Questions? Call us at (262) 218-2915

Sign Regulations in Hempstead Town, New York

Hempstead Town, New York has specific sign regulations covering 93 sign types across 16 zoning districts. Regulated sign types include Interior Sign (Not observable from exterior), Name and Address Sign (Wall), Professional Sign - Wall (Resident Practitioner). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hempstead Town, New York

Sample Sign Requirements in Hempstead Town

Sign TypeMax HeightMax AreaSetback
Political SignNot listed32 sq ft per faceNot listed
Professional Sign - Wall (Resident Practitioner)Not listed1 sq ftNot listed
Professional Sign - Detached (One Practitioner)Top of sign ≤ 6 ft above grade4 sq ft per faceGenerally at least 10 ft from any property line for signs erected under §244(A), except where §245(A) lists different distances for certain subsections (this sign is not listed as an exception).

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Hempstead TownFull Coverage

Sign Types Covered

93

  • Interior Sign (Not observable from exterior)
  • Name and Address Sign (Wall)
  • Professional Sign - Wall (Resident Practitioner)
  • Window Sign (Standard)
  • +2 more types

Zoning Districts

16

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hempstead Town

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

This page doesn't give a single height number for signs in Hempstead Town. The tables on this page quote the ordinance's height rules for the sign types we sampled. For example, the height rule for Professional Sign - Detached (One Practitioner) in the Residence Districts (A, AA, A1, A2, B, BB, C) reads: Top of sign ≤ 6 ft above grade. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hempstead Town require a permit. From the submission notes on this page: Edu-Cultural (E) District: Institutional identification signs must appear on and be approved as part of the site plan approved under §120; certain informational detached signs placed in public areas must also appear on the approved site plan. Run a code check for an exact address to see the permit requirements for that zone.

Hempstead Town's sign code covers 93 sign types, including Interior Sign (Not observable from exterior), Name and Address Sign (Wall), Professional Sign - Wall (Resident Practitioner), and Window Sign (Standard). Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Political signs tied to an election are permitted without a permit in all use districts, subject to limits: installed no more than 90 days before the election, removed within 10 days after, and maximum face area of 32 square feet. The full list is on this page.

This page doesn't list a single setback distance for signs in Hempstead Town. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Hempstead Town's sign ordinance that cover digital, changing, or flashing signs: Signs that directly emit, radiate or reflect any beam, ray or glare away from the lot, or that are in motion, animated, or have flashing or intermittent illumination or changing degrees of intensity, are prohibited in any district. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Hempstead Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hempstead Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Hempstead Town, New York Sign Rules at a Glance

Hempstead Town, New York regulates 93 sign types across 16 zoning districts. Directional Signs - On Private Service Roadways (8 sq ft) in the Business Districts (X) are capped at 8 sq ft per face. Most commercial signs in Hempstead Town require a permit.

Detailed Sign Ordinance Requirements for Hempstead Town, New York

Sign Rules by Zoning District in Hempstead Town (16 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1Not listed32 sq ft per faceNot listed
Residence Districts (A, AA, A1, A2, B, BB, C)17Clearance ≥ 10 ft over sidewalks; ≥ 18 ft over driveways; not above roofline/parapetDefault detached sign: 32 sq ft per faceNot listed
Residence Districts (CA)5Top of each sign ≤ 7 ft above grade8 sq ft per faceNot listed
Edu-Cultural Districts (E)12Detached: Bottom ≥ 7 ft; Top ≤ 15 ftDetached sign default: 32 sq ft per faceNot listed
Golden Age Residence Districts (GA)4Top of each sign ≤ 7 ft above grade32 sq ft per faceNot listed
Mitchel Field Hotel District (MFH)13Detached: Bottom ≥ 7 ft; Top ≤ 15 ftDetached sign default: 32 sq ft per faceNot listed
Levittown Planned Residence District (LPRD)1Not listedUp to 24 sq in per occupant (for name/address plate)Not listed
Business Districts (X)15Top of sign ≤ 15 ft above grade (definition)64 sq ft per face (definition)Not listed
Light Manufacturing Districts (LM); Industrial Districts (Y)13Top ≤ 15 ft64 sq ft per faceNot listed
Industrial Districts (Y)1Not listedNot listedNot listed
Marine Residence Districts (MA)11Bottom ≥ 7 ft; Top ≤ 15 ftDetached sign: up to 32 sq ft per faceNot listed
Marine Commercial Districts (MB)12Top ≤ 15 ft64 sq ft per faceNot listed
Marine Recreation Districts (MC); Marine Resort Districts (MD)12Top ≤ 15 ft (definition)64 sq ft per face (definition)Not listed
Gasoline Service Station Districts (GSS)4Not listed24 sq in per occupantNot listed
Coastal Conservation District - Woodmere Club (CC-WC) (Single-Family Residential Subdistrict)8Projecting clearances as stated; detached bottom ≥ 7 ft; top ≤ 15 ft24 sq in per occupantNot listed
Hempstead Turnpike - Elmont District (HT-E)1As stated for each Business X sign type aboveAs stated for each Business X sign type aboveNot listed

Zone-by-Zone Sign Requirements in Hempstead Town(sample of 3 of 16 zones)

Residence Districts (A, AA, A1, A2, B, BB, C)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Professional Sign - Detached (One Practitioner)Top of sign ≤ 6 ft above grade4 sq ft per faceNot listedGenerally at least 10 ft from any property line for signs erected under §244(A), except where §245(A) lists different distances for certain subsections (this sign is not listed as an exception).One per premises (one practitioner)On the same lot as the residence.Not listedUnlock§244(A)(2)(a)[1]; §243 Professional Sign def.; §247(A)-(B); §246(C)
Professional Sign - Detached (Multiple Practitioners)Top of sign ≤ 6 ft above gradeUp to 10 sq ft per face (1 sq ft per practitioner)Not listedGenerally at least 10 ft from any property line for signs erected under §244(A), per §245(A)(2).One per premises (serving multiple practitioners)On the same lot as the residence housing the practitioners.Not listedUnlock§244(A)(2)(a)[2]; §243 Professional Sign def.; §247(A)-(B); §246(C)
Religious Sign - DetachedBottom ≥ 7 ft; Top ≤ 15 ft above gradeDefault detached sign: 32 sq ft per faceNot listedGenerally at least 10 ft from any property line for signs erected under §244(A), per §245(A)(2).One detached sign per place of worship premisesOn the same lot as the place of worship.Not listedUnlock§244(A)(1)(b); Detached sign definition §243; §246(C)
Sale or Rent Sign - Projecting (Residential)Not listed2 sq ftProjection ≤ 30 inches from wall; overall projection ≤ 42 inches by projecting-sign rulesClearances and curbline offsets per projecting sign standards; otherwise governed by building face.One per premisesAffixed to the building wall of the premises being sold/leased/rented.Not listedUnlock§244(A)(2)(e); Projecting sign standards §243 (A–D); §246(C)
Information Sign - Museums/Libraries/Public or Parochial Schools/Governmental Safety or Legal Notices (Wall + Detached)Detached sign: bottom ≥ 7 ft; top ≤ 15 ftIf detached: default detached sign = 32 sq ft/face; For amenity-direction wall sign: max 12 inches in maximum dimensionNot listedDetached signs under §244(A) generally ≥10 ft from property lines per §245(A)(2).One wall and one detached per qualifying building (museum/library/school); plus small amenity-direction wall plates as listedOn the premises of the museum/library/school; or public areas for government safety/legal notices as applicable.Not listedUnlock§244(A)(1)(f)[1]-[2]; Detached sign §243; §246(C)
Subdivision and Acreage Sign (Detached)Bottom ≥ 7 ft; Top ≤ 15 ftDefault detached sign: 32 sq ft per faceNot listedAt least 30 ft from any property line per §245(A)(5).One per subdivision or parcelOn the subdivision or parcel advertised.Not listedUnlock§244(A)(2)(b); Detached sign §243; §246(C)
Development Directional Sign (Off-Site)Bottom ≥ 7 ft; Top ≤ 15 ftDefault detached sign: 32 sq ft per faceNot listedAt least 20 ft from any property line per §245(A)(4).One per subdivision (off-site)Off site, on property with written consent of the owner.Not listedUnlock§244(A)(2)(c); §245(A)(4); §246(C)
Construction or Occupancy Sign - Option 1 (Construction Team)Detached sign: Bottom ≥ 7 ft; Top ≤ 15 ftSwing/curb sign: 12 sq ft per face; Detached sign default: 32 sq ft per face; Wall sign: no explicit area statedNot listedDetached sign under §244(A) generally ≥10 ft from any property line per §245(A)(2).One temporary wall OR one temporary detached OR one temporary swing/curb sign (only one of these at a time)On the premises under construction/repair/renovation.Not listedUnlock§244(A)(2)(d)[1]; Swing/Curb sign def. §243; Temporary permits §246(A); Fees §247(A)(4)-(5)

Business Districts (X)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Detached Sign (Business Premises Identification/Advertising On-Premises)Bottom ≥ 7 ft; Top ≤ 15 ftUp to 32 sq ft per face (default)Not listedAt least 20 ft from any property line for detached signs (§245(A)(3)), unless average front setbacks on the block are <10 ft (then ≥10 ft).One per premisesOn the same lot as the business.Not listedUnlock§244(F)(2)(a); Detached sign §243; §246(C)
Wall Sign (Business Tenant Space)Not listed2 sq ft × linear foot of tenant frontageSign length ≤ 90% of tenant frontage; projection ≤ 12 inchesWall-mounted; must maintain clearances over sidewalks/parking if projecting over them (≥7 ft bottom per §246(O)).One per tenant spaceOn the exterior wall abutting a public street or public/private parking field.Not listedUnlock§244(F)(2)(b); Wall Sign definition §243; §246(C)
Directional Sign - On Private Service Roadways (8 sq ft)Not listed8 sq ft (per face)Not listedWithin property lines; 100-ft intersection spacing.As needed subject to spacingAlong private service roadways within business sites.Not listedUnlock§244(F)(2)(c)[1]
Directional Sign - Entrance/Exit Pairs (2 sq ft per sign)Top of each sign ≤ 7 ft above grade2 sq ft per face (each sign)Not listedNo extension beyond property line.One pair per curb cutAt curb cuts, wall-mounted or detached.Not listedUnlock§244(F)(2)(c)[2]
Multifaced or Double-Faced Detached Sign (On-Premises Parking Areas Only)Bottom between 7 ft and 8 ft above grade32 sq ft total face area per permitted signNot listedInstall and protect so as not to impede traffic; maintain general property line setbacks (≥20 ft if near property lines per §245(A)(3)).One per 100 parking spaces (fractional counts not specified; round per Town practice)Equally distributed within the on-premises parking area; not at property edge.Not listedUnlock§244(F)(2)(d)
Mobile SignTop of sign ≤ 15 ft above grade (definition)64 sq ft per face (definition)Not listedLocate to avoid visibility hazards and to comply with general corner-lot visibility (§245(B)).One mobile sign per premises at a timeOn the same lot as the business.Not listedUnlock§244(F)(2)(h)[1]-[6]; Mobile sign definition §243
Marquee SignBottom ≥ 10 ft above curb; cannot exceed marquee side heightNot listedMay extend to within 2 ft of curbline; cannot exceed marquee side lengthEncroachment allowed only as specified and approved; maintain 10-ft clearance above curb.As permitted per premisesOn marquee projecting over sidewalk/right-of-way with approval.Not listedUnlock§244(F)(2)(i)[1]-[2]
Facade SignNot listed≤ 1/3 of the facade areaSign length ≤ 90% of tenant wall width; projection ≤ 12 inchesWall-mounted; maintain 7-ft minimum clearance if any portion extends over sidewalk/parking/mall (§244(F)(3), §246(O)).One per exterior building faceOn exterior facades of the building.Not listedUnlock§244(F)(2)(k); Facade Sign definition §243

Light Manufacturing Districts (LM); Industrial Districts (Y)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Detached Sign (On-Premises)Bottom ≥ 7 ft; Top ≤ 15 ftUp to 32 sq ft per faceNot listedAt least 20 ft from any property line (§245(A)(3)), unless the block-average front setback is <10 ft (then ≥10 ft).One per premisesOn the same lot as the LM/Y use.Not listedUnlock§244(F)(2)(a); Detached sign §243; §246(C)
Wall SignNot listed2 sq ft × linear foot of tenant frontageSign length ≤ 90% of tenant frontage; projection ≤ 12 inchesMaintain ≥7 ft clearance if any part projects over sidewalks/parking (per §244(F)(3) and §246(O)).One per tenant spaceOn exterior wall abutting a public street or public/private parking field.Not listedUnlock§244(F)(2)(b); §243 (Wall Sign)
Directional Sign - On Private Service Roadways (8 sq ft)Not listed8 sq ft (per face)Not listedWithin property lines; 100-ft intersection spacing.As needed subject to spacingAlong private service roadways within LM/Y sites.Not listedUnlock§244(F)(2)(c)[1]
Directional Sign - Entrance/Exit Pairs (2 sq ft per sign)Top ≤ 7 ft above grade2 sq ft per face (each)Not listedMust be within property boundary.One pair per curb cutAt curb cuts, wall-mounted or detached.Not listedUnlock§244(F)(2)(c)[2]
Mobile Sign (LM/Y)Top ≤ 15 ft64 sq ft per faceNot listedPlace to avoid hazards/visibility obstructions; corner-lot visibility (§245(B)).One per premises at a timeOn the same lot as the LM/Y use.Not listedUnlock§244(F)(2)(h)[1]-[6]
Marquee Sign (LM/Y)Bottom ≥ 10 ft above curb; within marquee side heightNot listedWithin 2 ft of curbline; not beyond marquee side lengthAs approved; maintain 10-ft clearance above curb.As permitted per premisesOn a marquee over sidewalk/right-of-way (with approval).Not listedUnlock§244(F)(2)(i)[1]-[2]
Facade Sign (LM/Y)Not listed≤ 1/3 facade areaLength ≤ 90% of tenant wall width; projection ≤ 12 inchesMaintain ≥7 ft clearance if extending over sidewalks/parking (§244(F)(3); §246(O)).One per exterior faceOn exterior building faces.Not listedUnlock§244(F)(2)(k); §243 (Facade/Façade Sign)
Arcade/Covered Mall Blade Sign (Small)Not listed6 in × 18 in (no-permit size)As aboveNot listedOne per establishmentWithin arcades/covered malls.Not listedUnlock§244(F)(4)

PermitPal covers all 16 zoning districts in Hempstead Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Hempstead Town

  • Signs may not be attached to fences, trees, utility poles or similar supporting devices, or to vacant or unoccupied structures; signs may not be located so as to obstruct pedestrian or vehicular visibility or create a public hazard or disturbance (applies townwide).
  • Signs that directly emit, radiate or reflect any beam, ray or glare away from the lot, or that are in motion, animated, or have flashing or intermittent illumination or changing degrees of intensity, are prohibited in any district.
  • Signs shall not be painted on the exterior wall surface of any building or structure; existing painted wall signs must be removed/obliterated by the stated compliance dates.
  • Surfboard signs (flag-on-pole type defined by the ordinance) are prohibited in all use districts.
  • No sign shall cover any door, window or required opening, or hinder or prevent free and accessible ingress or egress to or from any door, fire escape or stairway.
  • Nothing shall be attached to or suspended from any sign erected pursuant to the article.
  • No portion of a sign may project out, over or into a sidewalk, parking area or mall unless the lowest portion of such encroachment is at least seven feet above grade.
  • No signs may be erected or maintained on corner lots at intersecting streets if they interfere with traffic visibility across the corner.
  • Erection or maintenance of signs other than those permitted in the designated use districts is prohibited unless a variance has been granted by the Board of Zoning Appeals.
  • No sign is permitted except as provided in the sign article or as authorized by the Board of Zoning Appeals.
  • No permit will be issued for any sign using untreated or unpainted wood structural members (wood must be painted or treated to resist decay).

Exempt Signs in Hempstead Town

  • Political signs tied to an election are permitted without a permit in all use districts, subject to limits: installed no more than 90 days before the election, removed within 10 days after, and maximum face area of 32 square feet.
  • Any authorized sign may contain noncommercial copy in lieu of any other copy (content-neutral substitution allowed).
  • If a sign permit is currently in effect, no new/additional permit is required to: replace or alter changeable copy on a marquee; change copy on a painted or printed sign; paint, clean, maintain, or make minor nonstructural repairs or part replacements; or remove and replace window signs with different copy provided prior conditions are met.
  • Permit fees may be waived for signs used for religious, charitable, eleemosynary or educational purposes when owned and located on the institution’s premises, or for signs used by federal, state or municipal governments (fee waiver only; all other requirements still apply).

Sign Plan & Submission Notes for Hempstead Town

  • Any sign not permitted by the sign article requires approval/variance from the Board of Zoning Appeals before the Commissioner of Buildings may issue a permit; the BZA considers district character, other nearby signs, necessity to the primary use, potential interference with light/air or aesthetic/property values or public welfare, and Town Law §263 purposes.
  • HT-E (Hempstead Turnpike - Elmont District): Design Review Board approval is required prior to issuance of a sign permit or building permit for properties in the HT-E District; the DRB applies the HT-E Design Guidelines, issues a written determination within 30 days of a complete application, and decisions are appealable to the Board of Appeals.
  • Edu-Cultural (E) District: Institutional identification signs must appear on and be approved as part of the site plan approved under §120; certain informational detached signs placed in public areas must also appear on the approved site plan.
  • Marquee signs that extend beyond the street line require approval of the Town Highway Division (in addition to any sign permit).
  • B-MX (Baldwin Mixed-Use Overlay): Projects are subject to design guidelines reviewed by a Design Review Board; the text indicates DRB review using the B-MX Design Guidelines and Checklist, though it does not expressly condition issuance of a sign permit on DRB approval.

Source: ecode360 municipal code