Sign Regulations in Clinton Town, New York
Clinton Town, New York has specific sign regulations covering 11 sign types across 4 zoning districts. Regulated sign types include All Permanent Signs (Aggregate Limit), Freestanding Sign (Multiple Establishments), Wall/Projecting Sign (Multiple Establishments). Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 3, 2026
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Clinton Town, New York
Sample Sign Requirements in Clinton Town
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Bulletin Board (Church/Public Noncommercial Use) | Not listed | 15 sq ft | Not listed |
| Development Identification Sign | Not listed | 12 sq ft | Not listed |
| Temporary Business Opening Sign | Not listed | 12 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
11
- All Permanent Signs (Aggregate Limit)
- Freestanding Sign (Multiple Establishments)
- Wall/Projecting Sign (Multiple Establishments)
- Bulletin Board (Church/Public Noncommercial Use)
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
Official Resources for Clinton Town
Other Cities in New York
Frequently Asked Questions
We haven't published Clinton Town's sign height limits on this page yet. Run a code check for an exact address to see them.
Most commercial signs in Clinton Town require a permit. From the submission notes on this page: A separate application for a sign permit is not necessary when all required sign information is included as part of a site plan approval application. Run a code check for an exact address to see the permit requirements for that zone.
Clinton Town's sign code covers 11 sign types, including All Permanent Signs (Aggregate Limit), Freestanding Sign (Multiple Establishments), Wall/Projecting Sign (Multiple Establishments), and Bulletin Board (Church/Public Noncommercial Use). Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Traffic or other municipal signs. The full list is on this page.
We haven't published Clinton Town's sign setback rules on this page yet. Run a code check for an exact address to see them.
Rules in Clinton Town's sign ordinance that cover digital, changing, or flashing signs: Illuminated signs or lighting devices must only employ constant intensity lights; no flashing, intermittent, rotating, or moving lights or strings of lights allowed for advertising or attention except as part of a sign. Run a code check for an exact address to see the rules for that zone.
Ready to Research Clinton Town Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Clinton Town, New York, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Clinton Town, New York Sign Rules at a Glance
Clinton Town, New York regulates 11 sign types across 4 zoning districts. Development Identification Signs are capped at 12 sq ft (Sec. 250-70D(3)). Most commercial signs in Clinton Town require a permit.
Detailed Sign Ordinance Requirements for Clinton Town, New York
Sign Rules by Zoning District in Clinton Town (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 6 | Not listed | 15 sq ft | Not listed |
| Hamlet Districts | 4 | Not listed | 30 sq ft (total); 10% of building frontage | Not listed |
| AR5 District, AR3 District, C District, CR1 District, MR1 District | 1 | Not listed | 20 sq ft | Not listed |
| Office-Light Industry District (I) | 3 | Not listed | 50 sq ft (aggregate, cannot exceed 15% of building frontage) | Not listed |
Zone-by-Zone Sign Requirements in Clinton Town(sample of 3 of 4 zones)
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Bulletin Board (Church/Public Noncommercial Use) | Not listed | 15 sq ft | Not listed | Not listed | 1 per lot (included in limit of 3 total signs per lot) | Not listed | Not listed | Unlock | 250-70D(2) |
| Development Identification Sign | Not listed | 12 sq ft | Not listed | Not listed | 1 per entrance | At each entrance of real estate, apartment or subdivision development | Not listed | Unlock | 250-70D(3) |
| Temporary Business Opening Sign | Not listed | 12 sq ft | Not listed | Not listed | 1 per street front | Per street front | Not listed | Unlock | 250-70D(4) |
| Utility Identification Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 250-70D(5) |
| Legal/Public Welfare Sign | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | 250-70D(6) |
| Directional Sign (Off-premises, farm products/farm stand) | Not listed | Not listed | Not listed | Not listed | 2 per lot | Off-premises | Not listed | Unlock | 250-70D(7), 250-70D(8) |
Hamlet Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| All Permanent Signs (Aggregate Limit) | Not listed | 30 sq ft (total); 10% of building frontage | Not listed | Not listed | Not listed | All signs on the building and/or freestanding on lot | Not listed | Unlock | 250-70E(1) |
| Freestanding Sign (Multiple Establishments) | Not listed | 20 sq ft | Not listed | Not listed | 1 per center/facility | At entrance, identifying only name of center/facility, no advertising matter. | Not listed | Unlock | 250-70E(2)(a) |
| Wall/Projecting Sign (Multiple Establishments) | Not listed | Not listed | Not listed | Not listed | Not listed | Applied to building face per establishment | Not listed | Unlock | 250-70E(2)(b) |
| Gasoline Station Sign (Aggregate Face) | Not listed | 30 sq ft (aggregate, includes canopy) | Not listed | Not listed | Not listed | At gasoline station, including canopy | Not listed | Unlock | 250-70E(4) |
Office-Light Industry District (I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| All Permanent Signs (Aggregate Limit) | Not listed | 50 sq ft (aggregate, cannot exceed 15% of building frontage) | Not listed | Not listed | Not listed | On building or lot | Not listed | Unlock | 250-70G(1) |
| Freestanding Sign (Multiple Establishments) | Not listed | 20 sq ft | Not listed | Not listed | 1 per center/facility | At entrance, identifying only name of center/facility, no advertising matter. | Not listed | Unlock | 250-70E(2)(a), referenced by 250-70G(2) |
| Wall/Projecting Sign (Multiple Establishments) | Not listed | Not listed | Not listed | Not listed | Not listed | Applied to building face per establishment | Not listed | Unlock | 250-70E(2)(b), referenced by 250-70G(2) |
PermitPal covers all 4 zoning districts in Clinton Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Clinton Town
- Signs are an accessory use only; signs are not permitted as a principal use.
- Each sign shall pertain to a use conducted on the same property, except certain small organization signs and as otherwise permitted.
- Illuminated signs or lighting devices must only employ constant intensity lights; no flashing, intermittent, rotating, or moving lights or strings of lights allowed for advertising or attention except as part of a sign.
- No illuminated sign or lighting device shall be placed or directed in a manner that causes glare or reflection constituting a nuisance or traffic hazard on public streets, highways, sidewalks, or adjacent premises.
- Signs shall not be internally illuminated, nor constructed with sequins or fluorescent paint.
- No sign or part may contain or consist of moving or revolving parts; such devices shall not be used for advertising or attention unless part of a sign.
- No sign shall have more than two faces; identical back-to-back signs may count as one sign.
- Portable freestanding or A-type signs are not permitted, except as provided in Subsection H.
- No advertising sign shall attempt or appear to regulate, warn or direct highway traffic or imitate official traffic signs, signals, or devices.
- No sign shall obscure any signs displayed by a public authority; obstruct proper sight distance or interfere with traffic or pedestrians; obstruct any door, window, ventilation, fire escape, or exit; or cause other hazards to public health and safety.
- No sign shall be attached to a tree or utility pole or painted on or affixed to any natural feature.
- No sign or support for any sign shall be placed on the roof of any building.
- No wall sign attached parallel to a building shall project more than 12 inches from the face.
- No sign attached perpendicular to a building shall project more than 6 feet from the building.
- No sign shall overhang onto adjacent property or right-of-way, except over a building line up to 4 feet.
- No sign in the window of a building, visible from any street or highway, may occupy more than 25% of the window area.
- No sign shall exceed 10 feet in height or extend above the façade of the building to which it is attached.
- Each sign shall be constructed of wood, metal, or other durable material approved by the Planning Board; plastic signs are not permitted except as allowed by Subsection H.
Exempt Signs in Clinton Town
- One sign per lot, not exceeding two square feet, identifying the occupant of the premises.
- One sign per lot, not exceeding three square feet, identifying a permitted home occupation.
- One non-illuminated sign per lot, advertising sale, lease, or rental of the premises or denoting an architect, engineer, or contractor on premises where work is in progress (up to 6 sq ft, or 30 sq ft in Office-Light Industry District).
- One sign per lot, not exceeding eight square feet, identifying a permitted farming operation or roadside stand.
- Changing message content (but not design or format) on approved signs.
- "No trespassing" signs, not exceeding two square feet.
- Temporary signs related to political campaigns or events of civic, philanthropic, educational, or religious institutions (max 12 sq ft and max 45 days).
- Memorial or historical signs, names, and dates if cut or cast into permanent materials, not exceeding six square feet.
- Traffic or other municipal signs.
- Legal notices or temporary/emergency/non-advertising signs as authorized by the Town Board.
- U.S., state, and local flags, except when used for commercial or sales promotion.
- Signs not visible from outside the lot on which they are placed.
- Existing and compliant signs as of the effective date of the ordinance.
- Security system identification signs.
Sign Plan & Submission Notes for Clinton Town
- The location of signs may be determined by the Planning Board during the site plan review process, when required.
- When there is more than one establishment on a single lot in the hamlet or Office-Light Industry districts, an overall sign design plan is required and subject to site plan review; the plan must reflect reasonable uniformity of design, lettering, lighting, and materials.
- For signs requiring permits, the Planning Board may suggest alternatives for informational content, lettering, and decorative elements.
- A separate application for a sign permit is not necessary when all required sign information is included as part of a site plan approval application.
Source: ecode360 municipal code