Sign Regulations in Chestnut Ridge, New York
Chestnut Ridge, New York has specific sign regulations covering 16 sign types across 8 zoning districts. Regulated sign types include Temporary For Sale/For Rent Sign, Freestanding Business Identification Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Chestnut Ridge, New York
Sample Sign Requirements in Chestnut Ridge
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Name Plate Sign | Not listed | 4 square feet | 10 feet from designated street line (unless on mailbox) |
| Temporary For Sale/For Rent Sign | Not listed | 15 square feet | 15 feet from designated street line |
| Nonresidential Establishment Identification Sign - Option 1 (Freestanding) | Not listed | 20 square feet | 10 feet from designated street line |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
16
- Temporary For Sale/For Rent Sign
- Freestanding Business Identification Sign
- Wall Sign
- Name Plate Sign
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Chestnut Ridge
Other Cities in New York
Frequently Asked Questions
In Chestnut Ridge, the height limit for Freestanding Business Identification Sign in the NS District is 10 feet. The height limit for Wall Sign in the RS District is 5 feet. Maximum sign heights range from 8 feet to 15 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Chestnut Ridge require a permit. From the submission notes on this page: If there is neither a sign plan approval nor site development plan approval, the applicant must submit an application to the Planning Board for either site development plan approval or sign plan approval, whichever is applicable. Run a code check for an exact address to see the permit requirements for that zone.
Chestnut Ridge's sign code covers 16 sign types, including Temporary For Sale/For Rent Sign, Freestanding Business Identification Sign, Wall Sign, and Name Plate Sign. Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Signs posted or erected pursuant to and in the discharge of any governmental function or required by any law, ordinance or governmental regulation. The full list is on this page.
In Chestnut Ridge, Nonresidential Establishment Identification Sign - Option 1 (Freestanding) in the Residential Districts must be set back 10 feet from designated street line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Chestnut Ridge's sign ordinance that cover digital, changing, or flashing signs: Flashing signs, including any sign or device on which the artificial light is not maintained stationary and constant in intensity and color at all times when in use. Animated signs, whether by mechanical or electrical processes, including signs with banners, streamers, spinners or other paraphernalia attached to or associated with such signs. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Chestnut Ridge Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Chestnut Ridge, New York, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Chestnut Ridge, New York Sign Rules at a Glance
Chestnut Ridge, New York regulates 16 sign types across 8 zoning districts. Directory Signs in the RS District are capped at 15 feet tall and 80 square feet, with a 10 feet setback. Most commercial signs in Chestnut Ridge require a permit.
Detailed Sign Ordinance Requirements for Chestnut Ridge, New York
Sign Rules by Zoning District in Chestnut Ridge (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential Districts | 5 | Not listed | 20 square feet | Not listed |
| Nonresidential Districts | 2 | Not listed | 32 square feet | Not listed |
| NS District | 3 | 10 feet | 40 square feet | Not listed |
| PO, LO, PILO Districts | 2 | 10 feet | 40 square feet (PO), 60 square feet (LO, PILO) | Not listed |
| PO-R District | 1 | 8 feet | 30 square feet (20 sq ft if frontage within 150 ft of residential district) | Not listed |
| NS, PO, LO, PILO Districts | 1 | Not listed | Not listed | Not listed |
| RS District | 5 | 15 feet | 80 square feet | Not listed |
| General Regulations For All Zones | 2 | Not listed | Per other applicable subsection (e.g., 32 sq ft for temporary signs) | Not listed |
Zone-by-Zone Sign Requirements in Chestnut Ridge(sample of 3 of 8 zones)
Residential Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Name Plate Sign | Not listed | 4 square feet | Not listed | 10 feet from designated street line (unless on mailbox) | 1 per residence | Anywhere on property, subject to 10 ft setback if not on mailbox | Not listed | Unlock | §290-41A(1)(a) |
| Temporary For Sale/For Rent Sign | Not listed | 15 square feet | Not listed | 15 feet from designated street line | 1 | On property | Not listed | Unlock | §290-41A(1)(b) |
| Temporary Special Event Sign (Nonprofit/Charitable/Educational) | Not listed | Not listed | Not listed | Not listed | Not listed | On property | Not listed | Unlock | §290-41A(1)(c) |
| Nonresidential Establishment Identification Sign - Option 1 (Freestanding) | Not listed | 20 square feet | Not listed | 10 feet from designated street line | 1 | At least 10 feet from any designated street line | Not listed | Unlock | §290-41A(2); §290-41C(1)(a) |
| Nonresidential Establishment Identification Sign - Option 2 (Wall) | Not listed | Not listed | Not listed | Not listed | 1 | Front facade of principal building | Not listed | Unlock | §290-41A(2); §290-41C(1)(b) |
NS District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Building with One Use) | Not listed | 40 square feet | Not listed | Not listed | 1 | Building facade facing frontage street(s) | Not listed | Unlock | §290-41C(2)(b) |
| Wall Sign (Building with Multiple Uses) | Not listed | Not listed | 70% of facade length (per use) | Not listed | 1 per use | Facade facing frontage street(s) | Not listed | Unlock | §290-41C(2)(c) |
| Freestanding Business Identification Sign | 10 feet | 40 square feet | Not listed | 10 feet from designated street line | 1 per frontage street | Lot facing each frontage street; minimum 10 ft setback | Not listed | Unlock | §290-41C(2)(f); §290-41C(2)(g) |
RS District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Directory Sign | 15 feet | 80 square feet | Not listed | 10 feet | 1 per road frontage with vehicular access | 10 feet minimum from designated street line, placed so sight distance is not affected | Not listed | Unlock | §290-41C(2)(i)[1] |
| Wall Sign | 5 feet | 80 square feet (120 sq ft for frontage ≥100 feet) | Not listed | Not listed | 1 per wall facing vehicular access per tenant | Building wall facing road/driveway with vehicular access | Not listed | Unlock | §290-41C(2)(i)[3] |
| Hanging Shingle/Bracket Sign | Not listed | 8 square feet | Not listed | Not listed | 1 per tenant | Under sidewalk overhang | Not listed | Unlock | §290-41C(2)(i)[4] |
| Window Sign | 8 inches | Not listed | Not listed | Not listed | Not listed | Directly to interior of window or hung inside within 3 ft of window (prohibited on exterior) | Not listed | Unlock | §290-41C(2)(i)[5] |
| Temporary For Sale/For Rent Sign | Not listed | 32 square feet | Not listed | Not listed | 1 | Not listed | Not listed | Unlock | §290-41C(2)(i)[2]; §290-41B(1) |
PermitPal covers all 8 zoning districts in Chestnut Ridge. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Chestnut Ridge
- Posting or displaying any sign on or over or attached to any structure or other thing on or over any public property is unlawful except as expressly permitted.
- Any signs not expressly permitted by this chapter are prohibited.
- Flashing signs, including any sign or device on which the artificial light is not maintained stationary and constant in intensity and color at all times when in use.
- Exterior advertising signs and billboards.
- Signs representing or depicting to any degree official traffic signs or signals.
- Signs which emit noise, sounds or smoke.
- Animated signs, whether by mechanical or electrical processes, including signs with banners, streamers, spinners or other paraphernalia attached to or associated with such signs.
- Signs of a prurient nature or advertising businesses, commodities or services of a prurient nature or any unlawful business or undertaking.
- Illuminated signs outlining any part of a building, such as a gable, roof, sidewall or corner.
- Signs made of cardboard, paper or similar impermanent material.
- Signs mounted on parked vehicles or trailers or other similar mobile advertising media, except signs advertising the vehicle for sale.
- Signs which project over a street.
- Signs obstructing traffic visibility.
- Signs not in conformity with an approved sign permit or an approved sign plan or site development plan are prohibited.
- Signs shall not be placed, painted or drawn upon trees, rocks or natural features on the site, or on utility poles, bridges, culverts, towers or similar structures.
Exempt Signs in Chestnut Ridge
- Temporary signs may be posted on public property if procedures and limitations in §221-4 are followed: filing a notice with the Village Clerk, payment of security deposit, timing, size, and removal requirements.
- Signs conforming to the New York State Department of Transportation Manual of Uniform Traffic Control Devices and other traffic regulatory signs shown on an approved site development plan or required pursuant to an order of municipal traffic control agencies are exempt from the requirement for sign permits.
- Accessory signs permitted by right in residential districts without Planning Board approval or sign permit: one sign for a residence (up to 4 sf), one temporary, nonilluminated 'for sale' or 'for rent' sign (up to 15 sf), and temporary 'special event' signs held by nonprofit charitable or educational corporations (subject to time limitations).
- Directional signs permitted in all districts as accessory to any use requiring site development plan review, if located as determined by the Planning Board.
- Signs posted or erected pursuant to and in the discharge of any governmental function or required by any law, ordinance or governmental regulation.
Sign Plan & Submission Notes for Chestnut Ridge
- No sign permit shall be issued except as shown on an approved site development plan or sign plan approved by the Planning Board.
- No sign permit shall be issued except in accordance with a sign plan approval or a site development plan approval.
- If there is neither a sign plan approval nor site development plan approval, the applicant must submit an application to the Planning Board for either site development plan approval or sign plan approval, whichever is applicable.
- Applications for sign plan approvals (which are not part of a site development plan application) must include specific drawings showing elevation view, dimensions, area, materials, and location.
- No permit shall be issued for any sign except in conformity with an approved sign plan or site development plan.
- All signs permitted in the Village shall comply with the application requirements and procedures as set forth in Article VIII, §§290-36, 290-37, and 290-39.
Source: ecode360 municipal code