall project over, occupy or obstruct any window surface required for light or ventilation.
  • No sign or any part of a sign, except publicly owned or authorized signs, shall be placed in or extend into or over any public right-of-way if it impedes traffic or obscures visibility for safe travel.
  • No sign shall be affixed to any roof, tree, fence, utility pole, or other similar structure.
  • No sign shall be placed upon motor vehicles which are continually or repeatedly parked in a conspicuous location to serve as a sign.
  • Signs painted on pavement surfaces shall be restricted to traffic control markings only.
  • No signs shall use red, yellow, or green lighting within 100 feet of a traffic signal to avoid confusion with vehicular traffic signs.
  • No illuminated signs shall be permitted where the lighting constitutes a safety hazard to vehicular traffic.
  • No signs shall include wording that is obscene.
  • No signs shall simulate official, direction, or warning signs, or otherwise create confusion with those erected by government or public safety agencies.
  • No signs shall hide, conceal or obstruct from view any traffic or street sign or signal.
  • No sign shall distract the attention of the operator of a motor vehicle.
  • No placement of signs that interfere or otherwise obstruct the view of the vehicular and pedestrian traveling public.
  • All signs, unless specifically exempted, shall be placed upon private property and with the consent of the property owner.
  • Signs advertising the sale of goods, services or real estate that are not located on the same lot with such goods, services or real estate are prohibited.
  • Signs erected on trees and utility poles are prohibited.
  • Signs located within the right of way of any street are prohibited.
  • Signs determined by the Borough Engineer to pose an obstruction to the visibility of vehicles on, or entering onto, a street are prohibited.
  • Should a nonconforming sign be destroyed, it cannot be replaced except in a conforming manner.

Exempt Signs in Mount Arlington Borough

  • Directional signs having areas less than three square feet are exempt from area and location regulations but must be shown on an approved site plan and not constitute a hazard to the public.
  • Signs required by municipal authority may be attached to standpipes or fire escapes.
  • Publicly owned or authorized signs may be placed in or over the public right-of-way.
  • Nothing is intended to prohibit the placement of signs not exceeding three feet in any dimension, directing traffic or identifying various parking locations within a lot on light poles and utility poles erected therein.
  • Political signs do not require a permit fee but must otherwise comply with temporary sign and general requirements.

Sign Plan & Submission Notes for Mount Arlington Borough

  • Each shopping center, industrial park, planned development, multi-tenanted structure, or multi-structure use must submit a signing plan to the Planning Board for approval.
  • A signing plan must include details such as letter style and height, lighting, color, construction and materials, height of sign, height above grade or below roof line, locations, and standards.
  • The signing plan must be designed with an integrated design theme consistent with the architecture, materials, and landscaping of the principal structure.
  • The Planning Board, in its discretion, will determine if a proposed signing plan meets the goals and objectives.
  • For any sign regulated by this section, a permit must be obtained from the Borough Zoning Officer, including a plan showing details of the sign, dimensions, details of construction, location on a survey, and owner/lessee consent.
  • Directional signs (under three square feet) must still be shown on an approved site plan.
  • All permanent signs must submit construction details as part of the sign permit application.

Source: ecode360 municipal code