Sign Regulations in Park Ridge Borough, New Jersey
Park Ridge Borough, New Jersey has specific sign regulations covering 18 sign types across 2 zoning districts. Regulated sign types include Roof Sign, Moving/Mobile/Revolving Sign, Sign Attached to Tree/Utility Pole/Fence. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Park Ridge Borough, New Jersey
Sample Sign Requirements in Park Ridge Borough
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Professional Nameplate | Not listed | 2 sq. ft. | Not listed |
| Freestanding Sign (Institutional Use) | 8 ft. | 12 sq. ft. | Minimum setback = 1/2 of minimum required building setback for the zone |
| Temporary Sign (Election/Political) | Not listed | 16 sq. ft. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Roof Sign
- Moving/Mobile/Revolving Sign
- Sign Attached to Tree/Utility Pole/Fence
- Paper or Banner Window Sign
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Park Ridge Borough
Other Cities in New Jersey
Frequently Asked Questions
In Park Ridge Borough, the height limit for Freestanding Flagpole in the Residential district, Residential districts, RP District is 40 ft (freestanding); 15 ft above rooftop (if roof-mounted) (Sec. 101-34C(5)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Park Ridge Borough require a permit. From the submission notes on this page: Each site plan application shall include a sign plan showing the specific design, location, size, construction, and illumination in accordance with the Borough Sign Ordinance. Run a code check for an exact address to see the permit requirements for that zone.
Park Ridge Borough's sign code covers 18 sign types, including Roof Sign, Moving/Mobile/Revolving Sign, Sign Attached to Tree/Utility Pole/Fence, and Paper or Banner Window Sign. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Holiday decorations and lights on residential premises. The full list is on this page.
In Park Ridge Borough, Temporary Sign (Architect/Engineer/Contractor) in the Residential district, Residential districts, RP District must be set back at least 15 ft from any property line (Sec. 101-34C(2)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Park Ridge Borough's sign ordinance that cover digital, changing, or flashing signs: All animated signs which are environmentally or mechanically activated are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Park Ridge Borough Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Park Ridge Borough, New Jersey, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Park Ridge Borough, New Jersey Sign Rules at a Glance
Park Ridge Borough, New Jersey regulates 18 sign types across 2 zoning districts. Temporary Signs (Architect/Engineer/Contractor) in the Residential district, Residential districts, RP District are capped at 16 sq ft, set back at least 15 ft from any property line (Sec. 101-34C(2)). Most commercial signs in Park Ridge Borough require a permit.
Detailed Sign Ordinance Requirements for Park Ridge Borough, New Jersey
Sign Rules by Zoning District in Park Ridge Borough (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 7 | Not listed | Not listed | Not listed |
| Residential district, Residential districts, RP District | 11 | 40 ft (freestanding); 15 ft above rooftop (if roof-mounted) | 16 sq. ft. | Not listed |
Zone-by-Zone Sign Requirements in Park Ridge Borough
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Roof Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-35B |
| Moving/Mobile/Revolving Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-35C |
| Sign Attached to Tree/Utility Pole/Fence | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-35A |
| Paper or Banner Window Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Window | Not listed | Unlock | § 101-35F |
| Animated Sign (Environmentally or Mechanically Activated) | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-35G |
| Illuminated Sign (General) | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-39 |
| Temporary Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | § 101-38 |
Residential district, Residential districts, RP District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Professional Nameplate | Not listed | 2 sq. ft. | Not listed | Not listed | Not listed | On premises (at residence) | Not listed | Unlock | § 101-36B(1); § 101-34A(1) |
| Identification Sign (Multifamily Development) | Not listed | Not listed | Not listed | Not listed | Not listed | At development entrance/on site | Not listed | Unlock | § 101-36B(2); § 101-39J |
| Freestanding Sign (Institutional Use) | 8 ft. | 12 sq. ft. | Not listed | Minimum setback = 1/2 of minimum required building setback for the zone | 1 per public street frontage | On premises of house of worship, hospital, nursing home, continuing-care facility, school or similar public/semipublic use | Not listed | Unlock | § 101-36A(1)-(3); § 101-39J |
| Temporary Sign (Election/Political) | Not listed | 16 sq. ft. | Not listed | Not listed | Not listed | Entirely on private property | Not listed | Unlock | § 101-34C(8) |
| Temporary Sign (Architect/Engineer/Contractor) | Not listed | 16 sq. ft. | Not listed | At least 15 ft from any property line | Not listed | Worksite under construction (setback at least 15 ft from any property line) | Not listed | Unlock | § 101-34C(2) |
| Temporary Sign (Bulletin board for public/charitable/religious institutions) | Not listed | 16 sq. ft. | Not listed | Not listed | Not listed | On premises of institution | Not listed | Unlock | § 101-34C(1) |
| Traffic Directional Sign (on premises, non-advertising) | Not listed | 4 sq. ft. | Not listed | Not listed | Not listed | On site | Not listed | Unlock | § 101-34C(7) |
| Freestanding Flagpole | 40 ft (freestanding); 15 ft above rooftop (if roof-mounted) | Not listed | Not listed | At least equal to pole height from property line; In front yard, not closer to street than rear half of required front yard setback. | 1 per lot | On lot | Not listed | Unlock | § 101-34C(5) |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Park Ridge Borough with a free PermitPal account.
Run a free code checkProhibited Signs in Park Ridge Borough
- Any sign not specifically permitted is prohibited.
- Signs attached to a tree, utility pole, or fence are prohibited.
- No roof signs are permitted, nor may any portion of a sign extend or project above the highest elevation of the wall to which it is attached.
- No sign shall be, in whole or part, moving, mobile, or revolving.
- No sign shall be erected so as to interfere with the movement of vehicular or pedestrian traffic, including signs located in ADA required pathways and vehicular sight triangles.
- Paper or banner window signs are not permitted, except if temporary.
- All animated signs which are environmentally or mechanically activated are prohibited.
- Illuminated tubing outlining roofs, doors, windows, or wall edges of a building is prohibited.
- No sign shall be artificially illuminated after 11:00 p.m. or before 7:00 a.m. unless said premises are occupied and attended.
Exempt Signs in Park Ridge Borough
- Bulletin boards or signs not over 16 square feet in area for public, charitable, or religious institutions when located on the premises of said institutions.
- A sign identifying the architect, engineer, or contractor, when placed upon a work site under construction, only after a building permit for the construction has been issued; sign must not exceed 16 square feet and must be set back at least 15 feet from any property line, and removed within 24 hours after the final certificate of occupancy is issued.
- Memorial signs or tablets and date of building construction when cut into masonry or when constructed of bronze or other incombustible materials.
- Traffic or other municipal signs, legal notices, railroad crossing signs, danger signs, and such temporary, emergency, or nonadvertising signs or signs of any governmental agency deemed necessary to the public welfare.
- Flags of the United States, State of New Jersey, or other governmental or quasi-public agencies, provided certain height, quantity, and setback requirements are met.
- Holiday decorations and lights on residential premises.
- Signs erected to control the movement of traffic on a premises, provided these signs provide traffic directions only, are not used for any advertising purpose, do not exceed four square feet in area, and have been approved by the appropriate approving agency.
- Election or political signs, provided that said signs are placed entirely on private property and do not exceed 16 square feet in area.
Sign Plan & Submission Notes for Park Ridge Borough
- Each site plan application shall include a sign plan showing the specific design, location, size, construction, and illumination in accordance with the Borough Sign Ordinance.
- If the applicant is unable to provide details for signs in a site plan application, the approving authority shall condition its approval upon receipt of sign details prior to the issuance of a certificate of occupancy.
- Application for a permit for a sign which does not comply with the ordinance or which is part of a site plan (including nonconforming signs associated with a change in occupancy or ownership) shall be submitted to the appropriate approving authority, with notice and a public hearing where required by law.
- Signs associated with a change in occupancy or ownership, or nonconforming signs, require an application to the approving authority.
- Applications for freestanding signs must be submitted to the approving authority.
Source: ecode360 municipal code