Sign Regulations in East Aurora, New York

East Aurora, New York has specific sign regulations covering 16 sign types across 6 zoning districts. Regulated sign types include Wall Sign, Sandwich Board Sign, Temporary Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for East Aurora, New York

Sample Sign Requirements in East Aurora

Sign TypeMax HeightMax AreaSetback
Directional Sign3 ft6 sq ft (residential); 12 sq ft (nonresidential)
Sign on Gasoline Pump6 sq ft per sign
Historical Sign6 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for East AuroraPartial Coverage

Sign Types Covered

16

  • Wall Sign
  • Sandwich Board Sign
  • Temporary Sign
  • Ground Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions
  • Illumination rules

Official Resources for East Aurora

Frequently Asked Questions

Sign height limits in East Aurora vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in East Aurora, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In East Aurora, regulated sign types include Wall Sign, Sandwich Board Sign, Temporary Sign, Ground Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in East Aurora vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in East Aurora are regulated with specific requirements for brightness, animation, and message duration. East Aurora has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research East Aurora Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to East Aurora, New York sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

East Aurora, New York Sign Rules at a Glance

East Aurora, New York regulates 16 sign types across 6 zoning districts. Pedestal Signs in the General Commercial district (GC) zoning district are capped at 15 ft tall and 32 sq ft, with a 10 ft setback (Sec. Table 44.9B).

Detailed Sign Ordinance Requirements for East Aurora, New York

Sign Rules by Zoning District in East Aurora (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones73 ft6 sq ft (residential); 12 sq ft (nonresidential)
Residential districts (R)46 ft12 sq ft
General Commercial district (GC)815 ft32 sq ft
Neighborhood Commercial district (NC), Village Center district (VC), Village Manufacturing district (VM)87 ft32 sq ft
General Manufacturing district (GM)515 ft32 sq ft
Open Space district (OS)47 ft32 sq ft

Zone-by-Zone Sign Requirements in East Aurora(sample of 3 of 6 zones)

General Commercial district (GC)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Pedestal Sign15 ft32 sq ft10 ft1 per lotSign face parallel to streetUnlockTable 44.9B
Wall Sign5 ft1 per facadeOn facade; projects ≤12 inchesUnlockTable 44.9C
Projecting Sign3 ft8 sq ft1 per useProjects more than 12 in but less than 36 in from facade; minimum clearance 8 ft above ground to bottom of signUnlockTable 44.9D
Suspended Sign3 ft8 sq ft1 per useAttached to and supported by underside of horizontal plane; minimum clearance 8 ftUnlockTable 44.9E
Awning Sign6 in1 per awningBottommost edge of awning/canopy (valence); minimum clearance 8 ftUnlockTable 44.9F
Window SignAnyApplied or attached to interior or exterior window, or within 12 in of windowUnlockTable 44.9G; § 285-44.7B(3)
Sandwich Board Sign4 ft6 sq ft1 per useUnlockTable 44.9H
Temporary Sign4 ft32 sq ft1 per useUnlockTable 44.9I

Neighborhood Commercial district (NC), Village Center district (VC), Village Manufacturing district (VM)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Ground Sign7 ft16 sq ft5 ft1 per lotSign face parallel to streetUnlockTable 44.9A
Wall Sign4 ft1 per facadeOn facade; projects ≤12 inchesUnlockTable 44.9C
Projecting Sign2 ft6 sq ft1 per useProjects more than 12 in but less than 36 in from facade; min. clearance 8 ft above ground to bottom of signUnlockTable 44.9D
Suspended Sign2 ft6 sq ft1 per useAttached to and supported by underside of horizontal plane; min. clearance 8 ftUnlockTable 44.9E
Awning Sign6 in1 per awningBottommost edge of awning/canopy (valence); min. clearance 8 ftUnlockTable 44.9F
Window SignAnyApplied or attached to interior or exterior window, or within 12 in of windowUnlockTable 44.9G; § 285-44.7B(3)
Sandwich Board Sign4 ft6 sq ft1 per useUnlockTable 44.9H
Temporary Sign4 ft32 sq ft1 per useUnlockTable 44.9I

General Manufacturing district (GM)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Pedestal Sign15 ft32 sq ft10 ft1 per lotSign face parallel to streetUnlockTable 44.9B
Wall Sign5 ft1 per facadeOn facade; projects ≤12 inchesUnlockTable 44.9C
Window SignAnyApplied or attached to interior or exterior window, or within 12 in of windowUnlockTable 44.9G; § 285-44.7B(3)
Sandwich Board Sign4 ft6 sq ft1 per useUnlockTable 44.9H
Temporary Sign4 ft32 sq ft1 per useUnlockTable 44.9I

PermitPal covers all 6 zoning districts in East Aurora — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 6 zones for East Aurora — start free

Prohibited Signs in East Aurora

  • No sign shall be erected in such a manner as to obstruct free egress from a window, door or fire escape or to become a menace to life, health or property.
  • No sign shall be erected at or near any intersection of streets, alleys, or railways in a manner that obstructs free and clear vision for pedestrians, bicyclists, and motorists.
  • No sign shall be of a shape or color that may be confused with any authorized traffic control device.
  • No rotating beam, beacon, or flashing illumination resembling an emergency light shall be used with any sign display.
  • Signs shall not be erected within nor project into any public right-of-way, unless otherwise specified within this article.
  • Off-premises signs are prohibited. All signs shall be located on the site being promoted, identified, or advertised with the exception of temporary signs.
  • No permanent sign may be constructed of untreated or unpainted wood, sandblasted metal, or other unfinished material.
  • No sign or any part of a sign exceeding three feet in height, other than a supporting pole or brace no greater than 18 inches in width or diameter, shall be located within the designated clear sight triangle of any intersecting streets.
  • Light sources for illuminated signs shall not be of such brightness as to constitute a hazard to pedestrians or motorists and shall be shielded so as not to cast an illumination of more than two footcandles on adjacent nonresidential properties or more than 0.1 footcandle on adjacent residential properties.
  • Intermittent illumination or illumination which involves movement or causes the illusion of movement resulting from the arrangement of lighting, is prohibited.
  • Any sign that no longer advertises or identifies the current or permitted use of the property must be removed within 30 days after written notification from the CEO.
  • Signs for which no sign permit was issued or for which a sign permit has been revoked.
  • Signs that are not properly maintained, considered structurally unsound, hazardous, or otherwise unsafe.
  • Signs that contain words or pictures of an obscene or pornographic nature.
  • Signs that emit audible sounds, odor, or visible matter.
  • Signs placed on a curb, sidewalk, hydrant, utility pole, trees or other objects located on or over any public street unless otherwise permitted by the Village Board.
  • Signs that may be confused with a traffic control sign, signal or device or the light of an emergency or road equipment vehicle or hide from view any traffic or street sign, signal, or device.
  • Signs that flash, blink, rotate, or revolve, and/or utilize unshielded lighting devices or reflectors to outline or provide the background of a sign.
  • Internally illuminated signs and signs that utilize exposed neon tubing for letters or lighting.
  • Signs that are mounted on wheels or mounted on any structure on wheels.
  • Signs mounted on or applied to registered or unregistered vehicles unless such vehicle is parked legally or out of public view.
  • Signs with mirrors or any other reflective material.
  • Signs painted directly on walls or other structural building features except by special use permit from the Village Board.
  • Manual changeable copy signs, electronic changeable copy signs, and signs that are animated or utilize full motion or video technology.
  • Banners, pennants, windblown or inflated signs (unless specifically permitted as temporary signs).
  • Roof signs, obsolete signs, off-premises signs, and billboards.

Exempt Signs in East Aurora

  • The repainting, repairing, changing of parts, and maintenance of signs does not require a permit, provided such maintenance, changes, or alterations do not in any way alter the physical size, design, or nature of the sign.
  • A change in the message of a sign does not require a permit, provided such maintenance, changes, or alterations do not in any way alter the physical size, design, or nature of the sign.
  • Directional signs that meet the specified size, height, illumination, and location requirements do not require a permit.
  • Signs attached to a gasoline pump that do not exceed six square feet in area per sign do not require a permit.
  • Any official sign, public notice, or warning sign supported by federal, state, or local law is exempt and has no size requirements or time limits.
  • Historical signs such as cornerstones, commemorative tablets, and historical markers that are less than six square feet in area and not illuminated do not require a permit.
  • Incidental signs containing no commercial message that conform to size and illumination limits do not require a permit.
  • Signs within a building not legible from the public right-of-way or adjacent lots, or any sign within an enclosed outdoor space (e.g., athletic field) where such sign is not legible beyond the property lines are exempt.
  • Lawn signs that meet specified size, height, duration, and illumination restrictions do not require a permit.
  • Noncommercial signs on a residential property (meeting quantity, size, illumination, and attachment restrictions) do not require a permit.

Sign Plan & Submission Notes for East Aurora

  • No person shall erect, alter, construct, relocate, or cause to be erected, altered, constructed, or relocated any sign without first having obtained a sign permit from the CEO, unless otherwise stated in this article.
  • New development subject to review and approval by the Village Board or Planning Commission, at the request of the applicant, may have proposed signage reviewed and approved as part of the special use permit or site plan review process.
  • All required sign permit application materials shall be provided to the reviewing board as part of the complete application.
  • Any sign permit application for a marquee sign shall require review and approval by the Village Board.
  • Alteration of any sign for which a permit has been issued shall not be modified, relocated, altered, or replaced, unless an amended or new sign permit is obtained from the CEO.

Source: ecode360 municipal code