Sign Regulations in Amityville, New York
Amityville, New York has specific sign regulations covering 17 sign types across 9 zoning districts. Regulated sign types include Freestanding Sign, Wall Sign, Projecting Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Amityville, New York
Sample Sign Requirements in Amityville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Directional Sign | Not listed | 2 sq ft | Not listed |
| Awnings (Painted On) | 6 inches (height of lettering or message) | Not listed | Not listed |
| Name Sign | 5 ft (bottom above ground) | 2 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
17
- Freestanding Sign
- Wall Sign
- Projecting Sign
- Sign (General)
- +2 more types
Zoning Districts
9
Different zoning districts with specific sign regulations
Data Includes
- Height restrictions
- Illumination rules
Official Resources for Amityville
Other Cities in New York
Frequently Asked Questions
In Amityville, the height limit for Freestanding Sign in the Business District, Industrial District is 16 ft (Sec. 144-8A). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
From the submission notes on this page: Permit applications may be referred by the Code Enforcement Officer to the Planning Board for preliminary determination as to whether the proposed sign conforms with the ordinance. Run a code check for an exact address to see the permit requirements for that zone.
Amityville's sign code covers 17 sign types, including Freestanding Sign, Wall Sign, Projecting Sign, and Sign (General). The ordinance lists 5 exemptions. One of them: No permit shall be required for a contractor's sign not exceeding 16 square feet in area, provided that such sign is displayed at the premises where, and during the period when, the construction is being performed. The full list is on this page.
In Amityville, Real Estate Sign in the Residence District must be set back at least 15 feet from property line (Sec. 144-6B). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Amityville's sign ordinance that cover digital, changing, or flashing signs: All illuminated signs must be illuminated by a steady source and contain no moving or flashing parts. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Amityville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Amityville, New York, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Amityville, New York Sign Rules at a Glance
Amityville, New York regulates 17 sign types across 9 zoning districts. Freestanding Signs in the Business District, Industrial District are capped at 16 ft tall and 40 sq ft (Sec. 144-8A).
Detailed Sign Ordinance Requirements for Amityville, New York
Sign Rules by Zoning District in Amityville (9 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 6 | 6 inches (height of lettering or message) | 2 sq ft | Not listed |
| Residence District | 3 | 5 ft (bottom above ground) | 4 sq ft | Not listed |
| SC Senior Citizen Residence District | 1 | 10 ft | 20 sq ft | Not listed |
| TO Zoning District | 2 | 10 ft | 20 sq ft | Not listed |
| PR Zoning District | 2 | 10 ft | 40 sq ft (total) | Not listed |
| H Historical District | 1 | 10 ft | 20 sq ft | Not listed |
| PM Professional-Mixed Use District | 2 | 10 ft | 16 sq ft | Not listed |
| Business District, Industrial District | 7 | 16 ft | 40 sq ft | Not listed |
| Broadway Corridor Overlay District | 1 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Amityville(sample of 3 of 9 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Affixed to wall of structure; only on front face except corner lots in business district where permitting 2 signs. | Not listed | Unlock | §144-4A; §144-5F; §144-5J; §144-11 |
| Freestanding Sign | Not listed | Not listed | Not listed | Not listed | Limited to one, unless otherwise specified in zone-specific sections. | Freestanding on ground, supported by uprights, not attached to a structure. Not to project beyond property line. | Not listed | Unlock | §144-4B; §144-5G |
| Window or Inside Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Interior of building, visible from public or private street or parking. | Not listed | Unlock | §144-4C |
| Projecting Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Attached to building facade, awning, or canopy; perpendicular to facade. | Not listed | Unlock | §144-4D |
| Directional Sign | Not listed | 2 sq ft | Not listed | Not listed | Not to exceed number of approved ingresses/egresses. | Not listed | Not listed | Unlock | §144-5I |
| Awnings (Painted On) | 6 inches (height of lettering or message) | Not listed | Not listed | Not listed | Not listed | Valance of awnings over a shop window facing a public street or parking area. | Not listed | Unlock | §144-10B |
Residence District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Name Sign | 5 ft (bottom above ground) | 2 sq ft | Not listed | Not listed | 1 per lot | Not listed | Not listed | Unlock | §144-6A |
| Real Estate Sign | 5 ft (bottom above ground) | 4 sq ft | Not listed | At least 15 feet from property line | 1 per lot | Not listed | Not listed | Unlock | §144-6B |
| Constitutionally Protected Noncommercial Message Sign | 5 ft (bottom above ground) | 4 sq ft | Not listed | Not listed | 1 per lot | Not listed | Not listed | Unlock | §144-6C |
Business District, Industrial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 16 ft | 40 sq ft | Not listed | Not listed | 1 per building | Outside of every building on the lot. | Not listed | Unlock | §144-8A |
| Wall Sign (Main Entrance) | Not listed | Not listed | Not listed | Not listed | 1 per lot (plus exceptions for corner/rear entrance) | On wall facing street. | Not listed | Unlock | §144-8B |
| Wall Sign (Rear Entrance) | Not listed | Not listed | Not listed | Not listed | 1 per rear entrance wall | On rear wall facing municipal parking lot | Not listed | Unlock | §144-8B |
| Window Sign (Permanent) | Not listed | 6 sq ft | Not listed | Not listed | 1 per window | Each window | Not listed | Unlock | §144-8C(1) |
| Window Sign (Paper/Temporary) | Not listed | 30% of window area (cumulative); minimum size 2 sq ft | Not listed | Not listed | Not listed | Each window | Not listed | Unlock | §144-8C(2) |
| Theater Sign (Wall) | Not listed | 30 sq ft | Not listed | Not listed | 1 | Theater building front wall above main entrance | Not listed | Unlock | §144-8D |
| Projecting Sign | Min 7.5 ft, Max 12 ft above ground | 4 sq ft per sign | Not listed | Not listed | 1 per business at each premises | Not listed | Not listed | Unlock | §144-8E |
PermitPal covers all 9 zoning districts in Amityville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Amityville
- Billboards, whether freestanding or attached to a building or other structure, are specifically prohibited in the Village of Amityville.
- No sign shall project above the parapet or eaves or roofline, whichever is the lowest part of the structure on which it is erected.
- No sign or any part thereof shall project more than 12 inches from the wall to which it is affixed.
- No sign shall cover wholly or partially any wall opening or project beyond the ends of the wall to which it is attached.
- No sign or any part thereof shall project beyond any property line.
- No sign shall be constructed, erected or located that will obstruct visibility with respect to the safety of motorists or pedestrians proceeding along a public way or entering or leaving a lot.
- All illuminated signs must be illuminated by a steady source and contain no moving or flashing parts.
- Illumination that could be confused with traffic signals shall not be green, red or orange-yellow.
- No signs may be constructed, erected, maintained, altered, or moved on a lot on which exists a nonconforming sign, unless all signs on such lot are made to conform.
- No signs, except directional or traffic signs, shall be permitted on public streets or rights-of-way.
- No billboards shall be permitted.
- No wind flags, wind socks, balloons or inflatable signs shall be permitted.
- No neon-illuminated signs shall be permitted without a variation from the Planning Board, except for one "open" neon sign of specified size and characteristics.
- No sign within a building shall be illuminated in such a manner as to distract passing motorists.
- No sign shall be erected on a roof or extend above a parapet wall.
- No types of signs shall be erected or maintained except as provided in this chapter.
Exempt Signs in Amityville
- Signs conveying the flag or insignia of any nation or group of nations or of any governmental agency or subdivision are not considered 'signs' under this chapter.
- The provisions of this chapter shall not prohibit the erection and maintenance of signs on a marquee or canopy, provided that permission for the erection and maintenance of such marquee or canopy has been duly obtained and is in effect.
- Signs not exceeding six inches in height may be painted on or applied to the valance of awnings over a shop window facing a public street or parking area.
- No permit shall be required for a contractor's sign not exceeding 16 square feet in area, provided that such sign is displayed at the premises where, and during the period when, the construction is being performed.
- Paper or temporary window signs may be placed in a window for not more than 30 consecutive days without a permit, provided the date such signs are placed in the window is conspicuously set forth on the face of each sign.
Sign Plan & Submission Notes for Amityville
- A sign permit is required to erect, construct, alter, paint, repaint, relocate, reconstruct, upgrade or display any illumination or signs, except authorized signs in a residence district.
- A sign permit will only be issued if the proposed sign conforms to all applicable provisions of the Code; otherwise, a variation must be granted by the Planning Board.
- Permit applications may be referred by the Code Enforcement Officer to the Planning Board for preliminary determination as to whether the proposed sign conforms with the ordinance.
- A variation (variance) for nonconforming signs requires a public notice and hearing before the Planning Board.
- Installation of most neon-illuminated signs requires a variation (variance) from the Planning Board, except for a single qualifying 'open' sign.
Source: ecode360 municipal code