Sign Regulations in Wanaque Borough, New Jersey

Wanaque Borough, New Jersey has specific sign regulations covering 23 sign types across 7 zoning districts. Regulated sign types include Wall Sign, Ground Sign, Window Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Wanaque Borough, New Jersey

Sample Sign Requirements in Wanaque Borough

Sign TypeMax HeightMax AreaSetback
Directional Sign (On Site)2 square feet2 feet from front property lines, 5 feet from side property lines
Temporary Sign (General Event)32 square feet (commercial and industrial zones); 9 square feet (residential zones)
Nameplate or Professional Sign6 inches x 18 inchesNone, except for nameplate sign <=1 sq ft, which may be anywhere in front yard.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Wanaque BoroughFull Coverage

Sign Types Covered

23

  • Wall Sign
  • Ground Sign
  • Window Sign
  • Directional Sign (On Site)
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Wanaque Borough

Frequently Asked Questions

Sign height limits in Wanaque Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Wanaque Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Wanaque Borough, regulated sign types include Wall Sign, Ground Sign, Window Sign, Directional Sign (On Site), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Wanaque Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Wanaque Borough are regulated with specific requirements for brightness, animation, and message duration. Wanaque Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Wanaque Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Wanaque Borough, New Jersey sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Wanaque Borough, New Jersey Sign Rules at a Glance

Wanaque Borough, New Jersey regulates 23 sign types across 7 zoning districts. Pole Sign (Ringwood Avenue)s in the Business Districts zoning district are capped at 16 feet tall, 50 square feet, and 8 feet (including support structure) wide, with a 10 feet from any property line setback (Sec. § 114-17C(4)(a)-(e)). Most commercial signs in Wanaque Borough require a permit.

Detailed Sign Ordinance Requirements for Wanaque Borough, New Jersey

Sign Rules by Zoning District in Wanaque Borough (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones632 square feet (commercial and industrial zones); 9 square feet (residential zones)
Residential Districts416 square feet
Business Districts1025 feet50 square feet
Redevelopment Districts 1 and 2 (RD-1 and RD-2)425 feet50 square feet
Redevelopment 1 (RD-1) District190 feet600 square feet (may be split over up to 2 display areas)
Industrial District224 inches (sign), 16 inches (characters), below second floor16 square feet (including all trim and supportive members)
Regional Commercial Zone125 feetNo more than 150 square feet per side unless approved by special application (see below).

Zone-by-Zone Sign Requirements in Wanaque Borough(sample of 3 of 7 zones)

Residential Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Nameplate or Professional Sign6 inches x 18 inchesNone, except for nameplate sign <=1 sq ft, which may be anywhere in front yard.1 per dwelling unitUnlock§ 114-17B(1), (4)
Sales or Rental Sign8 square feetNot within 10 feet of any property line.1 per propertyOn premises being sold or rented.Unlock§ 114-17B(2); § 88-23
Institutional Sign16 square feetMinimum 10 feet from property line1 per property, or 2 for multiple frontagesFor schools, colleges, churches or similar public/semi-public institutions; minimum of 10 feet from property line.Unlock§ 114-17B(3)
Trespassing/No Hunting Sign1 square footUnlock§ 114-17B(5)

Business Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign24 inches (sign), 16 inches (characters), located below second floor75% of facade width1 per building wall fronting streetOn wall fronting on a street, parallel to the face; below second floorUnlock§ 114-17C(1)
Awning Sign24 square feet1 per building wall fronting street (combined with wall/window sign rule)Canvas-only, attached to wall, may extend to curbline but not beyondUnlock§ 114-17C(2)
Window Sign15% of window surface1 per building wall fronting street (combined with wall/awning sign rule)Windows on first floorUnlock§ 114-17C(3)
Pole Sign (Ringwood Avenue)16 feet50 square feet8 feet (including support structure)10 feet from any property line1 per lotMinimum 10 feet from any property line, bottom at least 10 feet above ground level.Unlock§ 114-17C(4)(a)-(e)
Pole Sign (Union Avenue and Ringwood Avenue within 500ft of Union Ave intersection)25 feet50 square feet8 feet (including support structure)10 feet from any property line1 per lotMinimum 10 feet from any property line, bottom at least 10 feet above ground level.Unlock§ 114-17C(4)(a)-(e)
Ground Sign6 feet16 square feet (including all trim, moldings, etc.)6 feet (including supporting members)10 feet from property line1 per lotBottom of sign must be 2 feet above ground. Minimum 10 feet from property line.Unlock§ 114-17C(5)
Gas Station/Automotive Service Directional Sign (Over Bay/Entrance)12 inches (characters), one line1 per bay/entranceOn building wall over individual entrance doors or baysUnlock§ 114-17C(6)(a)
Temporary Help Wanted Sign2 feet x 3 feet per signMax 6 per lotOutdoors in ground (corrugated plastic, vinyl, or cardboard on wire frame); in windows; on entrancesUnlock§ 114-17C(7)

Redevelopment Districts 1 and 2 (RD-1 and RD-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign24 inches (sign), 16 inches (characters), located below second floor15% of facade width1 per building wall fronting streetOn wall fronting on a street, parallel to the face; below second floorUnlock§ 114-17D(1)
Window Sign15% of window surface1 per building wall fronting street (combined with wall/awning sign rule)Windows on first floorUnlock§ 114-17D(2)
Pole Sign - Redevelopment 2 (RD-2)25 feet50 square feet10 feet from property line1 per lotMinimum 10 feet from any property lineUnlock§ 114-17D(4)
Ground Sign6 feet16 square feet (including all trim, moldings, etc.)6 feet (including supporting members)10 feet from property line1 per lotBottom of sign must be 2 feet above ground. Minimum 10 feet from property line.Unlock§ 114-17D(5)

PermitPal covers all 7 zoning districts in Wanaque Borough — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 7 zones for Wanaque Borough — start free

Prohibited Signs in Wanaque Borough

  • No flashing, moving, rotating or apparent motion signs or lights, as well as streamers, pennants, and similar displays, are allowed.
  • No signs with more than two display faces are allowed.
  • No sign as permitted shall extend or project above the highest elevation of the wall to which it is attached, nor shall any sign be erected on or attached to the roof of a building.
  • No sign shall be painted on or affixed to water towers, storage tanks, smoke stacks or similar structures.
  • No private sign shall be erected within the right-of-way of any street, nor shall any sign be located so as to constitute a traffic hazard.
  • No sign shall be placed so as to interfere with or be mistaken for a traffic light or similar safety device or interfere with traffic visibility.
  • No signs shall be placed so as to impede or interfere in any way with the operation of a traffic light, traffic directional signal or general traffic vision.
  • No billboard or billboard signs shall be permitted.
  • No sign shall be placed, located or displayed upon any sidewalk.
  • Off-premises signs are prohibited in all districts.
  • Projecting signs are prohibited.
  • Back-lighted signs, with the exception of pole signs, are prohibited.
  • No neon or back-lighted window signs shall be permitted.
  • No sign shall be erected higher than the maximum heights specified for sign types and locations.
  • No sign shall be located on the roof or above the highest part of the front wall.
  • All signs shall be maintained in good repair. Lack of proper maintenance shall be considered abandonment and such signs shall be removed upon notification by the Building Inspector.
  • Structurally unsafe or dangerous signs must be made safe or removed upon order of the Building Inspector; otherwise may be removed without notice.
  • No off-site directional or advertising signs shall be permitted.
  • All illuminated signs must be indirectly lighted and not flash or be intermittently illuminated except for time/temperature signs.
  • Floodlights used for sign or building illumination shall not project light above the height of the highest wall elevation.
  • Pole signs must only advertise the business on the premises and be only internally illuminated.
  • Wall signs must only advertise uses, products, or services on the premises.
  • Any sign that constitutes a menace to the health, safety, morals or general welfare of the community must be remedied or removed.
  • No sign shall be placed so as to obscure or obstruct sight lines or impede or impair vehicular or pedestrian traffic.

Exempt Signs in Wanaque Borough

  • The limitations on signs prescribed in this chapter shall not apply to any sign or directional device erected by any governmental agency.
  • The limitations on signs prescribed in this chapter for permitted commercial and industrial uses shall not apply to parking lot markers, directional signs or entrance and exit signs erected on the premises, provided each such sign does not exceed two square feet in area, the number and location of such signs are approved by the Planning Board, and no such sign contains any advertising material.
  • No permit is required for temporary signs erected for a special event, such as an election or sale, provided that they do not exceed 32 square feet in commercial and industrial zones and nine square feet in residential zones, and are removed after the event.

Sign Plan & Submission Notes for Wanaque Borough

  • No signs shall be constructed, erected, displayed, altered, relocated or reconstructed unless a permit shall have first been obtained from the Building Inspector.
  • For temporary help wanted signs in business districts, anyone desiring to display signs must make application to the Wanaque Borough Clerk providing details about the signs and the length of time to display them.
  • For billboards, approval must be made by application to the Borough of Wanaque Planning Board, providing detailed plans, property surveys, and a fee.
  • For political signs, application must be made to the Wanaque Borough Clerk, providing the name and address of the applicant and a deposit.
  • For parking lot markers, directional signs, or entrance/exit signs exempted in commercial/industrial uses, the number and location must be approved by the Planning Board.

Source: ecode360 municipal code