Sign Regulations in Roswell, New Mexico

Roswell, New Mexico has specific sign regulations covering 20 sign types across 3 zoning districts. Regulated sign types include Apartment Complex Identification Sign, Wall Sign, Directional/Information Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Roswell, New Mexico

Sample Sign Requirements in Roswell

Sign TypeMax HeightMax AreaSetback
Monument Sign5 ft above average grade of nearest public right-of-way35 sq ft
Billboard Sign - Non-Digital45 ft from ground to highest point672 sq ft per side
Billboard Sign - Digital45 ft from ground to highest point672 sq ft per side

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RoswellFull Coverage

Sign Types Covered

20

  • Apartment Complex Identification Sign
  • Wall Sign
  • Directional/Information Sign
  • Subdivision Identification Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Roswell

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Roswell, monument signs are limited to 5 ft above average grade of nearest public right-of-way. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Roswell, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Roswell, regulated sign types include Apartment Complex Identification Sign, Wall Sign, Directional/Information Sign, Subdivision Identification Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Roswell vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Roswell are regulated with specific requirements for brightness, animation, and message duration. Roswell has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Roswell Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Roswell, New Mexico sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Roswell, New Mexico Sign Rules at a Glance

Roswell, New Mexico regulates 20 sign types across 3 zoning districts. Monument Signs in the Residential District zoning district are capped at 5 ft above average grade of nearest public right-of-way tall and 35 sq ft (Sec. Sec. 7.2 (A-H)). Most commercial signs in Roswell require a permit.

Detailed Sign Ordinance Requirements for Roswell, New Mexico

Sign Rules by Zoning District in Roswell (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District45 ft above average grade of nearest public right-of-way35 sq ft
Commercial/Industrial Districts (C-2, C-4, I-1, I-2)1145 ft from ground to highest point672 sq ft per side
General Regulations For All Zones86 sq ft DSA

Zone-by-Zone Sign Requirements in Roswell

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Subdivision Identification SignOne per entranceAt each entrance to a subdivisionUnlockSec. 6.1
Apartment Complex Identification SignOne per entranceAt each entrance to an apartment complexUnlockSec. 6.2
Wall SignUp to three per propertyUnlockSec. 7.1
Monument Sign5 ft above average grade of nearest public right-of-way35 sq ftOneUnlockSec. 7.2 (A-H)

Commercial/Industrial Districts (C-2, C-4, I-1, I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Billboard Sign - Non-Digital45 ft from ground to highest point672 sq ft per side25 ftAlong state or federal highways or as zoning allowsUnlockSec. 8.1; Sec. 10.B (all)
Billboard Sign - Digital45 ft from ground to highest point672 sq ft per side25 ftAlong state or federal highways or as zoning allowsUnlockSec. 8.1, 9; Sec. 10.B.2, 8; Sec. 10.C
Freestanding Sign / Monument Sign35 ft from natural grade to highest point; minimum 10 ft above ground for clearanceFreestanding signs: 5 ft from property lines; Monument/pole cover: 10 ft from property linesOne per lot (two if frontage exceeds 500 ft with 200 ft separation)On-premise; must meet setback requirementsUnlockSec. 8.2; Sec. 10.A.1-2
Apartment Complex Identification SignOne per entranceAt each entrance to apartment complexUnlockSec. 8.3
Directional/Information SignOn-premiseUnlockSec. 8.4; also see Sec. 3 (exempt)
Canopy/Awning SignOn-premiseUnlockSec. 8.5
Wall SignAttached to wall of buildingUnlockSec. 8.6
Projecting SignProjecting from buildingUnlockSec. 8.7

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Governmental Entity SignUnlockSec. 3.1
Construction SignOn property under constructionUnlockSec. 3.2
Directional/Information SignUnlockSec. 3.3
Temporary SignUnlockSec. 3.4
Enclosed Building SignInside a closed buildingUnlockSec. 3.5
NameplateUnlockSec. 3.6
Window SignWithin windowUnlockSec. 3.7
Hand-held Sign6 sq ft DSAHeld by an individualUnlockSec. 3.8

Illumination rules, size formulas, and permit requirements for every sign type in Roswell are available with a free PermitPal account.

Start free

Prohibited Signs in Roswell

  • It is unlawful to erect or place signs located in a residential district advertising a home occupation.
  • It is unlawful to erect or place signs which resemble official government signs or which could conflict in any way with the proper functioning or line-of-sight of any official traffic control device.
  • It is unlawful to erect or place signs which obstruct access or pose a safety hazard to pedestrians or motorists.
  • It is unlawful to erect or place signs incorporating any noisy mechanical device (whistles, horns, noise makers, sirens or any other noisy audible devices).
  • It is unlawful to erect or place signs located within the sight triangle of any property.
  • It is unlawful to erect or place signs attached or otherwise affixed in any way to utility poles, light poles, rocks, trees or other natural features that are located in, on, or over public right-of-way and/or any easements.
  • It is unlawful to erect or place any flashing and/or continuous scrolling freestanding display signs.
  • It is unlawful to erect or place signs within rights-of-way or easements, except signs abutting private property that are permitted by the property owner and otherwise conforming.
  • No sign shall be erected or maintained at any location where its position, working, illumination, shape, symbol, color, form, or character may obstruct, impair, obscure, interfere with the view of or may be confused with any authorized traffic sign, signal or device, or interfere with, mislead, confuse or disrupt traffic flow or traffic safety.
  • It is unlawful to change, modify, or otherwise deviate from the terms and conditions set forth in the original building permit application without written approval by the building inspector and the planning and zoning department.
  • It is unlawful to alter or modify an on-premise sign into a billboard sign and/or alter or modify a billboard sign into an on-premise sign without complying with this article.
  • Signs shall not have any exposed electrical components.
  • Signs shall not list or lean more than 15 degrees from their originally intended position.
  • Signs must be regularly maintained and kept in good and safe structural condition by the owner.

Exempt Signs in Roswell

  • Signs placed by a governmental entity are allowed without a building permit in all zoning districts.
  • Construction signs are allowed without a building permit in all zoning districts.
  • Directional/information signs are allowed without a building permit in all zoning districts.
  • Temporary signs relating to particular occurrences or events, including holidays, special events, real estate sales, garage sales, and elections, are allowed without a building permit if removed no later than five days after the occurrence or event.
  • Any sign located within the confines of an enclosed building is allowed without a building permit in all zoning districts.
  • Nameplates are allowed without a building permit in all zoning districts.
  • Window signs are allowed without a building permit in all zoning districts.
  • Any hand-held sign, symbol, or display on any person (not to exceed six square feet DSA) is allowed without a building permit in all zoning districts.

Sign Plan & Submission Notes for Roswell

  • Signs constructed or erected along any state or federal highway must apply and receive a sign permit from the New Mexico Department of Transportation per state statute.
  • A new sign, relocation of an existing sign, alteration of sign height, or varying the DSA of a sign (except those exempted in Section 3) requires a building permit from the city.
  • A request for a variance must comply with Article 3 of this appendix.
  • A site plan showing location of all necessary property lines to scale is required for sign setback compliance.

Source: municode municipal code