Questions? Call us at (262) 218-2915

Sign Regulations in Elmsford, New York

Elmsford, New York has specific sign regulations covering 24 sign types across 3 zoning districts. Regulated sign types include Real Estate Sign, Residence Identification Sign, Identification Sign for Nonresidence. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Elmsford, New York

Sample Sign Requirements in Elmsford

Sign TypeMax HeightMax AreaSetback
Residence Identification SignNot listed2 sq. ft.Not listed
Identification Sign for NonresidenceNot listed8 sq. ft.Not listed
Real Estate SignNot listed4 sq. ft.Behind property line

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for ElmsfordFull Coverage

Sign Types Covered

24

  • Real Estate Sign
  • Residence Identification Sign
  • Identification Sign for Nonresidence
  • Contractor's Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Elmsford

Municipal Code3 permit application links available

Frequently Asked Questions

In Elmsford, the height limit for Pole Sign in the Business districts, Industrial districts is 15 ft. (top of sign) (Sec. 273-21B(3)). The height limit for Wall Sign in the Business districts, Industrial districts is 2 ft. for each ground-floor establishment or other establishment (Sec. 273-21B(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Elmsford require a permit. From the submission notes on this page: All sign permit applications must be referred by the Building Inspector to the Architectural Review Board for review and approval. Run a code check for an exact address to see the permit requirements for that zone.

Elmsford's sign code covers 24 sign types, including Real Estate Sign, Residence Identification Sign, Identification Sign for Nonresidence, and Contractor's Sign. Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: "No trespassing" signs. The full list is on this page.

This page doesn't list a single setback distance for signs in Elmsford. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Elmsford's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Elmsford Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Elmsford, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Elmsford, New York Sign Rules at a Glance

Elmsford, New York regulates 24 sign types across 3 zoning districts. Real Estate Signs in the Residential districts are capped at 4 sq ft (Sec. 273-21A(3)). Most commercial signs in Elmsford require a permit.

Detailed Sign Ordinance Requirements for Elmsford, New York

Sign Rules by Zoning District in Elmsford (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential districts5Not listed16 sq. ft.Not listed
Business districts, Industrial districts1815 ft. (top of sign)Up to 20 sq. ft.Not listed
General Regulations For All Zones2Not listedNot exceeding 16 sq. ft. for campaign/charitable event; not exceeding 100 sq. ft. for other temporary signs, unless otherwise specified; signs in excess of 60 sq. ft. must be made of rigid materialsNot listed

Zone-by-Zone Sign Requirements in Elmsford

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Residence Identification SignNot listed2 sq. ft.Not listedNot listed1On the property of the residential unitNot listedUnlock§273-21A(1)
Identification Sign for NonresidenceNot listed8 sq. ft.Not listedNot listed1On the building or at any street frontage where there is an entrance driveNot listedUnlock§273-21A(2)
Real Estate SignNot listed4 sq. ft.Not listedBehind property line1Behind property line in area free from pedestrian trafficNot listedUnlock§273-21A(3)
Contractor's SignNot listed16 sq. ft.Not listedNot listedNot listedProperty where work is being performedNot listedUnlock§273-21A(4)
All other signs (Variance Required) - Option 1Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§273-21A(5)

Business districts, Industrial districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign2 ft. for each ground-floor establishment or other establishmentUp to 10% of wall areaNot wider than front of establishmentNot listedNot listedAttached flush to the wall of building; on a wall facing public street, interior courtyard, or off-street parking area serving the establishmentNot listedUnlock§273-21B(1)
Projecting Sign12 ft. above ground/sidewalk (top of sign); Not less than 8 ft. above ground/sidewalk (bottom of sign)8 sq. ft.Not listedNot listedNot listedHung from a bracket attached to the wall of a building; no part may project higher than the front wallNot listedUnlock§273-21B(2)
Pole Sign15 ft. (top of sign)16 sq. ft.Not listedBehind property line or sidewalk lineNot listedHung from post permanently set in ground behind property line or sidewalk lineNot listedUnlock§273-21B(3)
Freestanding Sign8 ft. (top of sign)Up to 20 sq. ft.Not listedBehind property line or sidewalk lineNot listedPermanently set in ground behind property line or sidewalk lineNot listedUnlock§273-21B(4)
Multiple Nameplate SignNot listed2 sq. ft. per sign; total area of all nameplates not to exceed 10 sq. ft.Not listedNot listed1 per parking entranceOn bracket or postNot listedUnlock§273-21B(5)
Identification Sign (Additional Entrance)Not listed2 sq. ft.Not listedNot listed1 per entrance (other than principal)At each public entrance other than the principal entranceNot listedUnlock§273-21B(6)
Real Estate SignNot listed8 sq. ft.Not listedBehind property line1Behind property line in area free from pedestrian trafficNot listedUnlock§273-21B(9)
Freestanding Service Station or Garage SignNot less than 8 ft. (bottom); not more than 15 ft. (top)16 sq. ft.Not listedNot listed1Over private propertyNot listedUnlock§273-21B(11)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Sign (as defined by §273-16 and §273-26)Not listedNot exceeding 16 sq. ft. for campaign/charitable event; not exceeding 100 sq. ft. for other temporary signs, unless otherwise specified; signs in excess of 60 sq. ft. must be made of rigid materialsNot listedNot listedNot listedAs defined per use typeNot listedUnlock§273-16, §273-26
Exempt Sign TypesNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§273-16

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Elmsford with a free PermitPal account.

Run a free code check

Prohibited Signs in Elmsford

  • It is unlawful to erect, repair, alter, or relocate any sign without first obtaining a permit from the Building Inspector.
  • No sign shall be erected, relocated or maintained so as to prevent free ingress to or egress from any door, window or fire escape.
  • No sign of any kind shall be attached to a standpipe or fire escape.
  • No sign shall be erected at the intersection of any streets in such a manner as to obstruct free and clear vision.
  • No sign shall be erected at any location where, by reason of position, shape or color, it may interfere with, obstruct the view of or be confused with any authorized traffic sign, signal or device.
  • No sign shall use the words STOP, LOOK, DRIVE-IN, DANGER or any other word, phrase, symbol or character in such manner as to interfere with, mislead or confuse traffic.
  • The following sign types are prohibited: flashing or intermittently illuminated signs, searchlights, strings of incandescent lights (except holiday decorations), moving or rotating signs, pennants, streamers or other eye-catching devices, portable signs (with or without wheels, including easel-type, A-frame or other sign not permanently affixed), and new roof signs.
  • V-shaped signs, consisting of two single-faced signs erected without a cover over the top of the sign, are not permitted.
  • All signs must be designed and constructed to withstand a wind pressure of not less than 40 pounds per square foot and dead loads as required in the Building Code.
  • No advertising shall be placed on any awning or canopy, except for the name of the owner and the business/industry/pursuit conducted within the premises (in a space not exceeding eight inches in height on front and sides).
  • Projecting signs exceeding 10 square feet in area or 50 pounds in weight shall not be attached to/support by frame buildings or wooden framework.
  • No new roof signs shall be permitted under this chapter.
  • Temporary signs must be removed after 30 days, unless otherwise provided.

Exempt Signs in Elmsford

  • Real estate signs not exceeding four square feet in residential districts and eight square feet in other districts, advertising the sale, rental or lease of the premises and the name, logo, address and telephone number of the broker or agent.
  • Professional nameplates not exceeding two square feet in area.
  • Bulletin boards not over eight square feet in area for public, educational, charitable or religious organizations or institutions, located on the premises.
  • Signs denoting the architect, engineer or contractor, when placed upon property where work is being performed, not exceeding 16 square feet.
  • Occupational signs denoting the name and profession of an occupant in a commercial building, public institutional building or dwelling house, not exceeding two square feet in area.
  • Memorial signs, tablets, name of a building and date of erection when cut into any masonry surface or constructed of bronze or other incombustible material.
  • Traffic or other governmental signs, including any temporary emergency or danger sign.
  • Flags of national, state, county or municipal government not exceeding 24 square feet, or banners of public, educational, charitable or religious organizations or institutions not exceeding 24 square feet (owners/occupants may temporarily display a larger flag or banner with prior approval of Building Inspector).
  • Temporary signs, not exceeding 16 square feet, pertaining to and displayed during a campaign, drive or event of a political, public, educational, charitable or religious organization or institution, provided sign is removed within five days after the event.
  • Small, nonilluminated signs not exceeding two square feet strictly to identify restrooms, similar facilities, parking area entrances/exits and freight entrances, or for indicating the location or restricting the use of off-street parking areas.
  • Residence identification signs, not over two square feet, for a residential unit showing the name and address.
  • Signs displayed in a window indicating the availability of a public telephone or notary public and/or the possession of any required business licenses.
  • Holiday decorations displayed in season.
  • Temporary signs for tag or garage sales, provided the sign contains the name and address of the seller and date of the sale, is displayed only two days prior and removed the day after the sale.
  • "No trespassing" signs.

Sign Plan & Submission Notes for Elmsford

  • All sign permit applications must be referred by the Building Inspector to the Architectural Review Board for review and approval.
  • The Architectural Review Board may authorize variations from the standards and requirements of the chapter upon demonstration of good cause and in the interest of good design, where consistent with the purposes and intent of the chapter.
  • An application for a permit must include two blueprints or ink drawings of the plans and specifications for the sign and the method of construction and attachment.
  • Approval of the Electrical Inspector is required for illuminated signs before submission to the Building Inspector.
  • Permit applications must include information and documentation as required by the Building Inspector to show full compliance with all applicable laws, rules or regulations; this may be interpreted as requiring a sign plan or equivalent documentation.
  • Where a request does not meet district regulations, a variance (e.g. Zoning Board of Appeals for residential or demonstrated good cause and design for business/industrial) may be required.
  • In business and industrial districts, where multiple establishments are served by one off-street parking area entrance, a sign identifying all establishments may be required for each entrance pursuant to an approved site plan.

Source: ecode360 municipal code